How to Solve Xhorse Dolphin XP005L Error Code 6

 Problem:

One of our customers failed to calibrate the Xhorse Dolphin XP005L key cutting machine. The dolphin ii reported error code 6 during the calibration process.

Possible solution:

Open the back cover and adjust the X-axis sensor or baffle.

User feedback:

He checked and found this part is broken.

Final solution:

Need to replace the X-axis sensor.

Better replace the sensor of other axes to the X-axis and do an X-axis motor test first to see if there are any other problems.

Then send the test result to us.

www.vvdishop.com

How to Read BMW EWS4.4 EEPROM with Xhorse Multi Prog

 You can read BMW EWS4.x immo box by soldering or with Xhorse EWS4 solder free adapter. Here we show how to read EWS4.4 with Xhorse Multi Prog via soldering.

Remove EWS4.4 immo box

You will need mcu adapter to read this data.

Run Multi Prog software, select Immobilizer->BMW->EWS4.x BMW

Check wiring diagram

Solder wiring to the EWS4 module via multiprog MCU adapter

Read data

Read chip eeprom very fast. 33s only.

Now you can write key with vvdi2 or other programmers using this dump.

www.vvdishop.com

How to Solve VVDI Prog BMW CAS3+ 0l15y Chip Crack Failure?

 Problem:

Trying to read BMW CAS3+ 0L15Y eeprom with xhorse vvdi prog and XDNP11 CAS3 solder free adapter. Reads ID ok but failed to read and reported error chip crack failure. Any solution?

Solution:
1. Keep vvdiprog software update to date.

2. Double the connection.

3. Adjust VPP voltage (2.7/3.3/4.5) and try again.

How to Read Opel Insignia PIN Code with Xhorse

 Possible to read pin code for Opel Insignia with xhorse vvdi mini obd tool?

Yes, it is possible and easy to read pin code for Opel Insignia. Do the same in vvdi key tool max pro.

Go to IMMO Programming->Opel->Read PIN Code->Select Type 5 (IPC)
Read 4-digit pin code successfully.

Then you can add key with pin code.

User feedback:

Opel Insignia, successfully key Add.
Done very simple in 20 min.

Tips to Measure Xhorse Dolphin Battery Voltage with Multi-meter

 We have already shown how to remove the shell and test the battery voltage for Xhorse Dolphin XP005/XP005L key cutting machine.  Some people don’t know how to measure voltage.

Here we will show how to measure battery voltage in detail.

It’s best to take photos to ensure that the gear and pins are correct.

1. Select DC power supply gear, please measure the voltage of these two pins of the battery on the picture below and send us the test result.

2. Please measure the voltage of these two pins of the mainboard follow the step below and send us the result.

First, unplug these two cable on the motherboard

Turn the multimeter to this setting (Diodegear)

Measure the volts of these two pins, and take us a photo like this.

and measure these other two pins value.
(Note the color of the meter pens in the diagram)
www.vvdishop.com