How to Obtain Points for VVDI MLB Tool

Xhorse VVDI MLB Tool will program VVDI MLB key and original MLB key. It does not consume points when using VVDI MLB keys. But it does require 200 points when calculating data using the original MLB key.

Some customers asked how to get points for the MLB-Tool. Here is the clue.

Combine your VVDI MLB Tool with your Xhorse account in App first, the device will automatically deduct the points from the account when calculating online.

You don’t need to transfer points to the MLB-tool device. It will automatically deduct points from your account.

If your Xhorse account does not have any points, you can obtain points by generating brand new Xhorse universal remote keys.

How to get Xhorse Bonus Points from VVDI Remotes?

VVDI PROG VW Polo MQB D70F3526 Try Frequency Failed Solution

 How to read immo data from a Volkswagen Polo of cluster using the Xhorse VVDI PROG + MQB48 Solder Free Adapter? Initially, I’ve met an “Try Frequency failed(00)” error that prevented successful data extraction. But after some troubleshooting, I was able to identify and fix the issue.

The following are the procedure:

Open the VVDI PROG software,

Type: 5-DASHBOARD

Brand: VOLKSWAGEN

Chip: MQB-LOCK(D70F3526)-READ(ADAPTER)

Follow the diagram to install MQB board & the XDNP79 solder-free adapter, then connect to VVDI PROG and 12 volts power.

Click “Read”.

Unfortunately, we have an error here.

It says:”Try Frequency failed(00)”.

It took me long time with so many hours to find the solution for the error.

And now it’s very easy.

Just take a separate wire to connect the VVDI PROG for 3.3 volts and clamp FLMDO pin on the adapter.

Make sure you don’t touch any other pins.

Let’s try to read again.

If all the pins are touching correctly the board now, we should read the immo data.

This may take about 10 minutes……

Reading success.

Save the data file.

Disconnect all the 12 volts & VVDI PROG, let’s connect to VVDI2.

Open VVDI2 software,

Key learn >> MQB platform instrument immobilizer >> Instrument with locked NEC35xx(MQB48, VDO/JCI)

Decode immo data >> Yes >> Upload the saved file

Press OK to save MQB48 immo data file.

Now you’ve successfully got the MQB immo file, it can be used for key adding.

www.vvdishop.com

How to Solve VVDI Key Tool Plus ‘No Device Language List’

 Problem:

One of our customers reported that his Xhorse VVDI Key Tool Plus has no response, press any function button always show the same error “No Device Language List”.

Press Setting icon, still the same. Don’t allow to change language setting.

Solution:

Swipe up on the screen, exit the app, and try again.

Feedback:

Yes, it is working.

www.vvdishop.com

VVDI MLB Tool Calculation Failed Error Code Solution

 Problem:

One of our customers tried to add a spare key to Audi Q7 2020 with the Xhorse VVDI MLB Tool. However the tool failed to collect key data.

Error “Key data calculation failed”.

Common Issues with Collection Failures

• VCC1 and VCC2 are reversed.
• The capacitors were removed incorrectly or not removed.
• Short circuit in soldering.
• Data collection requires wireless reading of the key simultaneously; if the key is not positioned correctly, it will not be detected.

Check the above and collect key data again.

How to See Xhorse Dolphin XP005 Battery Information in App?

 How to Check Xhorse Dolphin XP005/XP005L Battery Information?

In Xhorse App, go to Device Information->Key Cutting-> Power->Check battery information

Need to connect dolphin with Xhorse App to read battery information.

If it is XP005L, you can check battery information on the App or in the device (go to Battery information).

If the battery cannot charge or has other problems, do following:

1. Take a video of power on and off and send to us

2. Send a screenshot of battery information

3. If cannot read battery information, follow this way to test battery voltage and send test results to us.

The Xhorse engineer will check if battery needs replacement.

https://www.vvdishop.com/service/replace-xhorse-dolphin-xp005-battery.html