VVDI Key Tool Plus Add Subaru Ascent 2019 Key

What’s up guys! Today I’m gonna show how to add a smart key for 2019 Subaru Ascent with Xhorse VVDI Key Tool Plus by OBD. So let’s get started.

Immo programming >> Subaru >> Select from model >> Ascent >> 2019 >> With smart >> Start programming >> Key count

Key Tool Plus display the number of matched keys: 2

Add a key >> Yes

During matching, make sure all doors are in their current positions.

Keep a matched key close to start button…

Checking ID code, please wait…

Please place the keys to be matched close to the start button in turn within 60 seconds.

The number of matched keys=2

After all operations are completed, click OK to go to the next step.

Number of registered keys: 3

Please turn off the ignition.

Please turn on the ignition with each matched key in turn within 60 seconds.

Number of keys registered: 3

Note:

1. The key should be located in the car, near to the ignition switch button(ignitable area).
2. During matching, please ensure that all doors remain in their current positions.

Check two keys, both the original and the new one can work.

Perfect done.

www.vvdishop.com

Clone Kia MEG17.9.12 ECU with Xhorse Multi Prog

 Xhorse Multi Prog user feedback: Kia Bosch MEG17.9.12 ECU Infineon TC1762 full clone successfully.

Select Kia Bosch MEG17.9.12 ECU.
Bench mode.
Read INT eeprom and INT flash.
Write INT eeprom and INT flash.

Citroen Airbag SPC560P50L3 Pinout to Xhorse VVDI Prog

 Sharing airbag pinout to Xhorse VVDI Prog programmer.

Tested works yesterday. Works fine on Citroen Berlingo 2023.

Pinout to Citroen airbag SPC560P50L3

In vvdi prog software, select

2-MCU

ST-SPC560XXX

SPC560P50L3

FYI:

Here is the pinout to CITROEN C3 2019 Airbag CONTINENTAL 9829442880 A2C18747303 WITH SPC560P50L3.

Xhorse Adds Renault 2016- Key Programming

 Xhorse VVDI Key Tool Plus and Key Tool Max Pro released Renault and Daica Immobilizer software update on November 11th, 2024.

Xhorse is once again setting a new benchmark with a groundbreaking update to its IMMO database, specifically targeting RENAULT and DACIA vehicles. This vital update empowers automotive locksmiths to provide their customers with the most reliable, cutting-edge security solutions available today.

Before releasing this crucial update, Xhorse conducted extensive on-vehicle testing to ensure its reliability, safety, and efficiency, guaranteeing that the latest features meet the highest standards of performance.

Add following Renault and Dacia IMMO key programming models:

Renault

Smart Key

SCENIC 2016-
MEGANE 2015-
MEGANE SCENIC 2016-
QM6 (SAMSUNG QM6)
SM6 (SAMSUNG SM6)
TALISMAN 2015-
KADJAR 2016-
KOLEOS 2016-
ESPACE 2015-

Flip Key
MEGANE 2002-2008, 2008-2015, 2015-
SCENIC -2006, 2006-
MEGANE SCENIC 2002-2008, 2008-2015, 2015-
MODUS 2004-2012
CLIO 2006-2012
CLIO III
SM5 (SAMSUNG SM5) 2003-2004 2005-2009
SM6 (SAMSUNG SM6)
SM7 (SAMSUNG SM7) 2003-2004 2005-
QM6 (SAMSUNG QM6)
DUSTER 2014-2018, 2018-
KANGOO I
KANGOO II 2008-
KANGOO III 2020-
TRAFIC II Ph2
TWINGO I Ph3 2001-2006
SOLENZA
PRIMASTER
ESPACE 2015-
MASTER 2011-2016
KADJAR 2016-
TALISMAN 2015-
KOLEOS 2016-
SAFRANE 2009-
OROCH 2016-
ALASKAN 2016-
DOKKER LOGAN 2010-2013, 2013-
SANDERO 2013-2020
LODGY KWID (BRAZIL) 2023-2024
SYMBOL 2013-2018
TRIBBER 2014-2018
LAGUNA 2007-2011

Dacia
Flip Key
DOKKER
LODGY
DUSTER 2014-2018
SANDERO 2013-
LOGAN 2010-2013, 2013-

With the automotive industry increasingly shifting toward more sophisticated, secure technologies, the ability to stay ahead of these developments and seamlessly integrate them into your services will be a key differentiator for professional locksmiths.

This update is a prime example of Xhorse’s commitment to helping you remain at the forefront of the industry, ensuring that you can continue to offer top-tier security solutions to your customers.

https://www.vvdishop.com/info/xhorse-renault-dacia-immo-update-nov.-2024.html

Xhorse Multi Prog Read VAG DQ250 with Godiag GT107 on Bench

 Here vvdishop.com shows how to read VAG DQ250 transmission gearbox TCU with Xhorse Multi Prog programmer and Godiag GT107+ DSG adapter.

To connect multi prog with GT107+ DSG adapter you also need a Godiag G-V ecu cable converter like this.

Here is the overall connection diagram.

Connect multi prog with Godiag G-V ECU cable and GT107+ DSG gearbox adapter

Connect DQ250 gearbox with GT107+ jumper cable

Connect multi prog with PC via USB cable and power adapter, turn on multi-prog programmer.

Run Multi prog software, quick search DQ250 gearbox type

Read INT eeprom

Connects with gearbox, you can see voltage and current on the GT107+ adapter.

Read int eeprom successfully. Save INT eeprom.

Read INT flash and save.

Then read EXT eeprom and save.

www.vvdishop.com