Read MC68HC08AZ32 with UPA USB or Xhorse Multi Prog

 It is a processor MC68HC08AZ32. Try to read the processor from Security Byte using two programmers, Xhorse Multi Prog and UPA-USB S.

See which one is better at this processor.

UPA S:

Processor blocked from reading, read each cell from EEPROM area as AD

Multi Prog:

Everything works better when connected to a computer.

Attention!!!
If you do not have a special password to read data from the processor, use Multi-PROG, which automatically finds the Security Byte in the MC68HC08AZ32 processor.

www.vvdishop.com

Xhorse Multi Prog Read Mercedes EDC17CP01 on Bench

 Xhorse Multi Prog programmer read Mercedes Benz Bosch EDC17CP01 ECU on bench successfully.

Quick search EDC17CP01 and check wiring diagram.

Connect multi prog with ECU follow the pinout

Read INT EEPROM and save.

Multi-prog read INT eeprom in 1min 24s.

Read INT flash and save.

Reading flash takes longer in 3min 12s.

www.vvdishop.com

How to Use Xhorse Multi Prog EDC17 IMMO OFF Function

 It is a Landrover Discovery 2013. Here we show how to read EDC17CP11 ECU and turn immo off with xhorse multi prog programmer.

With multi prog you can enter Bosch number to query ECU type. It is a Bosch EDC17CP11 ECU.

In software, select  Land rover Bosch EDC17CP11 (Land rover-Discovery)

Check wiring diagram

Connect Multi prog with ECU follow the pinout.

Then read and save INT eeprom.

Read and save INT flash

Read ID ok, read flash ok

Read and save EXT flash.

Xhorse Multi-prog can do some MED17 and EDC17 IMMO Off but not all ECUs.

Go to Tool->Turn off the IMMO (IMMO Off).

If you search EDC17CP11 there is no ECU in the list.
It is a TC1796, so we try to use the TC179x that means any number can do that.

Load EXT flash

After load EXT flash, Press Turn off the IMMO

Press OK to generate immo off file.

Successfully generate immo file. Save the immo off file.

www.vvdishop.com

Xhorse VVDI2 MQB49 5C IMMO Error Code 5000

 Problem:

I managed to read this dash VW Crafter 2019 MQB49/5C and saved the dump by Xhorse Multiprog, but when I load it to VVDI2 it can not decode immodata. I want to add a key to the car.
Any idea where is the problem?

Solution:

Only 5A cluster for immo data decoding
5C only for KM. Cannot do immo data.
Mqb 49 is not decoded by any machine.

VVI2 will add key MQB 49 5C but still need to get sync data. It cannot do MQB 49 5C all keys lost.

see more here http://blog.vvdishop.com/will-xhorse-program-vag-mqb49-5c-key/

Xhorse Multi Prog Read ECU via OBD?

 Some users asked what the Xhorse Multi Prog OBD cable in the package is used for.

The OBD cable connects multi-prog with vehicle via OBD connector to read ECU by OBD.

Multi-prog supports some ECU reading/writing via OBD.

No specific ECU list is available.

Just check multi-prog software, see if there is OBD mode option.

If yes, connect multi prog with vehicle via OBD cable.

www.vvdishop.com