Xhorse VVDI Prog Pinout to VW MQB ELV V850 70F3624

 Here comes the VW TIGUAN ELV MQB Pinout to Xhorse VVDI Prog programmer.

MCU Renesas V850 70F3624.

Read all data from ELV with VVDIprog, its easy.

Images attached:

VVDI BE Key Pro Benz W221 KeylessGo Not Working Solution

 Problem:

I’ve made keys for a few w221 s-classes and x166 gl, they all had original keys and keyless go function but the new keys don’t work with keyless go.
I’m using Xhorse VVDI BE Key Pro XNBZ01EN and programming with im508s.
Any solution to this?

Solution:

The VVDI BE Key Pro (XNBZ01EN) keys work for starting but not for Keyless Go on W221 & X166.

The key you are using is not keyless go you need FBS3 keyless go just as this picture here.

After getting the smart box key it as procedure you need to write the file first before putting battery in smart key and the light in the key will flash for some mins change frequency to 314mhz.

For smart key/keyless go you must use this FBS3 smart key.

They have extra big coil on board to catch signals from around antennas and are 3..4x times more expensive as normal dash key.

www.vvdishop.com

Xhorse Mini Prog Read BMW B58 DME ISN Code

How-to tutorial: read BMW B58 DME ISN code with Xhorse Mini Prog and Bosch ECU adapter XDNP30.

B58=MG1CS003.

You can read MG1CS003, EDC17C60, Med 1.7.2 ect …
All BMW & Mini Cooper ECU you can read ISN with this tutorial.

This takes no longer than 10 minutes, job is easy. You can perform All Keys Lost situation on any BMW F series en E series or Mini Cooper.

Select Read ECU ISN function-BMW- B58

Mini prog asks to use XNDP30 Bosch ECU adapter.

Check wiring diagram.

Connect DME ECU with Mini Prog via XDNP30 adapter.

Read eeprom.

Read and save eeprom.

It will show ISN code.

www.vvdishop.com

VVDI MLB Tool MQB48 No Result in Server Solution

 Problem:

Had a problem calculating immo data with Xhorse VVDI MLB Tool and MQB48 adapter.

Error: “Failed to query last calculation result. There’s no result in server.” Any idea?

Solution:

Do not check ‘Query last successful reset’ option.

Hit Collect key data to calculate immo data again.

NOTE:

Removing the wrong capacitor can cause the MQB chip to become unrecognizable, making it impossible to collect data.
After reading the data, the capacitor must be restored; otherwise, the key cannot be programmed to car.

Xhorse VVDI PROG Read Hyundai XC2361A-72F Airbag

 Here are the Hyundai Verna airbag modules. As you can see, the second module we have made connection to the Xhorse VVDI PROG. Following we’re gonna read the airbag data for module reset.

Whenever you make the connection, keep in mind that no wire should ever touch the surrounding area. And there’s no need to give 12 volts to read it. It gets read directly.

Open VVDI PROG software to select model.

Type: 2-MCU

Brand: INFINEON-XC2XXXX

Chip: XC2361A-72

To reset aribag module, we have to read the FLASH3 data.

FLASH3 >> Read

In a few seconds, the data will start getting read. It takes about 2-3 minutes to finish…

Reading success.

In this way, you can easily read Honda’s next generation airbag module with VVDI PROG or Multi-Prog. Its part number comes in different ways such as A6000, 6100, 62, 63, 64… There are many different part numbers. However, you can follow the above method.

www.vvdishop.com