How to Fix Xhorse Condor II Breaks Cutter Screen Dark

 Problem:

One customer gave feedback that Xhorse Condor XC MINI Plus II screen turned dark during operation. And He has broken lots of cutters when cutting, When it stops then movement on cutter stops while it moves it breaks cutter and have to change the cutter.

Possible Reasons:

1.Hard key blank and incorrect cutter setting (broken cutter)

2.Damaged driver board (dark screen)

Solution:

1.Set “Spindle Speed” as “High”, and set “Movement Speed” as “Low”.

2.Replace driver board.

Tips to Check Car Mileage in VVDI Key Tool Max

 Here’s a small tip to guide you quickly check vehicle mileage on Xhorse VVDI Key Tool Max Pro/ VVDI Key Tool Max programmer. You’ll need to have a working key at hand.

Put the working key into Key Tool Max slot.

Transponder clone >> Read transponder

Here to check key information including key type, specific chip, key ID, key status, cloneable or not, encrypte mode, code mode, brand, chip type, programming status, frequency, kilometers(KM) and key number.

Slide down the screen to find KM, It shows 612754km.

That’s the vehicle mileage.

* It should be noted that the function does not apply to all cars.

How to Cut Ducati multistrada 1200 Key with Xhorse Dolphin XP005L?

 How to: cut, copy and cloning Ducati multistrada 1200 year 2014 4D motorcycle key with xhorse combo.

Device used:

Xhorse key reader

Xhorse Dolphin XP005L Dolphin II

VVDI Key Tool plus (or key tool max/key tool max pro)

How this Xhorse combo works, making a Ducati key?

Decode key bitting with key reader

Cut key with dolphin 2

Image attached:

After cut key, start cloning.

Go to Transponder cloning function. Identify key chip type: ID40

Then clone transponder key with key tool plus.

www.vvdishop.com

Xhorse VVDI Prog Read Mercedes W220 1d69j

Mercedes W220 1d69j, how to read with xhorse vvdi prog?

In-circuit reading not available for 1D69J. Remove and read with HC05 adaptor.

HC05 adapter

Need desolder mcu from board and use HC05 adaptor.

Read with prog under mcu-Motorola -mc68hc05x32(1d69j)

Or with vvdi mb it will work. No need to remove EIS.

VVDI MB BGA tool supports this EIS program all key lost without opening EIS. it can do it on bench.
Read password via IR with VVDIMB tool on bench.

Xhorse VVDI Prog V5.2.9 Update Feature

Xhorse VVDI Prog software update to V5.2.9 on July 4th, 2023.

v5.2.9 (2023-07-04)
* This version DON’t need update
firmware
* Modify GL8 BCM(2017–)-READ,
GL8 BCM(2017–)-WRITE,
options in
<5-DASHBOARD>-><VOLKSWAGEN>:
Optimize the process
* Modify HOWO A7,
HOWO SITRAK 2083,
HOWO T5,
HOWO T5H,
HOWO T7H,
HOWO TX,
Sino Trunk2083,
SITRAK 6011,
SITRAK 6021,
SITRAK C5H SQUARE REMOTE,
SITRAK C7H,
SITRAK C7H B5,
SITRAK RHOMBUS REMOTE,
SITRAK T7H
options in
<8-OTHER>-><Sino Trunk>:
Optimize the process
+ Add XINGMA 315
option in
<8-OTHER>-><CAMC>
+ Add QILIN VH
option in
<8-OTHER>-><FAW>
+ Add SITRAK C7H 540
option in
<8-OTHER>-><Sino Trunk>

Free download vvdi prog software 5.2.9

https://we.tl/t-dpCclQ2zYo