Xhorse Multi Prog Read Peugeot DCM6.2A ECU in Boot

Here comes the Xhorse multi prog feedback on PSA DCM6.2A ECU.

PEUGEOT DCM6.2A BIG IMPROVEMENT.
Write today another ecu from PSA DCM6.2A with multi prog, and see really HUGE improvement… some months ago when i write such of ecus it takes almost 15 minutes and i had and warning message from the tool.

but today it finished the writing in one and a half minute 1 min & 27 secs.

Checksum is done online with the multiprog.

Xhorse XDNP17 Porsche BCM Adapter Crack Failed Error Solution

 Problem:

Xhorse VVDI Key Tool Plus failed to read Porsche Macan 2015 BCM 5M48H using the XDNP17 Porsche BCM solder free adapter.

Error cracking failed: check the adapter and module connection. Chip crack Fail. Unknown error.

Any solution?

Solution:

Here are possible solutions:

1).

Check the jumper. Sometimes, if you put the jumper wrong, you will get this error.

2).

Had the same issue 1 time. Gotta clean off the connection points really good. To bare metal. Then make sure you are in the exact holes they are supposed to go into.

3). Try more attempts. If still has crack failed error, do as the key tool plus suggested. Try testing function 72 and 74 and report.

How to Solve Xhorse Multi Prog Update Error Code 1 Error Address 2

Problem:

Install Xhorse multi prog on a fresh Windows 10 system.  After database download, this error pop up.

Error:

“Corruption
Error code: %1, Error address: %2.”

Solution:

Your software version is very old. You use 1.0.8.0 so is far far old.

Very old software might fail to do update, download latest one.

Latest software is 1.3.1.0 (till Sep. 10th, 2025).

Download multi prog software here.

How to Activate VAG MQB48 Function for Xhorse Key Tool MIDI

 Does Xhorse VVDI Key Tool Midi come with MQB48 NEC35XX software license? Or I have to pay?

This is a frequently asked question about MIDI.

Here is the clue.

Key Tool Midi has 3 configurations:

The MIDI basic version does not have MQB48 function.
The MIDI advanced version does have an MQB48 function.

For MIDI Basic version:

You need to activate VAG IMMO4/IMMO5 license first. That means you need to update the basic version to the advanced version first.

For MIDI advanced version:

It does come with the MQB function.

To use the MQB function, you need to combine Key Tool MIDI with Multi Prog in the same account via serial number.

Read VAG MQB cluster data with multi prog, then upload data to the Key Tool MIDI to program key or reset mileage.

In short, if you have MIDI basic version, update to the advanced version. You don’t need to activate MQB48 license separately, just combine MIDI with multi prog into the same account, then you can use MQB48 function.

Xhorse Multi Prog Read BMW MSV90 DME ISN in Boot

 Xhorse Multi Prog read BMW 520i DME MSV90 ISN code successfully.

Boot mode.

Function:

Read INT eeprom
Read INT flash
Read MAPS
Read EXT EEPROM
Read EXT Flash
Read ISN code.