Xhorse Multi Prog Read Land rover Encrypted KVM 9S12XEQ384 with Adapter

 Xhorse Multi Prog read Land Rover 2016-2019 encrypted KVM 9S12XEQ384 with XDNP16 KVM solder free adapter successfully.

Connect XDNP16 KVM adapter with multi prog via DB25 connector.

In Multi-prog software, select Land rover->RFA Secured 9S12XEQ384 (Adapter)

Read D-flash

Read eeprom D-flash successfully.

Read P-flash

Read P-flash in 1min 33s.

Save p-flash.

Note: If you have chip crack failure error when reading KVM with the XDNP16 KVM adapter,  clean the 1st and 3rd leg on the Oscillator and adjusting the Pogo pins inwards usually solves the cracking issues.

How to Solve Xhorse Multi Prog USB Device Not Recognized Problem

 Problem:

Xhorse Multi prog was not detected by the Windows 7 system. It says USB device is not recognized. Any solution?

Solution:

If it is Windows 7 system, you should install driver for multi prog manually.

Follow guide here to install driver for Win7.

How to Install Xhorse Multi Prog Software Driver?

If Win10, it will automatically install driver.

www.vvdishop.com

Xhorse Multi Prog Read Land Rover EPS Module

 Xhorse Multi-Prog read and write Renesas V850 EPS (Electric Power Steering) module on a Land rover Range Rover Sport.

Processor: Renesas D70F3485

Using wiring diagram pinout (Land rover Evoque/Benz W166 EPS D70F3483/3485)

You can repair or replace a new EPS module.

Read Dflash and Pflash.

Then write Dflash and Pflash.

www.vvdishop.com

Xhorse Multi Prog Read BMW MSD80.2 ISN Code

 Xhorse Multi-Prog read BMW Continental MSD 80.2 DME on bench successfully.

Got a “faulty” ecu from BMW, MSD 80.2 and test it on bench with xhorse multi prog.

The pinout in multi prog is wrong. Buy you can read successfully on bench the ecu with the correct pin out.

Read INT eeprom(empty) full flash, maps, ext eeprom, and ISN code successfully.

Writing work also. We have done few on bench.

www.vvdishop.com

Xhorse Multi prog Read BMW CAS4+ 5M48H with Adapter

We here just to inform you that Xhorse Multi Prog software V1.2.3.0 and firmware V1.2.7 fix the issue that the adapter for the CAS4 not working with the multi prog.

Firmware V1.2.7 fixed 9S12 reading issue using CAS4+ solderless adapter to decode CAS4+ (5M48H).

XDNP CAS4 adapter has two versions, V1.2 and V1.3.  The V1.3 new type of adapter with rely inside, V1.2 does not.

The old one V1.2 CAS4 adapter works perfectly.

This is a 2013 BMW 640i CAS4+. We set up the CAS4 solder free adapter with module and multi prog.

Menu: Immobilizer->BMW->CAS4 5M48H BACKUP (Adapter) option

Then read D-flash.

It is trying to decode the chip.

Read D-flash successfully. The file is huge.

We get a good read.

www.vvdishop.com