VVDI Key Tool Plus Skoda Octavia 2018 MQB all keys lost

 New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools.

Tested VVDI Prog and VVDI key tool plus read MQB dashboard. Both devices have bought the new VAG MQB license. Without you cannot read the data on dashboard.

and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading.

There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min.

email address: [e-mail] 

I done already few with 100% success. Lifting pin not very dangerous.
They answered fast usually I communicate via wechat and there have take time.

Same place need to solder if use key tool plus. But key tool plus does not need 1k oom and no extra 12v as vvdi prog.
2019 build year Skoda Superb akl situation made successfully today.
same dashboard 160€ and they give you all data what need to make key.
Just force ignition on and read over obd information like on picture and send them. That dashboard just cannot read whit vvdiprog yet pay the 160 and get the job done, les then 3min. I get the immobdata and synchronization information and car out.

www.vvdishop.com

How to Generate Toyota RAV4 2020 Smart Key with Xhorse XM38?

 Problem:

Toyota Rav4 2020 USA market 8A 312/314mhz tested 3 listed remotes don’t work on Xhorse xm28 and xm38.
Car accepts only the original key in the procedure.
Original key is batch no: 14FBC in Vvdi mini key tool app software doesn’t find that key. Any idea is welcome.

Solution:

Best option is the OEM key.

Xhorse xm38 works as well. Here is the tip.

Use this one, works great. All Rav4 work with xhorse.
You’ll find it under Lexus, or use the search function.

If the frequency is not the same as this option. You have to adjust the frequency after you program it.

Go to VVDI Remote Function->Smart key customization

Add 2023 Toyota Camry Xhorse Remote by VVDI Key Tool Plus

 I’m already having a FCC key and gonna do add key for this 2023 Toyota Camry. What I would consider the easiest way is using Xhorse VVDI Remotes. As I can program the key no problem without any codes in 4 minutes.

What is required

VVDI Key Tool Plus

XKTO10EN Toyota Wired Remote

VVDI Super Chip XT27A66

Step1. Generate Remote

Plug circuit board into VVDI Key Tool Plus. You can do this with a Mini Key Tool in same way. Be noted to install a battery for it.

Remote program >> Search: HYQ12BGF >> Generate

Step2. Add Remote

Disconnect the circuit board, enter

Immo programming >> Toyota >> Select from model >> Camry >> 2010- >> Remote program(2013-) >> Start programming >> Remote adding

Switch ignition on, open driver door at the same time.

Please complete in 30s, you’ll hear the system beep after done:

Click LOCK & UNLOCK button for 4s, then click LOCK button for 1s.

(If no programmed, click LOCK & UNLOCK for 4s, after releasing click UNLOCK & LOCK meanwhile).

Step3. Transponder Clone

Insert working key into Key Tool Plus coil.

Transponder Clone>> Read Transponder >> Transponder Clone >> Start clone

Take out working key and put a VVDI Super Chip instead.

Transponder copy successfully.

Easy done!

www.vvdishop.com

Xhorse VVDI Prog Read VAG CRD310 Radio NEC and EEPROM

 How to read radio code unlock after reading Nec V850 D70F3358 Processor & 95128 Eeprom with xhorse vvdi prog for VW SKODA AUDI SEAT.

Part Number is 1z0035161f.  To decode this radio, you need two dumps, an eeprom dump and a processor dump. Preferably in BIN format.

Step 1: Read NEC V850 D70703358
Connect Nec V850 D70F3356 processor with vvdi prog via mcu3 adapter.
There is the wiring for Orange. You need to power the radio itself.

Orange5 pinout

VVDI Prog pinout

in vvdi prog wiring, i saw seven wires, in this connection diagram it only has 6 wires, but 6-wire is enough.

In vvdi prog software, select MCU-Renesas V850- D70F3358 and save data

Step 2: Read eeprom 92128

Connect 95128 mcu with vvdi prog via clip adapter.

With clip adapter you don’t need to unsolder the chip from the board.

Select EEPROM-ST-M95128

Read and save eeprom data

Upload NEC and eeprom data to radio code calculator, i.e this one.

Then calculate radio code.

How to Solve Failed to Generate Xhorse Audi 754J Remote

Problem:

I failed to generate Xhorse Audi 754j remote with both vvdi mini key tool and vvdi2. Error authorized remote failed. Any solution.

Solution:

You got the Chinese version 754j remote (see the plastic pack and PCB board). CN version remote cannot be generated by English devices.

Get latest version English remote here

https://www.vvdishop.com/wholesale/xhorse-vvdi-audi-754j-smart-key.html