VVDI MB Benz Power Adapter vs Key Tool Plus Power Adapter

 Xhorse VVDI MB Tool and VVDI Key Tool Plus use different MB power adapter for Benz password fast online calculation.

These power adapters cannot be mixed used, otherwise, you will get “MB Power Adapter Response Error”.

They can be identified by their appearance.

This is the MB power adapter for VVDI MB. It has 1 hole on 1 side only.

This is the MB power adapter for Key tool plus. It has 1 hole on both sides.

Program Volvo FM Truck 2008 Key with VVDI Key Tool Plus

 User report: Volvo FM truck 2008 making a second spare key using xhorse vvdi key tool plus successfully.

Make key by dump. eerpom 93C66. You remove the gauges and the immo box sits behind it. The chip cannot be cloned.

In Immo data tool, choose make via option Volvo -Trucks FH12 (93C66)
PCF7935 transponder.

Make key via super chip xt27a.

Xhorse VVDI MLB Tool Read Porsche MLB Key Immo Data

How-to: read Porsche MLB Key Immo Data by Xhorse VVDI MLB Tool Key programmer.

Place the key in the device identification area and click OK for identification.

Read key ID and info. The key is locked.

Remove key shell and take out PCB.

Check wiring diagram. Need to remove capacitors.

Then solder wires to the key board.

Place the key in the VVDI MLB Tool identification area and click OK for identification again.

Select Collect key data.

Choose Collect original keys- points deduction. The calculation will deduct 200 points.

Online calculate immo data completed.

Save data.

Now you can make dealer key and learn MLB key.

www.vvdishop.com

How to Solve Xhorse Multi Prog Not Connect to the Device Error?

Problem:

Trying to read a Mercedes W906 9S12DT256 with xhorse multi prog, it said not connect to the device and will not read mcu. Any advice?

Solution:

First of all check the connection. If the connection is fine, it can be driver issue.

Win7 system have to install driver manually.

There is a ‘usb_driver ‘ folder in multi-prog software folder.

Install USB driver according to your system (32 bit or 64 bit).

Then choose device type as USB Serial (CDC), press Install Driver

Check computer device manager see if USB driver is installed properly.

Run multi prog software again.