Read & Write Volvo CEM TB28F400 with Xhorse Multi Prog

 In my previous test, Xhorse VVDI PROG does not work with Volvo CEM TB28F400 microcircuits . It can erase them but cannot write. Now I’ve already have the next generation Xhorse Multi-Prog Programmer respectively. And the XDMPO4GL VH24 SOP44 Adapter was purchased specifically for these microcircuits.

With the TB28F400 B5B microcircuit was installed, now let’s see a clear difference between the Multi-Prog Programmer& VVDI PROG.

Open MultiProgsoftware,

Click “Read”.

Read success.

In the Device settings, I can select “Verify after reading”. It’s very useful option I strongly recommend it.

Open the prepared file.

Click “Write”.

Let’s see if it will be successful, just waiting for the result.

Writing success.

Save the file.

Finally, let’s compare the original file with the new saved file.

They are exactly the same.

The files are identical.

Actually, the difference between Multi-Prog & VVDI PROG is already clearly: it works with these microcircuits, not only start recording. Therefore, you need to purchase the appropriate adapter SOP44. Everything will be fine.

Read also:

Xhorse VVDI Prog vs Multi Prog

Xhorse Multi Prog Read Renault Megane 2 UCH

 How to read Renault Megane 2 Scenic 2 UCH immobilizer data using Xhorse Multi Prog?

Quick search ‘uch’ and select Megane UCH

Check wiring diagram

After opening the module case, we take out the motherboard and solder our points according to the wiring diagram in the Multi-Prog tool.

It is worth equipping the yellow wire with a measuring needle. This will make it easier for us to find the right point.

Read eeprom. File size 4kb.

It takes 3s to read eeprom.

Save eeprom.

Read flash.

File size 256kb.

Xhorse Multi-prog read flash in 39 seconds. very fast.

Save flash.

www.vvdishop.com

Xhorse VVDI2 7.3.6 Adds VAG MLB Key Learning

 Xhorse VVDI2 key programmer released new software version V7.3.6 on March 31st, 2024.

*** 2024-03-31
*** Require firmware V7.3.5
************************************************************************
===== VAG V7.3.6 =====
1. Support MLB immobilizer key learning-Require VVDI-MLB TOOL
2. Support Fix dashboard data for MQB48-NEC35xx(Lock) type
3. Support Clone MQB48-NEC35xx(Lock) type dashboard (Copy CS/Component protection data from old data to new data)
4. Support Fix KM for MQB48-RH850 type-Require MultiPROG or KEY TOOL PLUS
5. Bugfix

===== BMW V7.3.6 =====
1. Bugfix

===== Porsche V7.3.6 =====
1. Bugfix

===== PSA V7.3.6 =====
1. Bugfix

===== Transponder Programmer V7.3.6 =====
1. Immobilizer data tool: Asia->China immobox->Simens immobox->93C56 add new type
2. Immobilizer data tool: Asia->Mzada->BT-50->95320 add 8C type
3. Immobilizer data tool: Asia->Honda->Bike(PCX/VARIO) display PIN code
4. Immobilizer data tool: Asia->Ducati->1199 Panigale->9S12 bugfix
5. Bugfix

===== Copy 48 (96 bits) V7.3.6 =====
1. Bugfix

===== J2534 V7.3.6 =====
1. Bugfix

===== Online Upate Tool V7.3.6 =====
1. Bugfix

===== Quick Start V7.3.6 =====
1. Bugfix

Free download VVDI2 V7.3.6 software
http://dl.xhorse.com/product/vvdi2/software/VVDI2-InstallerV736.exe

How to Get VW NEC35xx CS PIN with VVDI Key Tool Plus No Soldering

 How to get the CS and PIN code of Volkswagen Skoda white meter petrol car without lifting the pin or cutting the track? Following we’re gonna to do it with Xhorse VVDI Key Tool Plus. In this way, we can read the meter data for mileage adjustment. If it’s not working, we can also read and write this data directly for any online programming or coding.

Connection

Immo programming >> VW >> Select by type >> 4th immo system – Volkswagen/Skoda/Seat >> Instrument with NEC35xx >> Star programming >> Instrument NEC35xx lock >> OK

*Make sure the Network connection is normal.

Programmer reads files >> Adapter method

Here we can see the connection diagram.

It requires the XDNP87GLSolder Free Adapter.

With it, you don’t need to lift any pins from MCU or cutting wires on adapter. You won’t take risk to damage it.

Connect the solder-free adapter to MQB48 dashboard.

After done, connect to VVDI Key Tool Plus& a 12V power.

Get CS & PIN Code

Read >> Continue

Reading success.

Save the data file.

Obtaining immo data >> OK >> Load the saved data

Reading immo data successfully.

Click “OK” to save.

Generate dealer key – Load immo data >> Load immo data file

As we can see, the CS & PIN codes have already been available.

In this way, you don’t need to pay for the third party for password.

www.vvdishop.com

How to Solve Xhorse Multi Prog Failed to Update Firmware

  Problem:

Failed to update xhorse multi prog firmware (Jump recovery error). The current firmware is 1.1.0. Also failed to sync device. Any solution?

Solution:

Press and hold the Reset button on the main unit before powering on, and hold it for 5 seconds after powering on. Try to force firmware upgrade.