Can Xhorse VVDI2 Read BMW MSD80 ISN from DME?

 Can xhorse vvdi2 read ISN from a BMW MSD80 DME?  This is a frequently asked question by users.

Yes, it can.

Here’s the guide on reading MSD80 ISN with vvdi2.

Check msd80 vvdi2 wiring diagram

set up bench connection with vvdi2 and ecu, provide 13.5V power supply

Let’s go to BMW
Go to Key Learn function- ECU/CAS ISN-MSD80
Read ECU ISN

if you don’t want to mess with bmw, you gonna wait patiently

vvdi2 bmw reads the engine ISN and VIN, read full flashing completed.

Save data.

Change MSD80 VIN requires complete flashing. If vvdi2 will read complete flashing, it can change the vin.

https://www.vvdishop.com/service/read-bmw-msd80-isn-with-xhorse-vvdi2.html

Xhorse Toyota XM38 Smart Key Calculate Failed?

 Question:

I try to generate Toyota Camry 8A proximity (P4 A9) with the new Xhorse XM38 smart key and key tool max. It failed me. Anyone can help me with the calculation failed error code 9B?

Solution:

The error means your XM38 proximity cannot match your device version.

You properly got the Chinese version XM38 key but your device is the Global version.

Do choose the global version XM38 smart key (English) here

https://www.vvdishop.com/wholesale/xhorse-xsto01en-toyota-xm38-smart-key.html

How to do Manual Cutting with Xhorse Condor II?

 Manual cutting is a special function of Xhorse Condor XC-Mini Plus II, which enable users to modify & shape key blanks. Does this ever happen to you? You need to duplicate a key, but all the key blanks at hand are too thick or too wide. At this time, you can use the xhorse Key Cutting Machine to cut key blank thin or narrow key blank.

How to Use Manual Cutting?

Check video:

https://www.youtube.com/watch?v=hKbUPgPGLnI

Condor Mini Plus path:

Manual cutting >> Normal modes/ Line mode

Normal Mode

In normal mode, the cutter will start to work automatically if you press “Start spindle”. by pressing X/Y/X button, you can move the cutter to modify key blank. So you may need to mark the key blank as needed early.

On the left side of screen, you can adjust how fast the cutter moves and its single step distance.

 

2. Line Mode

Line mode differs normal mode in points recording and automatic cutting. Based on the shape of the original key, you can mark the key blank first and record the points. Then Xhorse Condor II would cut the key automatically in accordance with the points recorded.

Under this mode, you can not only thin or narrow key blank, but also modify key blank into different shapes(mostly modify the key tip).

Refer to the post for detailed procedure:

Xhorse Condor XC-Mini Plus II Duplicate Honda Civic Pretty Thin Key

http://blog.vvdishop.com/xhorse-condor-xc-mini-plus-ii-duplicate-honda-civic-pretty-thin-key/

How to Add Jeep Patriot 2014 Key with Xhorse Mini OBD Tool

2014 jeep patriot spare key key programming with xhorse vvdi key tool max and obd mini tool adapter. The procedure can be applied to patriot 2007 to 2017.  Xhorse mini obd app can be controlled by mobile phone directly as well.

Insert mini obd tool with vehicle via OBD socket

In Xhorse Mini OBD Tool App, go to IMMO Programming- Jeep- Select from model- North American-Patriot- 2007 to 2017- Regular key

Select Read PIN Code function
Turn on ignition switch

Read 4-digit pin success
select program a new key
insert key want to program turn on ignition switch

input pin to continue

add a new key by vvdi mini obd tool successfully.

If failed to add key, check bluetooth connection between mini obd and try again.

www.vvdishop.com

Xhorse Super Chip Cloneable and Uncloneable Chip List

As titled, here shows what transponder chip can be or cannot be cloned with xhorse vvdi super chip xt27 using vvdi key tool max cloner.

Super chip vs Generic chip

Super chip: You can generate many types of chips for different keys.

Generic chip: already comes generated, come present to a specific ID or chip number for a specific vehicle, cannot use this chip to clone or generate

An experienced locksmith test couple of keys here. We can clone some keys that you need a sniff that means you got to go ahead and sniff data with antenna through the ignition
lock cylinder and you will collect data so you are able to clone using the super chip.
you can only use the super chip to clone and generate you cannot use any other type of generic chip. It has to be super chip to generate and clone onto this.

1st key:

it is a key for a BMW ID44
go to transponder clone and it is read pcf7935
it does not say id44
it says unclonable so that means that you can not clone it

2nd key
it is a Ford key id128bit
these are the new chips for the 40
as you can see it says unlocked and you can not clone it either
go back to generate, it give us ford id49 option to generate

3rd key

VW or Audi key with hu66 blade with an id48 Megamos
as you can see it says unlocked and clonable
clone online only, must sniff data
we are going to start clone
put the key into the coil
it takes a minute or two
one you can go ahead and out another super chip in there
you can clone your original key and use a xhorse super chip as a substitute that you will not waste you original key

4th key
it is a Honda double side simple key
the older keys transoinder 13 meganos
It says cloneable
press Clone to start clone
when you have a key present you can clone key
then check if it is clone successfully
after you clone it you don’t have to program this chip
you just put it into the new shell and you cut it and it turns on
if no key is present you will have to generate super chip and program

5th key
it is a Mazda ID63 key
mostly all 4D chips are cloneable
press clone to start cloning
put the original key into the coil
then put a super chip to clone
the key is already programmed and you don’t have to go into the car and connect your programmer
it is ready to start the vehicle

when you sue the super chip a lot and you have generated into types of chips
you can reset it or when you are cloning you have to reset it

6th key
this is a Nissan key 4D60 from an older Nissan vehicle
read it as 4d60 and it is cloneable
pout original key into the key tool max
start clone

7th key

it is a Toyota
you can generate any Toyota key with 4D60

most this key has a dot
you can see it is now cloneable

8th key
it is a Toyota G chip Toy44 key
this key has g etched on the key blade
it is cloneable
anything you now as 8a transponder you can clone ok with super chip

9th key
it is a Honda G chip key id47

cannot clone or generate Honda G chip 47
(Only generate with wireless remote NXP chip)

10th key
this is a Chevy 46 chip for newer Silverado models and gmc models
it is id46 and cloneable
2 ways of adding a key
clone his existing key or generate super chip and program it to the vehicle
if you on your last generic key you can clone and use super chip instead
to the vehicle that way you save your last key

11th key
this is a Nissan 46 key
it is locked and tells you to sniff data but it is unlocked
you can go ahead and clone it easily.

After cloning car will start. No program is necessary.

all keys lost must generate super chip and program to the vehicle on board 30 minutes procedure.

12th key
the last key is a 4C or Texas 4C
this one is cloneable wen can press clone to start clone.

keep updating.

www.vvdishop.com