VVDI Key Tool Plus Add Key Benz E320 W211

 Mercedes Benz E320 2009 W211: Xhorse VVDI Key Tool Plus added a new 2 button aftermarket BE key, position #6, disabled #1 lost key. All done in 20 minutes. The calculation took only about 5 minutes! Cost 1 free token. Great job Xhorse!

The customer wanted 1 new key with 2 buttons. He’s lost the #1 key. The #2 key is still in his possesion. But he isn’t sure whether the #1 key is just somewhere hidden in the household. So I decided to disable #1 key to be able to enable it if the key should appear somehow somehere. And just added the new spare key to the system. All keys lost would be an unnecessary waste of 2 tokens instead of 1. And a risk.

Possible to Generate GM 4A Key with VVDI Super Chip

 Question:

Can I generate a chip control for a 2016 Chevrolet Beat with xhorse vvdi key tool max and vvdi super chip? Is a 4A chip.

Answer:

Yes you can generate GM 4A chip with super chip, but need super chip XT27B not XT27A.

You can do 4A with Xhorse B5 Super XT27B Universal Remote Key 3 Button – XEB510EN.

Xhorse Multi Remaining Time is 0 Error Solution

 Problem:

Xhorse Multi Prog failed to read a Kia MEG17.9.12 ECU.

Error “Failed to load S0. Error code ffff55aa, the number of times used is 0.”

Any idea?

Solution:

Just as multi prog software said, sync device and try again.

Go to Update Online tab-> Authorization management and sync device.

How to Bind Xhorse VVDI MLB Tool with Xhorse App

 Where to download Xhorse VVDI MLB Tool software?

VVDISHOP.COM here provides software download free link on mega

VVDI MLB Tool software free download

Current software version: 1.0.3.0

Language: English, Chinese

Update: update online (check Update Online tab)

Operating system: Windows 10, Windows 11

NOTE: You need to bind MLB Tool with Xhorse App to perform immo data online calculation.

Go to Special Function->Bind device, scan QR code to bind device with xhorse app.

There are 3 steps to calculate MLB immo data with the VVDI MLB Tool:

1.Identify key

Place the key in the device identification area for identification.

2.Collect key data

Open the original MLB key, connect the original car key PCB as shown in the diagram, click Collect Key data button after connection. The server takes approximately 10 seconds to calculate.

Save the calculation data when it completed.

3.Make dealer key 

Load the saved data above and generate dealer keys.

Then use VVDI2 and VVDI Key Tool Plus to learn key.

VVDI MLB Tool MLB Wiring Diagram Type 1 to Type 6

No need to remove chip. But need to remove two capacitors (100nF) and solder cable to original key according to different color as diagram.

Type 1 Audi/Lamborghini

Type 2: Audi Lamborghini

Type 3: Audi Bentley

Type 4 Porsche

Type 5 Porsche

Type 6 VW

How to Cut Dimple Keys with Xhorse Condor XC-002 Pro

 The upgraded version Xhorse Condor XC-002 Pro manual key cutting will duplicate dimple, double sided, single sided, 4 track external, 2 track external, 4 track internal, channel track keys. Here we will show how to cut a dimple key with condor xc-002 pro.

1. Insert the internal dimple probe and cutters

2. Insert the original key and the blank key using a shim

3. Rotate the knob to standard mode

4. Calibration. Follow the direction of the light until the middle light turns green

Make sure the clamp is in the corresponding position.

Turn on the cutter switch.

5. Duplicate the key
Press down the main handle to duplicate the key.

Turn off the switch after finishing one side cutting.
Clip the key and continue to cut the other side.

After finishing cutting the other side, turn off the switch and clean up.

6. Insert the dimple probe and cutter (external) to Xhorse Condor XC 002 pro.

Replace the internal dimple probe and cutter with external ones.

7. Switch the konb to dimple mode

8. Insert the keys
9. Finish the calibration.
Clamp the keys and finish calibration.

10. Duplicate the key
Turn on the cutter switch to cut key.
After finishing one side, turn off the switch.

Clip the key and continue to cut the other side.

After finishing cutting the other side, turn off the switch and clean up.

Now we have a working dimple key.

www.vvdishop.com