Model: Mercedes Benz W238
Part number of airbag module: A2389008100
Processor MCU Chip inside: SPC56AP60L3
Tool used: Xhorse Multi Prog
Read and write modified dump to SRS with multiprog.
No fault code stored in srs control unit.
VVDI Prog also read this airbag module.
Pinout to vvdi prog
CPT 2 –> VVDI VCC RED
CPT 3 –> VVDI TDO GREEN
CPT 4 –> VVDI TDI PURPLE
CPT 6 –> VVDI RESET YELLOW
CPT 7 –> VVDI TMS BLUE
CPT 8 –> VVDI TCK BROWN
CPT 9 –> VVDI GND BLACK
Here comes the wiring diagram pinout of Renault Clio IV HFM ( Hands free module) to Xhorse multi prog programmer.
Credit to Ballongue.
MCU RENESAS V850 D70F3633
for reading:
Go to MCU->Renesas ->V850->D70F3633
not by Other -HFM
People had problems with Xhorse Multi Prog CH version.
After updating the database (since database v89), they may have these problems:
Your device is CH region (after serial number you can see (CH), CH region need to be used with Chinese language. Vise versa.
You’d better change your device from CH version to GL version in the long run.
VVDISHOP.COM provides the online activation service- update your multi prog CH version database to GL English.
Update multi prog CH version to GL version.
Provide us with your Multi Prog serial number. Once your serial number is verified, Xhorse will change your device database. This process does not require any hardware changes and is done through software.
Xhorse Multi Prog new user feedback:
GPEC2 clone for Jeep Cherokee %100.
Model: Jeep Grand Cherokee
Year: 2014
ECM: FCA Continental GPEC2
Mode: Boot mode
We will speak about the difference between Xhorse VVDI Prog and Multi Prog programmers.
If you want to buy a new programmer who can help you read the eeprom and flash, also you want to have it for the engine ECU and for the gearbox, of course, the multi prog is one of the best
business. One of the best deals because of his price. He does not have an subscription. You don’t need to pay every year.
For EEPROM & Flash:
If we go throught the menu on both of them, on eeprom and flash both of them are similar. Like 99% is similar.
For airbag:
Both of these programmers similar. They are not made for airbag.
For engine
In vvdi prog we only have a few of them but in Xhorse Multi Prog we have an entire list.
Clearly the Multi Prog is the winner.
For gearbox
We cannot find gearbox menu in vvdi prog, it only does few chips/mcus. vvdi prog is not makde for this because it is much older device.
Multi Prog supports both engine ECU and geabox TCUs. Multiprog will read, write and clone gearbox TCU, vvdiprog does not.
Multiprog is the winner.
For Dashboard:
On the dashboard we have differences on Audi and also Mercedes, we will read Audi A3 2018, MB 204-212, MB 213, MB 222 dashboard with multi prog. VVDI prog does not.
Multi prog will read and write MQB RH850/V850 cluster with RH850 adapter. VVDI Prog cannot.
For Immobilizer
On Audi, Honda, Ford multi prog has a really great function. For those people who work with Opel you have the immo box function in vvdi prog.
Multi Prog will read Audi A7 BCM1, Ford Mondeo BCM, Honda 2021, Nissan Immo R8F701019, R7F701025, Volvo CEM XC90, S80 BCM, vvdi prog does not.
Another function is the battery. VVDI Prog does not have this function. It is a big plus for the multi prog again.
We take now another function from the software order.
It the big plus again for multiprog is the steering column on Audi 8 you have the electrical plgm reverse R AC controller on audi4.
We have Porsche steering gear and also the lithium battery on multi prog.
For MCU:
It is a big difference.
It was improved. multi prog supports much more MCUs than vvdi prog.
NXP is also different.
Also very important was on Infineon.
They are quite different.
Multi prog is much easier to search for them. Go to the search menu and you type something and you have it. It does not need to be same selected. This search work really good,
Special Function
Pin calculator is a great function for who need this function on vvdi prog. It is a plus for vvdi prog.
multi prog will read MQB ELV data and decode with vvdi2. vvdi prog cannot.
Xhorse Multi Prog can do IMMO Off, file format conversion, pass generator, it also does checksum correction for some ECUs. multiprog also has scripts functions. vvdi prog cannot do this.
conversion of these files it is for free you don’t want to pay it and it’s quite good function of multiprog.
Update:
They put a lot of updates on the multi prog than vvdi prog. You can update software, firmware and database directly in software.