Need to add a smart key for a TOYOTA Prius Plus 2018 rest left hand drive.
Board number 89904-12370.
Original key
Key board
To use the Xhorse XM38 Toyota smart key we need to know what chip and transmitter frequencies the original key had.
This is TOYOTA, everything should be much simpler.
After reading the key, everything began to become clearer, and it no longer seemed so scary.
It is chip 8A, page 88.
radio transmitter templates. dual frequency
Choose template 0020 dual frequency. It’s just that these templates have different Page settings, somewhere 88, somewhere A8 or A9.
I write the option into the key. Then program the XM38 smart key to car.
Now a Prius with a key like a Camry.
In fact, it turns out that this key is not so unique. This is the same key as on the Camry 50/55 with only one difference, the Camry has a trunk release button, the Prius doesn’t have it, so the board number is different. A good alternative is the universal key from Xhorse xm38, you just need to configure it.
It is a Toyota Land Cruiser Prado 150 2013 with keyless entry system. Here we will show how to add a spare key to this module using xhorse vvdi key tool max pro and XM38 smart key.
First, read the information of the chip and radio channel from the original remote control.
At the top are the Xhorse keys, and below are the original ones. Xhorse keys are very nicer than their relatives.
We read the data on the chip and radio channel from the original keys, click generate remote control.
Preparing/generating a new key/remote.
Programming the immobilizer, selecting the brand, model and immo system.
Turn on ignition switch and confirm.
Select Add Key.
We see the number of keys registered in the system is 2 and the maximum number is 5.
Put the original key close to the engine Start button within 30s, you should hear a beep.
Put the Xhorse XM38 Toyota smart key to the ignition switch.
Here we see that the number of registered keys has become 3, and the number of which can be additionally registered has decreased by one.
It says that if the remote control does not work, you need to perform a synchronization procedure.
The key was added without any problems.
It’s a Renault Scenic with ID46 chip key. We’ll make a key using xhorse universal smart key.
We will use vvdi mini key tool.
We generate a Xhorse XSKFF0EN 4-button smart key
Let’s take it apart, put the board into the mini key tool programmer, again select our car, the remote control with the ID46 chip and press for generation.
Generate remote completed successfully.
and then we go to the car, program key with key tool, for example, RenoLink.
We place the board from the key in the card slot with the chip at the bottom, this is the only way the receiver will detect the card.
Select your car and read PIN
then click Connect, click Test Presence, it has determined that there is one native card and there is an empty card in the slot
then click Start Learning, the card is detected in the reader
check the box, click Learn Key Card and add our native card again. at the bottom the light turns red Card Learnt OK means the card is programmed.
Next, click Validate, then Cancel and click Disconnect. Exit the application, close everything, disconnect.
We press the buttons of the new remote control, everything works, we collect the key, we get out of the car, we close the doors, we press the close button and… here it’s a bummer, the close button does not work and only the turn signals blink, we press the other buttons, the panic button works, the headlights turn on and off, opening the trunk opens the car, and the door open button, on the contrary, closes the doors. In short, the buttons do not work as they should. Let’s connect again to the xhorse mini key tool, insert the key and read the information on the buttons.
We see this picture, the top 4 indicators are buttons and the code in numbers corresponds to the command.
panic button – 01 corresponds to reality, lock button – 08 and it unlocks it, so we write code 08 on the unlock button, then the trunk has code 04 and it unlocks the doors, again we enter code 04 for the unlock button, and accordingly the code remains 02 is the opening of the trunk, enter it for the trunk button and press the INSTALL button at the bottom of the display. all settings are saved, codes are registered.
Then we go to the car and check how everything works.
Here we collect some frequently asked questions of the new Xhorse VVDI MLB Tool.
Q: The tool just copies a working key data and transfers it to a new blank key?
A: It doesn’t copy a working key , it just calculate the CS from that key , in order to make a dealer key with other key . And then add key by obd always with VVDI2 or VVDI Key Tool Plus , just load the file MLB tool makes you save and with that CS it will start key learning process.
Q:It is a copy of KYDZ?
A: No, they are difference, VVDI MLB tool is better by far and faster.
Q: Only add key, how about sync data?
A: Only add key, cannot do all keys lost. Add key don’t need sync data.
Q: Does it require tokens?
A: If OEM key require 200 points, if specific mlb xhorse key points not required.
Q:What key to use?
A: OEM key or Xhorse MLB key (coming soon).
Q: Original key can renew?With this tools.
A: No, it cannot.
Q: Is learning completed through something like ODIS or can vvdi2/Key tool plus do it after dealer key is made?
A: learn key with vvdi2 or key tool plus after generate dealer key.
Q: What is the whole process of adding the key?
A: Reading data, making dealer, learning.
Here is an example
How to Use Xhorse VVDI MLB Tool with VVDI2 or VVDI Key Tool Plus?
Q: is it possible to make all keys lost?
A: No, only add key.
Q: is it compatible for the European market?
A: Global market.
Q: Where can i download software for PC?
A: Download software here
Free Download Xhorse VVDI MLB Tool Software
Q: Is it free update?
A: Yes, firmware and software update online for free. Just click Update online tab.
Q: just copy one working key to a xhorse universal, or will it precode oem/aftermarket keys so you can do add a key?
A: Precode OEM key to add a spare key.
Q: Need to remove chip?
A: No need to remove mcu chip.
Q: Does it work with key tool plus pad or only vvdi2?
A: The VVDI MLB Tool works with both vvdi2 and key tool plus.
Q: How to do key calculation by vvdi2 ? Is not possible
A: Calculate immo data with MLB tool and learn key with vvdi2 or key tool plus.
Q: So do we need to take out capacitors/resistors, or completely solder free? (I know no need for CPU removal) also-will there be PCB adapters for Bentley and Lamborghini? Thanks
A: Need to remove 2 capacitors. The MLB tool works on Bentley and Lamborghini as well.
Mercedes Benz E320 2009 W211: Xhorse VVDI Key Tool Plus added a new 2 button aftermarket BE key, position #6, disabled #1 lost key. All done in 20 minutes. The calculation took only about 5 minutes! Cost 1 free token. Great job Xhorse!
The customer wanted 1 new key with 2 buttons. He’s lost the #1 key. The #2 key is still in his possesion. But he isn’t sure whether the #1 key is just somewhere hidden in the household. So I decided to disable #1 key to be able to enable it if the key should appear somehow somehere. And just added the new spare key to the system. All keys lost would be an unnecessary waste of 2 tokens instead of 1. And a risk.