ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارXhorse VVDI2 Audi A3 All Keys Lost FAQs
Question 1: can you advice why this xhorse vvdi2 tool is not reading Audi A3 cluster Micronas cdc3217g? I know AVDI can read in 2min.
Never the less is it possible to get 7 byte CS from ECU to make dealer key?
Answer: You can get only 6 bytes from ECU. Reading Micronas in-circuit is also possible with a good programmer to get 7 bytes.
Question 2:Thanks mate I know but I do not want to go stripping instrument, can anyone confirm vvdi2 will not read micronas cdc3217g is this hard to answer yes/No
Answer: No…
Question 3:
Can any one confirm if with VAG obd helper able to read cluster Micronas cdc3217g?
Answer :
If you have working key you can take 6bytes from ECU thru obd and the 7th byte from working key.
Make dealer key and program it.
No need to strip anything.
Question 4: Lost keys or add key. Pretty sure i did some ass a add with VVDI. If Lost keys i use Carprog on it
Answer: Lost key mate otherwise I would not have been crying, are you shore Carprog can read? is this by OBD or solder way?
Question 5: Positive about Carprog mate.
Need some sort of “service mode”. Soic clip will do
Answer: Mate forget carprog on this vehicle, been told the chip in Audi A3 instrument cluster micronas cdc3217g have more memories therefore you have to read by solder connection or you can get a key from dealer and learn by obd tool.
Final Solution:
vvdi2 do it this car AKL
tested work 100%
read abs coding,take out dash read eeprom
make service mode ,write eeprom,put back to car,read immo data,save
and you have pin and cs.turn off ignition and write back orginal eeprom from obd
make dealer key and learning
all ok
tested 100%
car audi a3 2010 year engine 1,6d pcr2,1
VVDI2 works fine on Audi Micronas. For AKL you have to open dash. Without key it is impossible to enter bootloader mode. There is no tool that will get data from dash via OBD in AKL situation.
VAG OBD helper or pull the dash. No big deal.
How to combine Xhorse tools in new Xhorse App?
Xhorse launched new Xhorse app for VVDI Mini Key Tool ,VVDI Key Tool, Condor Dolphin, VVDI2 and VVDI MB tools.
1)
How to Combine VVDI Mini Key Tool/Condor Dolphin/VVDI Key Tool in Xhorse App?
Login Xhorse APP, connect device by Bluetooth, enter ‘Device & History’ to combine.
Run upgrade kit, device connect to PC by USB cable
Read device, select’Binding’, customer will get QR code automatically,
Login Xhorse APP, enter ‘Account’–‘Combine device’,
Then scan the QR code to combine to account.
Read device, select’Binding’, customer will get QR code automatically,
Login Xhorse APP, enter ‘Account’–‘Combine device’,
Then scan the QR code to combine to account.
VVDI super chip released in VVDI2 V6.5.0
Xhorse VVDI2 BMW VAG PSA key programmer software update to V6.5.0 on April 23th, 2019.
VVDI2 Version: 6.5.0
*** 2019-04-23
*** Require firmware V6.5.0
************************************************** **********************
*** Require firmware V6.5.0
************************************************** **********************
!!! VVDI super chip is released, require V6.5.0 software !!!
New:
===== VAG V6.5.0 =====
1. Improvement for Audi A6/Q7(IMM4) adapt Gearbox
2. Bugfix for MQB35xx write immo data
3. Improvement for autodetect VAG immobilizer system
4. Bugfix
New:
===== VAG V6.5.0 =====
1. Improvement for Audi A6/Q7(IMM4) adapt Gearbox
2. Bugfix for MQB35xx write immo data
3. Improvement for autodetect VAG immobilizer system
4. Bugfix
===== BMW V6.5.0 =====
1. Improvement for FEM/BDC key learning
2. ECU/CAS ISN: Support load and decode B38/B48 ISN with EEPROM dump
3. KM repair: Support ALL eeprom read by VVDIProg M35080, 35160, 35128
4. Bugfix
1. Improvement for FEM/BDC key learning
2. ECU/CAS ISN: Support load and decode B38/B48 ISN with EEPROM dump
3. KM repair: Support ALL eeprom read by VVDIProg M35080, 35160, 35128
4. Bugfix
===== Porsche V6.5.0 =====
1. Bugfix
1. Bugfix
===== PSA V6.5.0 =====
1. Bugfix
1. Bugfix
===== Transponder Programmer V6.5.0 =====
1. Support VVDI super chip, you can change to any type in the list:
11, 12, 13, PCF7935, PCF7936, PCF7937, PCF7938, PCF7939, PCF7946, 48, 4C, 4D, 4D(80), 4E, 8A, 8C, 8E
2. Special transponder: Supprt use VVDI super transponder, it can use reusable, never lock
3. Copy transponder: Support clone 4D transponder
4. Copy transponder: Support clone 4E transponder
5. Copy transponder: Support clone Ford ID83, Kiv ID70
6. Copy transponder: Support clone Toyota H transponder – Require use VVDI super chip
7. Copy transponder: Support clone 8C/4C transponder – Require use VVDI super chip
8. Immobilizer data tool: Euro->Renault->Duster->2010- 95040
9. Immobilizer data tool: Euro->Chevrolet->Silverado->2011 9S08
10. Immobilizer data tool: Asia->Toyota->Corolla->2004 93C66(ID4C)
11. Immobilizer data tool: Asia->SAIC->Roewe 360 95160
12. Bugfix for electronic monitor key
13. Bugfix
1. Support VVDI super chip, you can change to any type in the list:
11, 12, 13, PCF7935, PCF7936, PCF7937, PCF7938, PCF7939, PCF7946, 48, 4C, 4D, 4D(80), 4E, 8A, 8C, 8E
2. Special transponder: Supprt use VVDI super transponder, it can use reusable, never lock
3. Copy transponder: Support clone 4D transponder
4. Copy transponder: Support clone 4E transponder
5. Copy transponder: Support clone Ford ID83, Kiv ID70
6. Copy transponder: Support clone Toyota H transponder – Require use VVDI super chip
7. Copy transponder: Support clone 8C/4C transponder – Require use VVDI super chip
8. Immobilizer data tool: Euro->Renault->Duster->2010- 95040
9. Immobilizer data tool: Euro->Chevrolet->Silverado->2011 9S08
10. Immobilizer data tool: Asia->Toyota->Corolla->2004 93C66(ID4C)
11. Immobilizer data tool: Asia->SAIC->Roewe 360 95160
12. Bugfix for electronic monitor key
13. Bugfix
===== Copy 48 (96 bits) V6.5.0 =====
1. Bugfix
1. Bugfix
===== J2534 V6.5.0 =====
1. Bugfix
1. Bugfix
===== Online Upate Tool V6.5.0 =====
1. Bugfix
1. Bugfix
===== Quick Start V6.5.0 =====
1. Bugfix
1. Bugfix
VVDI Free Toyota H Transponder Function Activation
Good news!!! Xhorse rolls out 2019 Easter Promotion. Buy VVDI Mini Key Tool, you’ll get
1.Free ID48 96bit Transponder cloning activation
2.1 Year token for ID48 96bit Transponder Copy (1 token each day)
3.Free Toyota H transponder function
Note:
Toyota H transponder Activation Authorization is free to VVDI2 and VVDI Key Tool as well.
(Note: Everytime you do Toyota H chip function, VVDI2/KeyTool will take away 200 points. 200 points= 1 token. You can exchange token to points within upgrade kit.
You can obtain points by using VVDI remote keys as well. )
You can obtain points by using VVDI remote keys as well. )
Now you enjoy free points for 2 months.
Valid: 01/07/2019
After 2 months,
With Xhorse Super chip, free points all the time
Without super chip, take away 200 points each time.
Related post:
http://www.vvdishop.com/info/vvdi-mini-key-tool-with-free-id48-96bit-transponder-copy-and-1-year-token-21272.html
VVDI2 BMW Cannot program G-series BDC key
Question:
2016 7-Series (BDC system) trying to backup coding by obd using Xhorse VVDI2 BMW and never saw that screen any suggestions?
Error:
“Please use BMW E-sys software to read/restore coding!!!
Coding1: Unknown version- SWFL:00005FA8, BDFL:000064F8
Coding1: Unknown version- SWFL:00005FA8, BDFL:000064F8
unknown G012 type”
Cause & Solution:
G-Series BDC is not supported with any tool at the moment.
What it means is that you will require another tool to carry out coding. Bmw e-sys dealer kit is an example. Maybe vvdi bmw will be able to help soon.