Can Xhorse Super Chip be used to Generate Mitsubishi ID44?

 Here comes the problem:

Mitsubishi space star 1999 eeprom 93c56 all keys lost.

I have regenerated a new vvdi super chip xt27 with xhorse key tool plus.

I have generated the transponder from eeprom 93c56 in red immobox, but the car refuses to start, keytool plus said me need to use pcf7935 (id44) or super chip. anyone ever had this problem?

Solution:

Be careful. Mitsubishi has specifics. First, the chip is 44 Mitsubishi. Second, the software is specific-ADS129.

For Id44, first generate xt27 as 7935 Id44.

Then choose 7935 chip when you make dealer key. Not xt27.

The best solution is to use ID 44 PCF7935 blank and transponder Zed bull program.

 id44 chip cannot be copied but can only be programmed. Here are the programming tips on Mitsubishi id44.

www.vvdishop.com

Xhorse Condor II Cut New Honda Civic thin key

 Xhorse Condor XC-Mini Plus II is able to duplicate a Honda Civic/Acura Integra SY key (pretty thin). The procedure includes 3 steps: cut the blank thin, cut key tip cutting & cut key bitting. The new Civic/Integra key is pretty thin, so we’ll use the No.123 key blank for duplication.  Condor II is the only Xhorse machine that can cut this super thin key.

Check on Youtube for full operations:

Step1. Cut The Blank Thin

1. Setting, Installation & Calibration

Settings >> Cutting setting >> Probe and cuter diameter setting >> 1.0mm probe, 2.5mm cutter, save

After installing M5 clamp, 2.5mm cutter & 1.0mm probe to Condor II, go to do a device calibration: Manual cutting >> Line mode >> Initialize

2. Detect Z Points

This is to determine the height reference points. Here we’ll first detect 6 points and 2 points next.

– Insert the key blank & tighten M5 clamp.

– Move the probe till it’s right above the key blank by pressing X/Y.

– Long press Z point to record the point.

*Currently XC-Mini Plus II supports recording 2-6 points. Users can record 6 points directly and cut it thin. However, these points have to be recorded precisely. And it’s hard to recod with human eyes(you may need a vernier caliper). So it’s recommended to record 8 points to finish cutting.

3. Cut Thickness

Start cutting >> 1.50mm cutting depth >> Cut

Just wait Condor Mini Plus processing…

Take out the key when completed, we can see the area within the 6 points are completely thinned.

Go on to cut the head part of the key.

Insert the key reversely.

Start cutting >> Cut

We’ve finished the 6-point area cutting.

4. Record Last 2 Points & Cut The Rest.

– Calibration again: Manual cutting >> Line mode >> Initialize

– Insert & tighten the key blank

– Detect Z point, then 2 points

– Cut 2 sides: start cutting >> 1.50mm cutting depth >> Cut

The key blank has been cut thin.

Step2. Key Tip Cutting

1. Mark the key blank based on the shape of the original key tip.
2. Manual cutting >> line mode >> Initialize
3. Insert the key blank & tighten the clamp.
4. Detect Z point & 3 marked points.
5. Start cutting >> 1.75mm cutting depth >> Cut

Cutting completed.

Step3. Key Bitting Cutting

Automotive >> Brand/model >> Civic >> SY

The 2 sides of Civic keys differ in bitting.

So we should decode both sides:

1. Insert the original key & tighten, A Side >> Decode key
2. Flip the key and tighten again, B Side >> Decode key
3. Remove original key to insert new key blank on clamp, A Side >> Start cutting >> Cut
4. Flip the key blank, B Side >> Start cutting >> Cut

Key bitting duplication completed.

Test Key

It can work perfectly to open the lock.

Done.

This is how to use XC-Mini Plus II to copy a Honda Civic/Integra SY key. More tutorials about Xhorse Key Cutting Machine to be updated.

www.vvdishop.com

How to Fix Xhorse VVDI Mini OBD Tool Bluetooth Connection Issue?

 Problem:

There is a new update on the xhorse vvdi mini obd tool. But I failed to connect mini obd with both mobile phone and xhorse key tool max via Bluetooth. Any idea how to fix it?

Failed to connect with key tool max via BT

Failed to connect mobile via Bluetooth either

Solution:

Download Mini OBD Tool FactoryTest_V1.8.exe

1. Run ‘factoryTest _V1.8.exe’ on pc and connect mini obd with your Pc, Select device port number

2. Click this button (Change Bluetooth Name) as picture below

3. If the software have this error (device not found), pls restart the software, plug and unplug the device to otry again

4. If the software shows this as picture below ( device is connected which mean it is successful). Then unplug the xhorse mini obd tool and use the mobile phone to update the device wifi firmware by using the WIFI connection method. You need to use the phone to connect to another wifi or another hotspot (don’t use your phone’s own hotspot ) to update the device wifi firmware.

Check: How to Update Xhorse VVDI Mini OBD Tool Firmware via WiFi?

How to Calculate Mercedes W215 1D69J Key with VVDI MB?

 Question:

Has anyone been able to get the password to a Mercedes Benz W215 with vvdi mb tool?

1D69J
HC05
put volts to pin 16

try like this but failed.

Solution:

Read EIS dump with HC05 adapter and try again.

Removing the mic

Read EIS dump with vvdi prog

Write key with vvdi mb tool successfully.

VVDI Prog Range Rover 06 CIM All FF Solution

 Problem:

2006 rang rover CIM. I was able to read using xhorse vvdi prog but file is all FF. All FF up and down. Any idea How I can repair, please?

Solution:

Check your connections.

there’s a small resistor you need to take off when you do it with vvdi prog.

make sure you read the instructions correctly.

put it on the soldering point.

Feedback:

Thanks, yes it worked now.