First time I tried to generate an xhorse vvdi super chip as a PCF7935 but it didn’t work with the Alfa Romeo 166. Then i generate the xt27 as ID44 Volkswagen. That’s how it worked.
1. Generate super chip as ID44 Volkswagen
Insert super chip into vvdi key tool max
identify chip type PCF7936
Go to Generate transponder function
Generate as ID44 Volkswagen
Generate remote success
2. Write key with VVDI2
Now you can write key with vvdi2
insert super chip into vvdi2
Go to Immobilizer Data Tool
Upload EEPROM data
Make dealer key
Select PCF7935
Program dealer key success
Now the key can start car
Read also: Tips to write Super Chip as PCF7935 to BMW
How do I change the mileage on this Cas3 0L15Y using Xhorse Vvdi Prog?
Solution:
The mileage is in the 2 first line. Vvdi prog is only for read and write on CAS. You need vvdi2 for editing. Send a file to someone or use other tools to edit mileage.
vvdi2 can edit CAS eeprom to 0km, then save and write with vvdi prog.
In VVDI2, go to Special Function – Change KM. Works 100% for CAS3, CAS4 dash.
You need to do dash and CAS. In CAS you need to do 0km and in dash that what you need.
As titled, possible to add key to an Audi Q5 2015 BCM2 encrypted using Xhorse VVDI2?
Yes, both add key and all keys lost.
Tips:
How do you do it when it is encrypted?
plug into car obd try read and make note of part no and software version, take bcm2 out put adaptor on for prog and read data1 under correct setting on prog, load data1 into vvdi2 and check info is correct, read data2 on prog and load into vvdi2, now you have immo file and service file, write service file back with prog, now put bcm2 back on car and program obd with immo file.
Read detailed operation instructions here:
https://www.vvdishop.com/service/use-audi-bcm2-adapter-with-vvdi-prog-vvdi2.html
and guide with key tool plus here
https://www.vvdishop.com/service/use-xhorse-audi-bcm2-adapter-with-vvdi-key-tool-plus.html
As titled, here vvdishop.com introduces 2 methods to read and write Audi BCM2 D70F3634 mcu with xhorse vvdi prog programmer.
Method 1:
Soldering method.
Follow vvdiprog wiring diagram to connect bcm2 with vvdi.
You should remove the 0 ohm resistor.
Select 4 Immobibilizer – Audi – BCM2 D70F3381/3534
Read ID, Read D-flash and save
Write D-flash
Method 2:
Solder free way. VVDI Prog Audi BCM2 solderless way should be performed only after you get instructions in VVDI2.
BCM2 D70F3634/3381 solderless wiring diagram
For detailed operation guide, check the previous post: How to use Xhorse Audi BCM2 Adapter with VVDI2 + VVDI PROG?
Here comes the clue on Audi A3 2003 to 2005 cannot learn key in all keys lost situation.