Xhorse Program 2013 Subaru BRZ 93C86 Key via Dump

 How to use Xhorse VVDI Mini Prog to read 2013 Subaru BRZ EEPROM on an ECU certification module? It’s not allowed reading by pressure, but can work with EEPROM adapter. Following I’m gonna show the procedure.

Preparation

As you can see, this is the EEPROM MCU what I’m going to remove. I covered with aluminum foil so that the aluminum foil can absorb most of the heat.

It’s always very imperative and important that you mark position 1 on the chip until closest place on the board. Or you can remember where 1 is at. But on this board, it’s particularly right here where it says R074. There’s a little narrow pointing into pin number 1.

I’m gonna line it up into the XDNP10 EEPROM Adapter chip slot.

Read EEPROM Data

Go to Mini Prog app:

EEPROM and FLASH >> SEIKO >> S-93C86BD >> Read >> EEPROM >> Start operation

Press START button on Mini Prog.

Press “Save and edit”, we can see the data directly.

Save the file.

Data file path:

File management >> Local file >> Date >> File

Put the other key to VVDI Key Tool Plus or something tool like that, I can utilize that file. By uploading the file to Xhorse cloud so that my other devices can access it as well.

Key Programming

Immo programming >> Toyota >> Select by type >> Smart key system >> All smart remotes lost >> Generate emergency key >> OK >> OK >> OK >> My data >> Select data file >> Download >> Download here >> Save

Now I can load the file to generate a Subaru key with 78 type.

www.vvdishop.com

How to Fix No Xhorse App in Play Store?

Question: Does anyone know why the Xhorse app is not in the Play store? on Android the app does not appear. Or will they have it to share?

Answer:

Scan the QR code here to link your xhorse account if not find app in the Google play store.

For iOS system, directly search and download xhorse app on Apple google play store or download here,

https://apps.apple.com/us/app/xhorse/id1440550587

Can I Renew BMW PCF7944 Key with VVDI Mini Key Tool

 Need renew bmw keys, chip different, PCF7944, will xhorse vvdi mini key tool do it?

Solution:

This PCF7944 is the 1st generation of this type keys.
7944 can’t renew but can program to car by back door. Pcf7944 keys are cheap also.
This cheap can be fully read out, then its data can be successfully written to cas 2 or cas3
Use proper programmer to adapt to CAS.
But you need to remove CAS.

Program Toyota Auris 2013 All Keys Lost with VVDI Key Tool Plus

 Toyota Auris 2013 all keys lost is done by xhorse vvdi key tool plus and 8A non-smart key AKL adapter.

Auris 2013 it’s 8A H key. None smart, no G key.

Profile was va2. Cut on xhorse dolphin xp005 machine. Got keycode from toyota, you also have the keycode on the car papers.

Ignition coil read as 4d. I tried all tools like zedfull, Im608, londor to do smart box reset nothing worked.
When choose G chip 72 system i got a connection but it was stuck on communicating… When trying to do Smartbox reset.
Then I took xhorse 8A AKL adapter but Auris schema was nowhere described, found an ign2 relay took it out and connected battery and ignition coil. I took out the ign2 relay and but j3 in it I could find a schema nowhere.

I did not select smart key and it was not g key.
I got a successful read and was able to program vvdi super chip.
Car started.

FYI:

TOYOTA AURIS
2010-2012
Transponder Texas Crypto DST 80-bit / DST80 / Toyota G-chip;
OEM Key: 89070-02570 and others.
TOYOTA AURIS
2013+
Transponder Texas Crypto DST AES 128-bit / 4D74, ID74 ~ 4D75, ID75 / Toyota H-chip;
OEM Key: B7EQ 89904-0D130 and others.

VVDI Key Tool Plus Program Benz W203 BE Key via IR

 How to use Xhorse VVDI Key Tool Plus Pad to program a new BE key for Mercedes Benz W203 via IR? Follow the steps below to learn.

Step1. Read Password

Immo programming >> Europe >> Benz >> Select from system >> EIS Tools >> Start programming >> W203, 463, 639(K) >> Read the lock(EIS) data >> IR

Insert IR Adapter to car. Take out and insert again if already inserted.

The password of the lock is detected.

Press “Yes” to save data file.

Password read by infrared?

1. W209/211(CPU HC12), R171 and W203/215/220/230(CPU HC08) EIS support infrared reading of password.
2. This function supports adding and lose all.
3. This function does not required points or online calculation.
4. It takes about 1-4 minutes to read the password directly through infrared.
5. If the final reading fails, please use other methods to obtain the password.

Press “Yes”.

Reading password via IR…

Password has been successfully read out.

Save password file.

Step2. Read & Write Key File

Prepare key file >> Start programming >> Prepare key file

Click “OK” to load the EIS file with password(support Motorola EEPROM data).

Please confirm the key password.

OK >> v051

Calculating requires 30s…

Save key file.

Preparing 8 keys…

Key file generation completed.

Read write key >> Read/write key via IR >> Start programming >> Write BE key >> Load key file

Please insert the new VVDI BE Key into the infrared antenna of Key Tool Plus.

Writing data success.

If key is smart key(BE), please install battery and wait 1 minute before learn key to car(The key LCD will flash during this time)!

 Step3. Activate & Test

The activation key generally directly inserted into the car to active, if you cannot activate, please try the following methods:

1. Manual activation by select from: System-> Read write key-> Read/write key via IR-> Activate
2. Read EIS data again and generate key file again.
3. Try to unplug the OBD connector, insert the BE key into EIS to activate.

The BE key can work after activation.

Done.

www.vvdishop.com