How to Read Opel Insignia PIN Code with Xhorse

 Possible to read pin code for Opel Insignia with xhorse vvdi mini obd tool?

Yes, it is possible and easy to read pin code for Opel Insignia. Do the same in vvdi key tool max pro.

Go to IMMO Programming->Opel->Read PIN Code->Select Type 5 (IPC)
Read 4-digit pin code successfully.

Then you can add key with pin code.

User feedback:

Opel Insignia, successfully key Add.
Done very simple in 20 min.

Tips to Measure Xhorse Dolphin Battery Voltage with Multi-meter

 We have already shown how to remove the shell and test the battery voltage for Xhorse Dolphin XP005/XP005L key cutting machine.  Some people don’t know how to measure voltage.

Here we will show how to measure battery voltage in detail.

It’s best to take photos to ensure that the gear and pins are correct.

1. Select DC power supply gear, please measure the voltage of these two pins of the battery on the picture below and send us the test result.

2. Please measure the voltage of these two pins of the mainboard follow the step below and send us the result.

First, unplug these two cable on the motherboard

Turn the multimeter to this setting (Diodegear)

Measure the volts of these two pins, and take us a photo like this.

and measure these other two pins value.
(Note the color of the meter pens in the diagram)
www.vvdishop.com

Xhorse VVDI Key Tool Plus Special Function Review

 Apart from IMMO key programming and Prog function, Xhorse VVDI Key Tool Plus also supports many special functions. Here we list all special functions of key tool plus.

File Management

You can find files from the IMMO data tool and files read from immo data right in the Local file. My data file enables you to transfer between KEY TOOL PLUS and PC through the Xhorse cloud disk.

Remote renew

Some original remotes cannot be regenerated after being used. In this case, we need to renew them. After renewing the remote, it becomes a brand-new original key again and can be programmed into various vehicles.

As there are multiple types of keys, please note that make sure your PCB has to be the same as the picture shown on KEY TOOL PLUS. Otherwise, it may fail.

But rest assured. It won’t damage your PCB. As long as you choose the right option, it’ll be working.

IC/ID Clone

To use this function, you have to use a cloneable IC or ID card. Otherwise, KEY TOOL PLUS is not able to write the data into the card.

VVDI remote function

There are many features here, including detecting the remote, customizing key button type, etc. All these features are targeted towards VVDI remotes.

And they are quite useful. For example, after generating a remote and you find the buttons do not match, you can change the button configuration here.

You can also search the usage record of the remote or which options the remote has been generated. All this info can be found here.

Ignition switch coil signal detection

If you don’t know the type of vehicle remote transponder, say 46, 47, or 4D, you can put the collection antenna of the device close to the ignition switch and turn the key several times.

The device will identify the type of vehicle remote transponder.

Please note that it only supports 46, 47, and 4D, and now 8A can not be recognized.

Remote charge battery

The feature is used for old keys like old BMW and Land Rover keys. These keys come with rechargeable and undetachable batteries inside. When the battery is running out, you can place them in KEY TOOL PLUS for charging.

As for the charging time, it’s not for sure. It could be two hours, three hours, or however long. As long as the screen is on, it charges. That’s the charging function of our key.

Unlock Toyota smart key

The feature can wipe out the info of a programmed Toyota smart key and make it programmable again.

One thing you need to know is that it supports 4D 40/80 keys. During the unlocking process, the LED flashes to indicate that the unlocking is successful. Otherwise, it fails.

And it also supports unlocking certain 8A keys. But RF430 series chips are not covered yet.

Honda cycle key renew

Certain Honda motorbike keys can be renewed here and become programmable again.

8E remote upgrade/unlock

It is mainly for VVDI 8E remotes, such as Audi 8E. Audi Q7 A6 keys can be unlocked after being programmed into a vehicle. You can unlock the keys and set the frequency through this function.

Mazda ID49 smart key light repair

It’s acknowledged that the Mazda 49 key has a special feature.

If the original remote is a two-button remote, then you may be able to program it with a three-button remote.

However, after successful programming with the car start function, there will be a light display on the instrument.

We can fix the light display by this function.

Smart key password calculation

It is mainly for Great Wall models and BAIC MOTOR 46 models.

The password is used for programming.

This is how it works. When programming, you’re gonna need the password, and the password can be acquired via KEY TOOL PLUS.

Set type of VVDI super remote

Set type of VVDI super remote function is used to set XT27 transponder as these types.

When it’s not able to recognize the transponder, and you’re not sure whether the transponder is workable or not, you can try the reset VVDI super chip feature.

After successful resetting, it will be workable and can be generated for different types.

Set type of VVDI wireless remote

It’s a pretty simple feature to set type of VVDI wireless remote.

Remote test function

It is mainly used to assist our engineers in solving certain problems. For instance, when a customer has a remote whose type is unknown, the data of the vehicle can be obtained via this feature and help us update our database.

www.vvdishop.com

How to Mill Down Key Blank with Xhorse Dolphin XP005

 Xhorse Condor/Dolphin XP005 key cutting machines have built-in Modify key (Modify Common Key) function that many people did not notify.

When do you need this feature?

Let’s say you’re on a job, and you’re out of blank you need. You know you have keys larger and just wish that your machine could mill down one to the size you need.

It is a feature that is BUILT-IN in Condor/Dolphin!

How to use this feature?

Click ‘Cut by Bitting’. Top right button ‘Modify key’. You can search or look through their info.

A Dolphin user just tested out a KLR key. These aren’t made available yet and the only source has been eday. It just milled down a DAT17 to KLR specs! It’s ready to be cut now! This might only be for high security keys, but it’s something!

 
This can be done with so much more! And you could even mill down flip keys to something you need! It’s a reason you may want to stock a micrometer with metric next to your key machine.

This feature is available on both new and old Condor or dolphins.

www.vvdishop.com

Read and Write DCM7.1AP ECU by Xhorse Multi Prog

 Xhorse Multi Prog read and write TATA Dcm 7.1AP ECU successfully in boot mode.

multi-prog will show you boot pin out.

Read chip ID success.
Read Dflash in 51s
Write Dflash in 14s.

Images attached: