Xhorse Multi Prog and VVDI Prog Pinout to Benz SPC56AP60L3 Airbag

 Model: Mercedes Benz W238

Part number of airbag module: A2389008100
Processor MCU Chip inside: SPC56AP60L3
Tool used: Xhorse Multi Prog

Read and write modified dump to SRS with multiprog.

No fault code stored in srs control unit.

VVDI Prog also read this airbag module.

Pinout to vvdi prog

CPT 2 –> VVDI VCC RED
CPT 3 –> VVDI TDO GREEN
CPT 4 –> VVDI TDI PURPLE
CPT 6 –> VVDI RESET YELLOW
CPT 7 –> VVDI TMS BLUE
CPT 8 –> VVDI TCK BROWN
CPT 9 –> VVDI GND BLACK

Xhorse Multi Prog Pinout to Renault Clio IV HFM V850

 Here comes the wiring diagram pinout of Renault Clio IV HFM ( Hands free module) to Xhorse multi prog programmer.

Credit to Ballongue.

MCU RENESAS V850 D70F3633

for reading:

Go to MCU->Renesas ->V850->D70F3633
not by Other -HFM

VVDI Key Tool Plus Device Shows no Voltage Solution

 Problem:

I want to program the elv with xhorse vvdi key tool plus on bench. I have supply outside Power to MB fast adapter. I still get no power. No voltage displayed.  Programmed 3 mercedes keys until now
But cannot do ELV.

Photo attached:

Here is the possible solution.

Remove adapter and connect OBD cable, do a Kline self-test.

Go to immo programming——More functions——Device test——K-line test

If there is voltage without adapter, key tool plus device is no problem. Connect Benz adapter as follows, if there is no voltage, the Benz adapter is broken. Replace new adapter and try again.

www.vvdishop.com

VVDI2 Program VW Beetle 2005 All Keys Lost via OBD

 VW Beetle 2005

All Keys Lost
Normally soldering to cluster to read MCU and to get PIN.
Many programmers struggle to pull the correct pin.
Quick Tip:
Read eeprom as MM Direct 2000- by OBD
Will get you pin – adaptation with VCDS or Xhorse VVDI2 or any other tool. Here vvdi2 was used.
This way learning only take 5 minutes and no soldering or dash out.

Solve Xhorse Dolphin XP005 Error Code 70

Problem:

The new Xhorse Dolphin XP005 key cutting machine had error code 70. How to fix it?

Error: 70.
Found available firmware update incomplete.

Solution:

Update firmware.
If failed to update firmware via mobile phone, update it via Xhorse Upgrade kit.
Update firmware to 2.2.8.