Xhorse Super Chip Benz W461 ID33 Key Not Working?

 Problem:

It is a  Mercedes G 300 Worker (W461) year 2012, chip ID33. Chip clone with vvdi super chip and mini key tool success, but starting no.

Its an OBD or read on bench job?

Solution:

It is an ID33 rolling and can’t be cloned. It will clone successfully but won’t start the vehicle more than once. It’s a rolling code transponder.

It works on Renault and other mid-range vehicles, but it doesn’t work on Mercedes because it’s a rolling code, it only turns on once and then it doesn’t function anymore.
You can’t generate those chips with the majority of the programs, only tango original,kr55 or avdi original. If you don’t have it you can’t get it done, and it’s an EEPROM job the mcu has to be desoldered.
Take out immo read with programming tool (best desolder MCU ) generate chip with and key tool ( even Gambit can do the chip by dump ) tango, zedbull , anything that makes old mercedes with id33.
The process is simple to ews keys for BMW.
Kr55 best one tool for whole job if you have it.

http://blog.vvdishop.com/possible-to-clone-ews3-ews4-key-with-xhorse-super-chip/

FYI:

Clone Renault Clio ID33 car will start. ID33 for clio is fixed code, not rolling code as Mercedes.

Xhorse Dolphin XP005 VW Golf Audi HU162T Key Cutting Instruction

 How to Cut VW Golf 7 hu162T with xhorse dolphin xp005 or xp005l? Dolphin does not show what type of hu162t it is.

First of all, check the key type by your eyes.

VW Golf7 has HU162T 9 cuts.

Xhorse Condor/Dolphin VW Audi New HU162T 9/10 Cutting Instruction

In Key bitting, select HU162T-10 or HU162T-9
For example, HU162T-9

Select 9 cuts and Side B

After cutting the front, go back to the previous page, choose to learn or input the 3 cuts on the side of the key, and choose the D side for the clamp. At this time, a blank HU162T key blank is required to be clamped by the auxiliary clamp.

Program Xhorse ELV Emulator with VVDI Key Tool Plus

 How to program Xhorse ELV emulator with vvdi key tool plus tablet?  Follow the instructions below step-by-step.

Main Procedure:
1.Calculate Password
2. Load EIS data and paste password
3. Clear TP and Personalization, Write ESL data

When operating on the car, you need to clip the K-line of the EIS. The EIS has a plug connection with four wires on it.
Remove the thinnest wire harness and clip with Blue OBD wire clip before operation. Don’t need to clip the kline of EIS if do it on bench.

Let’s move to details (bench mode).

1. Calculate password

Install Xhorse ELV emulator or Mini ELV emulator

Turn on ignition switch

Go to Immo Programming-> Benz-> Select from system-> Password calculation-> Read BE key password

Insert VVDI BE key into induction coil

Read BE key password successfully, take a screenshot of the password

2.

Go to EIS Tools, Start programming
Select Auto Detect (CAN)
Xhorse Key tool plus detects as W172 W204 W207 W212 with ELV
Select Read the EIS data via OBD
Save the EIS password

3.
Then Select ESL Tools function, start programming
Select OBD W204 W207 W212

The key tool plus adds a Process Wizard Mode menu, you can either use this menu to finish programming ELV emulator or manual write ESL data and follow prompts until finish

Manual way:
Select Write ESL data
Load the EIS data
Then Write ESL data
Automatically fill in the SSID and key password
Write data success

Program ELV emulator successfully. Turn on ignition with the BE key.

If done on bench, put everything back to vehicle.

www.vvdishop.com

Can Xhorse Dolphin XP005L Cut Dimple Keys

Question: Has anyone ever cut dimple keys on an Xhorse Dolphin XP005 or dolphin XP-005L.

No, Dolphin xp005 and xp005l will not cut dimple keys.  Xhorse Condor II or Dolphin XP007 will do.

Some other frequently asked questions about xhorse key cutting machines and dimple keys:

Q: Does condor mini plus ii cut dimple keys like keso, kaba?

A: Yes it does. Require M5 clamp.

Q: What cutter to use with condor 2 to cut dimple keys?

A: Dimple cutters are optional accessories and are available separately.

Q: What cutter to cut dimple keys with dolphin xp007?

A: With the original cutter in the xp007 package.

Q: Where to get cutters for dimple keys for this machine XP005?

A: No possible with xp005, go for Condor II.

Q:Which xhorse key cutting machine will cut dimple tibbe and barrel keys?

A: Condor II.

Q: Will Xhorse Condor ii customize dimple key?

A: Yes, it will.

Q: Can the Condor XC-Mini Plus II machine copy dimple keys directly and by code… e.g. Abus, Bks, etc.?

A: Yes, it can.

Q: Can the condor ii cut Yale Dimple key like this?

A: Yes, it will.

Q: Will Condor II cut multi lock dimple keys?

A: Yes, Dolphin XP007 will do as well.

Here is an example with condor ii

http://blog.vvdishop.com/xhorse-condor-mini-plus-ii-duplicate-mul-t-lock-dimple-key/

How to Unlock Chrysler 6 Buttons Fobik with Xhorse Key Tool Max

 The Chrysler 6-button Fobik key fob is cheap $8 only.  But if the key wasn’t programmed to car and did not work so we can renew it.

Unlocking and renewing a 6-Button Fobik key fob using the Xhorse VVDI Key Tool Max

Select Remote Renew-Remote Renew- Chrysler/Jeep/Dodge- IYZ C010C M3N5W785

Check wiring diagram and connect remote with xhorse key tool max via renew cable

Press UNLOCK

Renew in process, wait until finished

Now the remote works successfully.
We can also get the actual renew adapters that xhorse sells. It’s much easier and less time consuming than soldering the wires to renew. It also helps renewing when you try to find some of the older BMW or Mercedes keys that are always sold out that you can buy used keys that need renewed.