Will Xhorse Mini Key Tool Read Frequency 868mhz?

 Q: My xhorse vvdi mini key tool does not read frequency 868mhz. Already update it. Any solution?

Solution:

We don’t recommend reading frequency 868mhz with xhorse mini key tool.

mini keytool gives amazing strength to frequency test within range of 300-450Mhz. 868mhz sometimes may not be detected, this frequency signal is a bit weak.

If you need to read 868mhz, you can read it on mobile phone.

only connected with phone, then you can change scope.

For example, tried read 868mhz and it works for BMWs on app

Xhorse Ford F150 ID49 Remote Hardware Version too Low

Problem:

 I tried to generate this remote for a 2018 f150 blade key with xhorse vvdi key tool max but I get this message when I try to generate. I am using a 4-button wireless remote XNFO01EN.

“Remote hardware version is too low”

Solution:

First of all better check remote version. Go to Special function–VVDI remote function–detect remote.

Solution 1:

People have used the proximity xhorse (flip style) before to generate that ID49 for ford and it worked as perfectly as the original. Those specific ford keys need the mqb style xhorse proximity key. FYI, Mazda fobs are also ID49, which xhorse can generate. Xhorse can’t generate 49 on standalone chips and remotes with built-in super chips. Proximity are different.

User feedback: I did this job 3 times and worked pretty fine.

Solution 2:

Xhorse cannot generate id49. No change to generate on XN or XE. The new super chip is supposed to be able to do id49.

it’s the xhorse official list of chips it can generate.  it’ll be able to be generated with the new XT27B Super Chip.

To generate this remote you need NEW NXP remote with Xt27B chip.

Solution 3:

Best to simply use OEM even used key, swap blade, program directly in since, they do not lock.

How to Renew Benz Original NEC Key via VVDI MB Tool?

 Original Mercedes Benz NEC key can be renewed by xhorse vvdi mb tool and vvdi key tool plus.

Original Mercedes NEC Key renew procedure: 
NEC chip sits on adapter. After renew, key is ready to write with new rom file.
Another feature is “digging” password – easy with vvdi tools as you can see.

Renew NEC Key with VVDI MB

Go to Read and Write Key function
Select NEC Adapter
Identify key information

Press Read v51 v57 password

Press OK to save EEPROM

Check NEC adapter wiring diagram

Try this VVDI MB NEC adapter. This works always in minutes.

This adapter are tested by many works well but tried the green soldering board some time give error.

For example like this:

Press Renew

The OEM NEC Key has been renewed.

Renew NEC key with Key Tool Plus:

Renew original nec key procedure with keytool plus is similar as vvdi mb tool.

Key tool plus has it own NEC adapters.

Menu path:
Immo programming->Benz-> Select from system-> Read Write Key-> NEC Adapter read and write key

https://www.vvdishop.com/service/renew-benz-nec-key-with-vvd-mb.html

Xhorse VVDI Key Tool Max Pro Language

 Can I switch the language to Russian/Spanish/French?? It is a frequently asked question about the new xhorse vvdi key tool max pro.

No, key tool max pro supports English only in App. 

Database language: English Only.

Other app language requires authorization, including German, Spanish, Persian, French, Hebrew, Hindi, Indonesian, Italian, Korean, Polish, Portuguese, Russian, Thai, Turkish, Ukrainian, Vietnamese etc.

If key tool max pro says the current device does not support this language, i.e Russian, it requires language authorization from local dealer.

If you need a multi-language key tool, go for vvdi key tool max instead.

You can switch languages in App among English, German, Spanish, Persian, French, Hebrew, Hindi, Indonesian, Italian, Korean, Polish, Portuguese, Russian, Thai, Turkish, Ukrainian, and Vietnamese.

Xhorse VVDI Prog Sprinter 0J66D Immo Box Pinout

 Question: Do you know if you can read Sprinter 2003 immo box with xhorse vvdi prog? How should I access it to read it and record chip?

Solution:

Yes, of course, you can read it with vvdiprog, it is from a Sprinter.

No need desoldering for this mask, 0J66D.  Readable without a problem follow the instructions.

For Viano and A class need to desolder.

Sprinter Immo Box 2002-2005 Pinout

You can also read it with carprog and orange5.