VVDI Key Tool Max Pro Program Prado 2013 XM38 Smart key

 It is a Toyota Land Cruiser Prado 150 2013 with keyless entry system. Here we will show how to add a spare key to this module using xhorse vvdi key tool max pro and XM38 smart key.

First, read the information of the chip and radio channel from the original remote control.

At the top are the Xhorse keys, and below are the original ones. Xhorse keys are very nicer than their relatives.

We read the data on the chip and radio channel from the original keys, click generate remote control.

Preparing/generating a new key/remote.

Programming the immobilizer, selecting the brand, model and immo system.

Turn on ignition switch and confirm.

Select Add Key.

We see the number of keys registered in the system is 2 and the maximum number is 5.

Put the original key close to the engine Start button within 30s, you should hear a beep.

Put the Xhorse XM38 Toyota smart key to the ignition switch.

Here we see that the number of registered keys has become 3, and the number of which can be additionally registered has decreased by one.

It says that if the remote control does not work, you need to perform a synchronization procedure.

The key was added without any problems.

www.vvdishop.com