How to Program Toyota Smart Key with Xhorse Mini FT OBD Tool

 How to erase and add a smart key for your Toyota vehicle using the VVDI Key Tools Max and Xhorse FT-OBD tool. This is a step-by-step guide on how to program a Toyota Camry smart key using the Mini FT tool. You can also run App on a mobile phone instead of key tool max. The Xhorse FT-Mini OBD tool is a Toyota specific tool that can be used to program smart keys for a variety of Toyota models, including the Toyota Camry, Sequoia, RAV4, and 4Runner up to 2023. We will demonstrate how to use the Xhorse FT-OBD tool to complete the programming process. With these tools, you’ll be able to delete and add smart keys with ease. 

Take an example of Camry 2015 smart key.

Select IMMO Programming- Select from model- Camry- KeylessGo- 2013-2017 Type 1(8A-Page P4 88)

If all keys lost, you need to perform all these steps.

Step 1: Read EEPROM data
Step 2: Generate emergency key
Step 3: Add keys

Here just add a spare key, so choose Adding Keys.

Select Clear smart keys.
Turn the ignition to ON position.

Xhorse FT OBD Tool detects that 1 key was registered.

Touch the ignition with a registered key within 30s.

Erase key successfully.

Select Add smart keys
Turn the ignition to ON position.
Keep the ignition switch with a registered key with the marked surface within 30s.

Key detected. prgramming…
Keep the key touching the igntion switch.

Register a new key successfully.

Test the new key and remote control.

Check:

https://www.vvdishop.com/service/how-to-bine-xhorse-ft-mini-obd-tool.html

VVDI2 and Multi Prog Change VAG MQB 5A Cluster Mileage

 Xhorse Multi Prog and VVDI2 are possible to change the odometer for VAG MQB 5A cluster. You can read it for immo.

Besides being able to make lost keys (Read micro v850 and rh8505a), Odometer also works.

Example:

Mileage change rh850 5a
With multiprog.
Everything ok.

Original mileage 52,216 km

Desired mileage: 890km

Xhorse VVDI Key Tool Plus Add Skoda Octavia 2016 MQB Key by OBD

 Successfully added a spare key to Skoda Octavia III 2016 VRs MQB using Xhorse VVDI Key Tool Plus.

– Start to finish ~8min.
– KD ZB remote.
– All step obd.
– Remote sync needed after programming (driver door manual procedure).

VDO MQB35xx 2014-UDS
Chip type: D70F3537

Select Key Adding automatic wizard menu.

Step 1: Read and save eeprom
Step 2: Read and save immo data.
Step 3: Reset instrument, clear DTC, sync instrument time
Step 4: Generate dealer key
Step 5: Learn key

www.vvdishop.com

How to do Xhorse Key Tool Max Pro Self Test

 If your Xhorse VVDI Key Tool Max pro fails to start communication with vehicle and asks to check if the OBD wiring is normal, follow guide below to do a device self test.

VVDI Key Tool Max Pro Self Test

In main menu select IMMO Programming

Select More Functions

Press Device Test

Select K-line Test

Short Connect PIN7 and PIN15 with the OBD connector.

If Key Tool Max Pro says the test failed, there is something wrong with the device. You may need to send it back for repair.

https://www.vvdishop.com/service/vvdi-key-tool-max-pro-self-test.html

How to Cut VW Passat CC Plastic Key with Xhorse Condor

How to cut plastic car keys using Xhorse Condor XC-Mini Plus? The VW Passat/CC and old BMW all have plastic keys for emergency blade, so this is a very useful tip for locksmiths. You can follow the tip if you have any other Xhorse Key Cutting Machine.

*You can’t nornally just put the plastic key on clamp for direct decoding or cutting.

• You should LISHI the door or figure out the bitting codes at first.

• Then once you do that, put a metal key on the clamp and perform “Cut Key”. When the probe dedects it, pause Xhorse Condor machine right before it starts cutting.

• Change the metal key into plastic key and put it on the clamp.

• Hit “Cut” to continue key cutting. You can just repeat the same operation for the other side cutting.

That’s the key we cut it now. Let’s test it.

Yep, so it does work, it can open the door.

Done.

www.vvdishop.com