Xhorse Multi Prog Read and Write Simos PCR 2.1

 Xhorse Multi Prog new user feedback:

Successfully read VAG Simos pcr2.1 ECU on bench.

Last time failed with this Ecu, and I noticed a issue with multi prog power adapter.
That 4 amps charger is fully induction (a/c noise in out put) once connect my usb cable to pc, mouse pad also stock due to multi prog SMPS noise.
Just connect with my old Power supply and everything works.
That ecu already bench read by fc200 so there’s no need unlock.

Checksum by multiprog.

I didn’t unlock anything …I just read flash in bench the write mod file. It reads full flash data.

pcr2.1 when start read go to 3-4amps in sec.

VVDI Key Tool Plus Program 2019 Peugeot 2008 Key via XM38

 This is a tutorial on how to add a 2019 Peugeot 3008 proximity key with Xhorse VVDI Key Tool Plus by OBD. Please learn the procedure below step by step.

Tools Required

Xhorse VVDI Key Tool Plus

XM38 Smart Key or XZPG00EN Special Smart Key for Peugeot Citroen DS 

Battery Maintainer

1. Use a maintainer to keep the battery stable.
2. Connect VVDI Key Tool Plus to the OBD port of the vehicle.

Operation

Remote program >> Europe >> Peugeot >> 3008 >> 3008(2016+) Remote FSK ID4A >> Generate

Writing data, please wait…

Burn success.

IMMO programming >> Europe >> Peugeot >> Password reading >> Type 3 CAN(adding) >> Start programming >> Read password

Please make sure ignition switch is at OFF status.

Switch ignition off and wait for 5s, then switch on, keep repeating this process.

Password has been read out.

Take note of the password. You’ll need it afterwards.

Select by model >> Peugeot >> 3008 >> With smart >> Start programming >> Start keys programming

Please turn on double flash lamps(security warning light).

Note: the wrong password will be forbidden to match!

Please enter the password

Place the wanted programming smart key into sensing coil

(In the smart key slot inside the glove box under start button or at the key sign at the bottom left of steering wheel)

Note: If there is a key that can start the car, insert the key first.

Current key match successfully.

Whether to continue to match next one? Yes.

Please remove the smart key, put the next wanted programming smart key into the sensing coil position.

Program complete!

Start the vehicle after each key performs the following operations:

1. Insert the smart key to the card slot.
2. Switch ignition to ON(do not start the car) and wait for 3s then switch off, then remove the smart key and click LOCK button for 5s…

Note: If the remote still can not use after performing the above operations, try the following operations:

1. Remove the smart key, switch ignition on for 3s then switch off, then click LOCK button for 5s.
2. Leave the key near the induction coil inside the car, close the door, and wait for 30 minutes.

Test the new key, it can work.

Perfect done!

www.vvdishop.com

Xhorse MQB Adapter Write Error 00 Solution

 Problem:

Tried to read VAG MQB D70F3532 cluster with xhorse vvdi prog and MQB solder free adapter, read works, write does not. Software says write error (00). Any solution?

Solution:

1.Make sure your vvdi prog software is up-to-date.

2. If reads ok, write does not, use a hot gun to heat the chip with a temperature 200 degrees (Do not exceed 350 degrees).

3. If still fails, then use cut pin method to read/write this cluster.

Xhorse Multi Prog Adds VAG SIMOS18.3 in Boot Mode

 Xhorse Multi Prog ECU and TCU programmer released new database version V24 on May 20th, 2024.

Multi-Prog V24
2024-05-20 21:01:28
* Fix the FAW BCM-3(MC9S12G128) option in <OTHER-><FAW>-><FAW>
* Fix chip read exception problem in MPC556X and MPC555X series chip
* Fix the R7F701312 option failed to set the vibration frequency
* Fix the MC68HC711E9 and MC68HC11E9 option connection failure problem
* Fix some ME7.5 ECU connection failure problem and optimize the process
* Update the Great Wall air bag wiring diagram
+ The models of the read and write function modules that support Boot mode on the ECM are as follows：
1.VAG_CONTINENTAL_SIMOS18.3
+ Add R7F701331
option in
<MCU>-><RENESAS>-><RH850>
+ Add ST72321AR6,
ST72321AR7,
ST72321AR9,
ST72321J7,
ST72321J9,
ST72321R6,
ST72321R7,
ST72321R9,
ST72521BAR6,
ST72521BAR9,
ST72521BM9,
ST72521BR6,
ST72521BR9,
ST72F321AR6,
ST72F321AR7,
ST72F321AR9,
ST72F321J7,
ST72F321J9,
ST72F321R6,
ST72F321R7,
ST72F321R9,
ST72F521AR6,
ST72F521AR9,
ST72F521M9,
ST72F521R6,
ST72F521R9
options in
<MCU>-><ST>-><ST72XXX>
+ Add HC908EY16,
HC908GP32,
HC908GP32_UNLOCK_ERASE,
HC908JB16,
HC908JB16_UNLOCK_ERASE,
HC908QT1,
HC908QT2,
HC908QT4,
HC908QY1,
HC908QY2,
HC908QY4,
HC908Qxx_UNLOCK_ERASE options in <MCU>-><Motorola>-><MC68HC(9)08>
+ Add DELPHI_MT62.1 option in <ECU>-><BAIC>-><HYOSOW>
+ Add ACDelco GM E83 MPC5565 JTAG option in <ECU>-><BUICK>-><Regal>
+ Add NETA U BCM(SPC5744B) option in <OTHER>-><NETA>-><NETA>
+ Add W212 EPS(MC9S12XEG128) option in <OTHER>-><Mercedes>-><Mercedes>
+ Add Cayenne Steering Gear (2018-)(SPC56EL60) option in<OTHER>-><PORSCHE>-><PORSCHE>
+ Add VOLKSWAGEN-STEERING-COLUMN(R7F701312)option in <OTHER>-><VOLKSWAGEN>-><VOLKSWAGEN>
+ Add SERES AITO SF5 EPS option in <OTHER>-><SERES>-><AITO>

Press Update Online tab to update software, firmware and database.

Multi Prog pinout to VAG Simos 18.3

Supported models: Audi A3, VW Lamando, VW Teramont, VW Altlas, Skoda Superb

Working mode: Boot

www.vvdishop.com

How to Decode Ford New HU198T Key Blank by Xhorse Dolphin XP005

 We have a customer who successfully decoded and cut 2022 Ford Maverick HU198T key blank with Xhorse condor ii under Escape HU198T.

Here is another way to decode and cut new HU198T key blank if you don’t know decode under Escape HU198T.

It is a 2024 Ford Mavericks. It has new HU198T key blank.

Let’s control the Xhorse Dolphin XP005 key cutting machine by the VVDI Key Tool Plus.

Go to Cut key-> Vehicle database
If selected by model Ford->Maverick, no 2024 HU198T is available. So we cannot go by car.

We scroll down All key blank. There are 4 HU198Ts. The difference is the depth.

All 4 of them say 10bits,  this one if we go into it we can see down here it has five depths.
Another one has four depths.

We are not sure about which to choose.  What happens if you decode it with the wrong key blank.

For example, let’s decode under 4 depths.
What it decodes is wrong.

If we go find bitting, it is not going to come up with anything.

Then we go to the 5 depths, the bitting the same.
But try find bitting, still no data.

Let’s select 1st one that also 5 depths.
Still got the same bitting.
If we go to find bitting, we got the key code this time.

That’s correct.

We can cut key by Dolphin XP005 with the key code.

What is the difference between the 2 five depths?
Looking at those little numbers down next to 12345.

One has little number and one does not. That’s the difference.

If you want to be safe, find one you know if you are decoding an existing key and you don’t have the vantage of having a code.
Do a little trial and error and if you find one that spits out a code when you hit the find bitting button, it is pretty safe to say that you got the right one.

www.vvdishop.com