Can VVDI Prog Read BMW ECU MSV80?

Question :

VVDI prog can read this ECU BMW MSV80? i want to clone ECU.

 

Solution:

You can’t clone msv80 with vvdi. Otp sector ISN. Read used DME ISN and write it to CAS.

Vvdi prog can’t read this ecu! VVDI2 & VVDI BMW yes, read isn via OBD /by ecu pinout. Then you can put ISN of DME to CAS.

IM608 and Autohex II will read the ISN as well.

www.vvdishop.com

VVDI Prog and UPA which is better?

Vote: Xhorse VVDI PROG or UPA USB PROGRAMMER for mcu and eeprom.

The result is most users recommend VVDI PROG.

In details…

@ volavka review:

VVDI Prog buy and enjoy.

@ wosanyn31 review:

Vvdi prog is very good, supported and easy to use, but had some problem writing some eeproms which I did read n’write nicely with clone orange5. I’ve only use orig upa to read motorola MCUs with clone’s adapters

@ ecuboost review:

VVDI PROG has a very good price compared to the competition (like all VVDI products). VVDI PROG does a lot of things, from CAS4 to copying eeprom in old ECUs. VVDI PROG doesn’t make many Motorola MCUs for this you need xprog or upa ( e.g. Mercedes ECU Bosch ME2.0 ).

for VVDIPROG buy an eeprom clip. Makes work a lot easier.

@ sindy review:

Vvdi-prog is very good.

@ dvdpgn review:

I highly recommend VVDI.

…..

And the topic is continuing.

One more question, where to have VVDI PROG?

There are not only one shop online who will sell you VVDI-PROG.

Therefore it is always nice to have a company recommended that someone has experience with.

This is the people I recommend: www.vvdishop.com.

Chrysler OCM 56043195AT mcu 3L40K pinout to VVDI Prog

Here’s the wiring pinout to Xhorse VVDI PROG programmer.

Chrysler Occupant Classification Module connection

MC9S12DG128_Secured

3L40K

Pic 2: Chrysler OCM 56043195AT mcu 3L40K

www.vvdishop.com

Read Nissan Airbag R7F7010183 by VVDI Prog

Question:

How i can read this micro with vvdi prog programmer
Renesas R7F7010183 from Nissan micra Airbag?

Feedback:

It worked using connection in the picture attached. Need to set voltage to 3.3v.

Xhorse vvdi prog missing 3.3v pin?

One question about Xhorse vvdi prog: why is the 3.3v pin missing and the others are there when i look on the internet the 12v and 5v pin is absent and the 3.3v is there.

Xhorse chief engineer replied:

This does not affect the usage. The 3.3v pin is cut off when it leaves the factory, in the past, some customers accidentally short-circuited the power PIN, which will cause short circuit of the VVDI Pro device.

VVDI-PROG tech support: www.vvdishop.com