How to Modify Xhorse XM38 Frequency for Toyota Corolla 2023

 How to find the key for 2023 Toyota Corolla Push with vvdi key tool max and XM38 Toyota?

Here is the clue.

Successfully generated Xhorse XM38 key with key tool max.

Use the Corolla 2561/1320 ID4A FCC ID HYQ14FBW option.

It works to lock and unlock the car, we modify the frequencies.

Trunk should be 09
Panic 10
Lock 01
Unlock 02

Frequencies should be like that. This is a perfect key. The key works just flawlessly. It starts the car.
If you guys ever need a 2023 Toyota Corolla this is how you’re going to generate that.

www.vvdishop.com

How to Solve Xhorse Multi Prog BMW CAS3 Chip Crack Failed?

 Here comes the solution to Xhorse multi prog BMW CAS3 chip crack failed problem.

Problem 1:

Read CAS3 0L15Y with multi prog, it says chip crack failed and asks to increase the voltage.

Problem 2:

Read and write a CAS3 from BMW 116 2007 model with multi prog…….. finally it manage to read and write (to remove ELV) but with problems. It starts reading the eeprom and it read it just fine,  the tool works great with this… but when i start to read the flash, the tool couldn’t read it and suggested me to increase the voltage, I increase the voltage and the half of my attempt to read the mcu the multi prog couldn’t do it.

Solution:

Bad connections. You need to clean off the coating bmw put on the pcb board and then it will work.

You will get chip crack error if a pin isn’t making a perfect connection. You can use a special pen that removes the coating on it.

Multi prog reads with no problem. Do not connect XCLS screen and check connections one of the pins is incorrectly marked in the xhorse description.

If pin is correct, then try to increase voltage to 4-5V, try again.

You can also use the XDNP11GL CAS3 solder free adapter.

Feedback:

Done, one pin has bad connection. Redo every solder.

After reconnecting all needles tried again and succeeded.

Xhorse Multi prog Hyundai MEG17.9.13 IMMO OFF

 Xhorse Multi Prog read and write Hyundai KEFICO MEG17.9.13 ECU on bench successfully.

Select Hyundai->Kia MEG17.9.13

Check wiring diagram

Connect Multi-prog with ECU following the pinout.

Read INT eeprom

Read INT flash

Back up data successfully.

We are going to do IMMO OFF.

Upload the modified IMMO OFF file and write flash.

Multi prog will ask you to do a checksum correction.

Checksum calculation successfully.

Write flash until finished.

www.vvdishop.com

VVDI MB Benz Power Adapter vs Key Tool Plus Power Adapter

 Xhorse VVDI MB Tool and VVDI Key Tool Plus use different MB power adapter for Benz password fast online calculation.

These power adapters cannot be mixed used, otherwise, you will get “MB Power Adapter Response Error”.

They can be identified by their appearance.

This is the MB power adapter for VVDI MB. It has 1 hole on 1 side only.

This is the MB power adapter for Key tool plus. It has 1 hole on both sides.

Program Volvo FM Truck 2008 Key with VVDI Key Tool Plus

 User report: Volvo FM truck 2008 making a second spare key using xhorse vvdi key tool plus successfully.

Make key by dump. eerpom 93C66. You remove the gauges and the immo box sits behind it. The chip cannot be cloned.

In Immo data tool, choose make via option Volvo -Trucks FH12 (93C66)
PCF7935 transponder.

Make key via super chip xt27a.