How to actitve Free OBD48 Cloning for VVDI2?

Xhorse released new year promotion- Free OBD48 cloning activation for Xhorse VVDI2 key programmer.

From Jan. 1st, 2020.

It is for VVDI2. VVDI Key Tool does not have OBD48 copy function.

Providing your VVDI2 serial number to us to activate.

Contact us to activate the license for free.
Skype: VVDIfactory.com
Whatsapp:  [phone]
Email: [e-mail]

BMW E90 CAS3 Bricked Solution with VVDI2

I dumped and modified the OL15Y chip in my CAS3 which seemed to go well, until I tried to start the car. The mileage was reading the same on the Dash and CAS readouts in INPA, but whenever I went to start the car, it would spin the starter motor but no start.

I tried to run the CAS>>DME sync in Inpa and also ISTAd to clear the fault for my CAS and DME to communicate, but it failed every time saying “incorrect start value during start value matching”. The fault codes are 4A62 and 4A63 (EWS tampering).

I purchased a spare CAS with the same hardware number and wrote my dump to it, but the car would not communicate with it

Tonight I’ve dumped from my original CAS that would not start the car to check the readout, all looked ok to me, [s]but now I’ve messed up with the soldering iron and damaged the CAS so it won’t respond.

Senior professional advice 1:

You have Xhorse VVDI2, it’s simple. RESTORE original dump to CQS. Choose “file make key” option and tick the box 16 or 64 attempts to start.

Program the key with programmer and try starting. When it doesn’t , put key in programmer and click the window where it says “not start”. After a few attempts it’ll fire up. Done.

If you try doing the same with OBD the tool will mess up your CAS eeprom which happened to me. Car will start once but then you’ll have a A0AA code in CAS.

Thanks

www.vvdishop.com

Program Range Rover 2015 Up Key by Xhorse VVDI2

How-to: add a new key to Land Rover Range Rover 2015 up using Xhorse VVDI Prog and VVDI2 key programmer.   It is also work with all key lost by the same way.

Main steps:

Read KVM  RFA data

Write Key

Rewrite data

Step 1: Read KVM Data

Remove the KVM module

Locate IC Chip RFA MC95S12XET265

In VVDI Prog software, select Land Rover->RFA Unsecured (MC95S12XET265)

Check connection diagram

Connect KVM module with vvdi-prog through MC9S12 adapter

Read D-Flash and save data

Read EEPROM and save data

Step 2: Write Key with VVDI2

In VVDI2 software, select Transponder Programmer

Select Euro->Rover->-Rover/Jaguar 2015-

Load RFA DFLASH and EEPROM data respectively

select a unused key position

Insert new key into VVDI2 programmer

Select Make Dealer Key

Prepare dealer key success.

Write the new dump file to RFA module with programmer

Check key status

Show key ID.  The key can start the car.

Step 3: Rewrite Data 

In VVDIProg software, open EEPROM and write new dump to RFA module

Open and upload DFLASH and write new dump to RFA module

Install RFA module to vehicle.

Test thew new key.

Done.

www.vvdishop.com

http://www.vvdishop.com/service/vvdi-prog-and-vvdi2-program-range-rover-2015-key.html

How to solve VVDI2 Cannot Find Problem?

Have Xhorse VVDI2 Commander Basic Function, installed V6.6.6 software, when update the software, get error ” vvdi2 can’t find”.

vvdishop.com solution:

Please update the firmware of VVDI2 in the UpgradeKit.

UpgradeKit software free download here:

https://mega.nz/#!BYhnmQ4A!K5LEu2ZjhBDMDOOkYMPCJjs-PuArEOAc5nKhUe57ERo

Size: 30.7 MB

Download the above mega link and unzip it.

Double click on “Upgrade kit.exe”, click on “Yes” to update the newest version.

Select Device: VVDI2

Click on “Find Device”.

Click on “Upgrade”.

Firmware upgrade successfully.

That’s right.

www.vvdishop.com

How to change New Phone Number to Xhorse VVDI2?

If you require a new phone number to be bound the Xhorse VVDI2, how to do? If VVDI2 is bound with a new number, the bonus points will be cleared out?

vvdishop.com engineer will answer you one by one:

The answer is yes, you are allowed to change a new phone number bound on the Xhorse VVDI2. And yes, the bonus points will be as long as your account has device.

There are 3 steps to change the phone number bound on Xhorse VVDI2:

1. Register one new user account.
2. Login the old user account, give bonus points to the new account (Please make sure there is one or more devices activated, only then can new account obtain the bonus points)
3. The devices will be unbounded from the old device one by one, and bound to the new account.

Attach 3 images of giving bonus points to others:

Thanks.

www.vvdishop.com