How to Cut Mini Cooper HU92R Key with Xhorse Dolphin XP005L?

 Today I’m gonna cut a 2004 Mini Cooper HU92R mechanical key with Xhorse Dolphin II by bitting. Before that, you should get the bitting codes. Since I’ve used LISHI HU92 to decode the lock, let’s go straightly to cut the key.

Cut by bitting >> HU92R >> 820*4100 8 bitting, cut depth 1.25mm >> OK

Follow the prompt to install key blank.

Tip align 2nd position on M5 clamp side B.

Input bitting codes on screen: 3122 3443

Cut key >> Cut

The Dolphin 2 machine will start to cut automatically…

Just wait until it finished.
Then flip over to cut the other side.

Take out the key when key cutting was completed.

It can work perfectly.

Real quick and easy job.

www.vvdishop.com

Xhorse VVDI2 Program 2007 VW Passat B6 ID48 All Keys Lost

 How to program 2007 VW Passat with Comfort module 95320 all keys lost using Xhorse VVDI Mini Prog and VVDI2.

Model: 2007 VW Passat B5
Transponder: Megamos ID48
EEPROM chip 95320

1- Read EEprom in Circuit using VVDI Mini Prog (1 shot straight in the head),

Remove comfort module, read eeprom 95320 with Mini Prog or VVDI Prog.

2- Decrypted EEprom with VVDI2

In VVDI2, select Immo dump tool, select Europe->Passat->Comfort ID48-95320
Upload eeprom data read by mini prog.
VVDI2 will extract pin code.

Read EEPROM out of circuit,  found 7th Byte

Go to Passat B6/CC 4th Immobilizer system
Find 7th bytes CS code from ECU dump file
Decrypt 95320 dump to get 7th bytes
Then you can make dealer key with CS and PIN.

made 2 dealer key
1- overwrote key#3 with ID48 from smart key
2- Overwrote key #2 using XT27A Superchip.

PIN & CS Codes both available

only thing missing is
1- Key learning in the car
as well as
2- Remote learning in the car

www.vvdishop.com

Xhorse VVDI BMW Tool BMW Coding Speical Functions

 There are some speical functions of Xhorse VVDI BIMTool pro under Fxx/Gxx Program/Code menu. Here comes the explanation of these special functions.

Function Introduction:

1. Switch ON/OFF transport mode: if in transport mode car not start, you can usethis function

2. Reset FEM to start: change module, if after change configuration data can‟tstart car because motor, you can use this function

3. Emergency switch ON: When all key lost or the ELV is off, the FEM/BDC/CAS4system can be programmed after turning on the ignition switch ON

4. Update gateway InstallECUlist: Update gateway Install ECU list

5. Reset FlexRay: Reset FlexRay will reset the internal FlexRay of the gateway.

Attention: Before this operation, you need to write the gateway control unit list first and reset FlexRay then reinitialize FlexRay

6. Initialize FlexRay: Initializing FlexRay will reset the internal FlexRay of the gateway. Before performing this function, make sure that all modules have been installed on car and communicate normally! After initializing FlexRay, if error codeof the vehicle appears, power off the vehicle for ten minutes it will work

7. Update MSM: MSM contains the SVT file information of all modules. Generally,this operation does not need to be performed. To perform this operation, you need to load the SVT file containing all the control unit information. The SVT file will besaved on the computer by default when the vehicle information is read.

The defaultsave path: My Computer>Documents>BMWTOOL>CARINFO_BACK>The VIN named folder

8. Reset ELV: This function is used to replace the FEM/BDC, and the ignitionswitch can be turned on after resetting the ELV

9. FSC Tool: Update the navigation file information.

Calculate activate code: NBT host uses DE type FSC file to calculate activate code, CIC host uses 1B type FSC file to calculate activate code

Read: read “VIN”, “Base Variant”Read FSC information: read license information

Backup FSC file: backup license information

Write FSC file: write license information

Uninstall license: Uninstall unnecessary license

Delete license: delete unnecessary license

Restart unit: Restart the navigation control unit module

10. VCM Tool: Mainly for read, write and backup VCM data

Main function introduction: Read VCM data from the gateway, including the FA configuration informationof the vehicle. For example: when a module containing FA information needs to be programmed separately on the bench, and the configuration information of the bench is different with the module, you can read the backup VCM information fromother module of the original vehicle that has not lost information, and then write theinformation into the module. Other modules, such as instrumentation, FEM, foot space module. When the programming coding information of some modules of the vehicle is lost, you can get all the information from here, and loading this information can restore the programming and coding information of the lost module

11. Initialize Airbag: It needs to use this function after repairing or replacing the airbag, otherwise the airbag will be abnormal

12. Reset EKPS production mode: Generally, after replacing the EKSP control unit need Reset EKPS Produce mode

13. Customer request: Send the code to the car, check the model information, and judge the problem through the vehicle’s feedback. For example: send the message 22F190,you can get the VIN

www.vvdishop.com

How to Add Audi Q7 2017 MLB Key with Xhorse VVDI MLB Tool

 Here we will show how to add a spare MLB on an Audi Q7 2017 using Xhorse VVDI Key Tool Plus and VVDI MLB Tool.

Procedure:

Connect VVDI MLB Tool with key tool plus via OTG converter.
Go to Immo programming->Audi->Select by type->MLB immobilizer systems

The function requires network connection
Place the original MLB key in the MLB tool identification area.

Step 1: Identify key
Sekect 1-Identify key information

This is the new MLB key, it is unlocked.

Step 2: Check the wiring diagram
Let’s remove the key board of the original MLB key.

Check wiring diagram Type 1 for Audi
Check if the wiring diagram is the same as your key board. It is the same as type 2 pinout.

Solder cable to original MLB key board according to different colors as wiring diagram
Need to remove 2 capacitors.
Then connect key board with MLB Tool.

Step 3: Collect Key data
Select 3-Collect key data
If use original key the calculation will deduct 200 remote points.
Calculation successfully.

Step 4: Generate dealer key
Select 4-Make dealer key.
Insert the new key into the key identification area of the VVDI MLB Tool.

Make dealer key successfully.

Resolder and install original key shell.

Step 5: Learn Key
Select 5-Learn key
Turn off the air conditioning and open the engine compartment cover before programming the key.
Inout number of keys to be learned: 2
Put 1st key close to the ignition
Load immo data to learn key
Learn 1st key
Put 2nd key close to the ignition
Learn 2nd key successfully.

Test both keys. All working fine.

www.vvdishop.com

http://blog.vvdishop.com/xhorse-vvdi-key-tool-plus-adds-audi-q7-2017-mlb-key/

Xhorse Multi Prog Read Mercedes EDC17CP01 on Bench

 Xhorse Multi Prog programmer read Mercedes Benz Bosch EDC17CP01 ECU on bench successfully.

Quick search EDC17CP01 and check wiring diagram.

Connect multi prog with ECU follow the pinout

Read INT EEPROM and save.

Multi-prog read INT eeprom in 1min 24s.

Read INT flash and save.

Reading flash takes longer in 3min 12s.

www.vvdishop.com