ODIS V23 Works Ok with Xhorse MVCI Pro

 Xhorse MVCI Pro J2534 was tested working with VW Audi Skoda Seat ODIS-S service software V23 and ODIS-E Engineer software V17.

Software version: ODIS-S V23.0.1/ ODIS-E V17.01

License: Included License Standalone and License for all brand

Compatible device: Xhorse MVCI Pro (and other passthru devices VXDIAG VCX SE 6154, openport 2, vnci 6154a, godiag j2534 etc)

Operating system: Win10 or later O/S, RAM>4G. Win7 is not supported since this version.

Language: Multi-language

Both software can be downloaded for free. But not include keygen.

If need activation, contact

Skype:VVDIfactory.com
Email:[e-mail]
WHATSAPP:+86?13559259147

We will send software in U disk format which contains 1 time free activation for both ODIS-S and ODIS-E software.

Tested models by far:

Model	VIN	ECU Type	Protocol	ODIS S 11	ODIS S 23.0.1	ODIS E 17.01
2007 AUDI A6	LFV3A24F273054910	MED9.1	KWP2000	√	√	√
2005 VWCaddy	LFVBC32K053000112	EDC16U1	KWP2000	√	√	√
2007 VW Passat	WVWVU73CX7E001193		CAN BUS	√	√	√
2017 VW Passat	LFV3A23C5H3071340	SIMOS 18.3	CAN BUS	√	√	√
2008 Audi A6	WAUDH74F98N068455	SIMOS 6.22A	CAN BUS	√	√	√
2008 VW Passat	LFV3A23C583003748	MED17.5	CAN BUS	√	MVCI Pro supports full system diagnostics (other J2534 only OBD scan)	√
2008 AUDI A6	LFV5A24F783014364	SIMOS 8.10	CAN BUS	X	X	√

Steps to Install ODIS-S/ODIS-E

1.Install Setup

2.Activate software

3. Install PostSetup

4. Install driver

5. Run software

MVCI Pro J2534 driver is included in the U disk.

www.vvdishop.com

How to Calibrate VW Vento Polo NEC24C32 KM by VVDI Key Tool Plus

 Xhorse VVDI Key Tool Plus is able to repair VW Vento/ Polo NEC24C32 mileage by KM recalibration function without connecting to ECU. Following I’m gonna show how to do. The original mileage is 6532km on dashboard.

Connect Key Tool Plus, instrument panel & smart CAN solution tool all together.

1. Back Up EEPROM

IMMO programming >> European >> VW >> 4th immo system – Volkswagen/ Skoda/ Seat >> Instrument with NEC+24C32 >> Start programming >> Read instrument information

Here to check VAG number, HW/SW version and VIN on Key Tool Plus.

It’s better to backup immo data firstly before doing mileage correct.

Read immo data >> Login Method 2

*If the ignition key is inserted or when use the all-key-lost mode, there is the prompt to insert the ignition key, then you can select “Login Method 2” to try.

Here to check all immobilizer information, including 3 keys.

Press OK.

Whether to save the data? OK

2. Repair Kilometer

KM Repair >> Yes >> Yes

Warning: KM recalibration only use for repair car KM after exchange new dashboard!

You can not use the function for other purpose, the user should take all risk if use in illeagal purpose.

Input new KM: 65330

Press OK to confirm.

As we can see, the mileage on dashboard has been changed to 6533km.

Reset success.

www.vvdishop.com

How to Solve Xhorse Dolphin XP005L Bluetooth Disconnects

 Problem:

I connect my Xhorse Dolphin XP005L to a phone via Bluetooth, it keeps disconnecting by itself. after that i connect back then it immediately disconnects. Firmware and database are up to date.

I also use the machine with key tool plus. he has disconnected with it a total of 1 time so far. it is much rarer there. Any solution?

Solution:

Update firmware and database to latest version, then connect with Xhorse App.

If all versions are up to date, but Bluetooth still constantly disconnecting, the problem would be the WiFi module on the mainboard.

Contact us to verify if the WiFi module need to be replaced. We will send you WiFi module for replacement.

Remove the screen and replace WiFi module (on the same control board)

https://www.vvdishop.com/service/replace-xhorse-dolphin-xp005l-screen.html

How to Replace Battery in Xhorse Condor Motherboard

 Problem:

My Xhorse Condor xc-mini plus machine doesn’t record but time and date, would it have a battery inside or something? I’ve already dismantled where it gave here and I haven’t found it?

Solution:

Replace the button battery (CR1220) on the motherboard.

Procedure:

Step 1. Remove screws on the screen and the back cover, and take them away.

Step 2. The motherboard on the left is tightened by 3 hexagon screws, which requires an extended handle or a long-handled hexagon wrench to take it out.

Step 3. When you take out the motherboard, you’ll see the button battery (CR1220).

Step 4. Replace the battery and restore everything.

Step 5. Turn on the machine, adjust the time setting, and everything should be fine.

BTW, such procedures (that require taking the machine apart) Under Our Guidance won’t affect its warranty.

https://www.vvdishop.com/service/xhorse-condor-xc-mini-plus-display-wrong-time-solution.html

How to Generate ID13 Transponder via VVDI Super Chip

 Problem:

Programming a Honda ID13 transponder key with xhorse vvdi key tool max and this message came up. Does anyone know how to get the information for “search header info” ? Thank you

Solution:

After you generate the chip is empty without ID.

Go to special funtions >set type of vvdi super chip>set as id13 >settings.

Or use cloning function.

www.vvdishop.com