Which Emergency Blade for Xhorse XM38 Toyota?

 As titled,  which emergency blade fits in Xhorse Toyota xm38 smart key?

Toy40, but after some “improvemets” you can fit toy48.

The standard xhorse flip blades work in these, but i found you have to modify inside the shell a little bit removing some of the plastic in the track where they slide in and then they work perfect.

If you try to fit a toy48,then the secret is shave down the bottom of the blade(make it narrower).
If you pop the shell open it takes like 10 seconds with a utility knife. Pretty cool.

Clone Jeep Grand Cherokee GPEC2 by Xhorse Multi Prog

 Xhorse Multi Prog new user feedback:

GPEC2 clone for Jeep Cherokee %100.

Model: Jeep Grand Cherokee

Year: 2014

ECM: FCA Continental GPEC2

Mode: Boot mode

How to Get MLB CS PIN with VVDI MLB Tool

By using with Xhorse VVDI MLB Tool, we can get the synchro, CS & Pin from the original key for backup. After successful MLB data collection and calculation, this data is available after the dealer key was generated. Detailed steps are as follows:

Step1. Identifiaction Key

Please place the key in the device identification area for identification.

Step2. Collect Key Data

Open the original car key, connect the original car key PCB as shown in the diagram, and click the collect key data button after connection. It will take about 3-4 minutes. The server takes approximately 10s to calculate. After the calculation is completed, please save the calculation results.

Step3. Make Dealer Key

Load the calculation data saved in the step2 and generate dealer keys. Then use VVDI2 or KEY TOOL PLUS for key learning.

Run VVDI2 software and select correspoding vehicle software, i.e Audi
Select Key Learn->MLB Immobilizer System.

Upload data read by MLB tool. Then you will get CS and PIN.

Generate MQB49 5C Remote with VVDI Key Tool Plus

 New user feedback: VW TCROSS 2023 MQB49 5C add key successfully with xhorse vvdi key tool plus.

Generate Xhorse XSMQB remote under MQB49/5C (NEW) option

Then add key with vvdi key tool plus. Need sync data.

Xhorse XM38 Toyota C-HR Prox Not Working Solution

 Problem:

2020 Toyota c-hr all keys lost. The customer had purchased one key from dealer. Programmed it with autopropad no problem!! And works fine. Then he asked if I could do a second key and I only had universal xhorse xm38 Toyota so I when and added second key! Now the car took the fob and it show same readings but it only works the remote part not the immo like if the key wasn’t programmed, I’ve already tried messing with the frequency and proximity power nothing changes. The car show 2 fobs programmed but only the oem works, any advice??

Solution:

1).

Frequency issue.

Easy just change the frequency to 314.50 on all frequency options after programming it to the car. Worked for me. Also there are two options for C-HR.

2).

The same thing happened to me a couple of days ago Toyota C-HR 2019 generates the remote PCB 0010 of frequency 314 and there was no proximity I increased intensity and tried everything nothing worked, and so as the key was I put it in the device and generates the PCB 0410 frequency 315, after that the key worked proximity and everything perfect I do not know why but I did not have to do again the add key because so no more already worked the key.

Better use original key for most of them if it is A9.

www.vvdishop.com