Renault Clio IV HFM pinout to VVDI Prog

Here’s the customer sharing Renault HFM Pinout to Xhorse VVDI Prog for thoese who will need it. Cedit to SOXTEN.

Background:

Need to make key for renault capture all keys lost, first need to read dump from hand free module (HFM). He wants to make it with vvdi prog but cannot find vvdi prog pinout. Have pinout from interenet but for orange5 or upa,not for vvdi-prog.

The pic above is UPA pinout and the vvdiprog using the FLMD1 pin. Find with a multimeter.

Result:

Read today hand free module on the renault clio4 card reader,its is renesas v850 D07F3633,

vvdi prog nead FLMD1 and finnally find it,so meaby somebody will need it.

http://blog.vvdishop.com/connect-vvdi-prog-to-renault-clio-iv-hfm-d07f3633/

Mitsubishi Outlander 2007 all key Lost programming with VVDI2

New test report from VVDI user:

Mitsubishi Outlander 2007 all key Lost super fast with Xhorse VVDI Prog and VVDI2 programmer.

Read and save dump 24C16 by vvdiprog

In Immo data tool, file make key by VVDI2

http://blog.vvdishop.com/program-mitsubishi-outlander-2007-all-key-lost-with-vvdi-prog-vvdi2/

Program Toyota Yaris 2009 Remote with VVDI Keytool

Tools required:

Original key

VVDI KEY Tool remote maker

A universal 3-button Toyota remote from Xhorse

Original key

Xhorse remote key

Procedure:

Select Remote/Smart Program->Remote Key->Asia->Toyota->Camry Thailand B44TA 433MHz

Insert xhorse remote key into coil

Press Gen button

Write key in process

VVDI Key tool program remote key succes

Then manually program remote control

Driver’s door open, key removed from ignition switch.
Within 5 seconds:
Insert and remove the key from the ignition switch twice.
Within 40 seconds:
Close and open driver’s door twice.
Insert and remove the key from the ignition switch.
Within 40 seconds:
Close and open driver’s door twice.
Insert the key into the ignition switch and close the driver’s door.
Switch ignition ON and OFF once to program a remote transmitter code whilst retaining the original codes or twice to program a remote transmitter code whilst erasing the original codes.
Remove key from ignition switch:
System should now lock and unlock vehicle once, twice or five times depending which mode has been selected. One to four times, slowly, to indicate number of remote transmitters registered.
Within 40 seconds:
Press and hold LOCK and UNLOCK remote buttons simultaneously for 1.5 seconds
Within 3 seconds:
Press LOCK button.
System should now lock and unlock vehicle once to confirm registration, twice to indicate registration has failed.
Within 40 seconds:
Repeat button procedure to program remaining remote transmitters.
NOTE: To exit programming mode: Open driver’s door. NOTE: A maximum of 4 remote transmitters can be programmed.

www.vvdishop.com

http://blog.vvdishop.com/vvdi-key-tool-program-toyota-yaris-2009-remote-key/

Free Download VVDI Prog V4.8.0 software

Xhorse VVDI PROG programmer software released to V4.8.0.

VVDIProg v4.8.0 (2018-2-27)
* This version DON’t need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.0 version in Doc folder
+ Add 25AA010, 25AA020, 25AA040, 25AA080, 25AA128, 25AA160A, 25AA160B, 25AA256, 25AA320,25AA640, 25LC160A, 25LC160B,
25LC1024 options in <1-EEPROM&FLASH>-><MICROCHIP>
+ Add 25AA010(CLIP), 25AA020(CLIP), 25AA040(CLIP), 25AA080(CLIP), 25AA128(CLIP), 25AA160A(CLIP),25AA160B(CLIP), 25AA256(CLIP),
25AA320(CLIP), 25AA640(CLIP), 25LC160A(CLIP), 25LC160B(CLIP), 25LC1024(CLIP) options in <1-EEPROM&FLASH>-><MICROCHIP(CLIP)>
+ Add MB91F534B options in <2-MCU>-><FUJITSU-MB9XF>
+ Add MC9S12XS64_SECURED, MC9S12XS128_SECURED, MC9S12XS256_SECURED options in <2-MCU>-><MOTOROLA-MC9S12>
+ Add R7F701071 options in <2-MCU>-><RENESAS-RH850>
+ Add F_ENGINE_MEVD1723(F20)EEPROM options in <3-ECU>-><BMW>
+ Add F_ENGINE_MEVD172K(F20)EEPROM options in <3-ECU>-><BMW>

Free Download VVDI Prog V4.8.0 software
https://mega.nz/#!KoYxUSoT!HoPzpmmzGOvdiYw_kfSE0VWkSUfDVns1f_dM_m-vRHY
password:123456

http://www.vvdishop.com/wholesale/vvdi-prog-programmer.html

Xhorse VVDI BMW Programming and Coding Tool Software Preview

VVDI BMW mileage, immo key programming and coding commander is currently under testing by Xhorse experts.

Here’s the function and software preview.

Xhorse VVDI BMW Highlights:
1. Support  E chassis/F chassis Programming function
2. Support E chassis / F chassis code function
3. OBD key Key: Support CAS1/CAS2/CAS3/CAS3+/ISTAP/ etc.
4. File Generation Key: Supports CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAS4+, etc.
5. Support FEM/BDC system to generate keys, replace FEM/BDC control unit, support reset mileage
6. Supports mileage correction CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAS4+
7. Support for reading EEPROM and sync data for CAS1/CAS2/CAS3/CAS3 systems
8. Support simultaneous engine and CAS, synchronous ELV and CAS
9. Support reading SN data from the engine

VVDI BMW Software Display:

www.vvdishop.com

http://blog.vvdishop.com/vvdi-bmw-coding-and-programming-tool-software-preview/