Program Toyota Corolla 2018 Remote Key by Xhorse Key Tool Plus

 Hello guys, today I’m gonna program Toyota Corolla 2018 remote & key clone with the new tool Xhorse VVDI Key Tool Plus Pad.

Generate Remote

Connect VVDI Key Tool Plus Pad with Toyota Remote Key via cable, press

Remote program >> Asia >> TOYOTA >>Corolla

HYQ1 2BDM 14-19 >> Generate

Writing data, please wait…

Burn success. Press “Complete”.

Clone Key Chip

Transponder clone >> Read transponder >> Transponder clone

Following the notes to operate:

1. Put original key into Key Tool Plus to recognize.
2. Put VVDI Super Chip into Key Tool Plus coil to initialize.
3. Server calculated data.
4. Transponder clone.

Press “Start clone”…

Please take out the original car key and better put tin VVDI super chip.

Chip recognition success.

Initialize completed.

Server calculation succeeded.

Successful copy.

Complete!

Program Remote

Connect VVDI Key Tool Plus with OBD2, and turn ignition on, press

Immo programming >> Toyota >> Select by type >> Remote system >> Type 2 >> Begin >> Remote adding

Press both LOCK and UNLOCK button of remote for 4 seconds, then press LOCK button for 1 second(if no programmed, please press both LOCK and UNLOCK button of the key for 4 seconds, after releasing press UNLOCK and LOCK button at the same time.)

Okay it is done.

Let me have a check, everything is work! Job has done.

Toyota Corolla 2018 key remote programming is done. With OBD connect to the Xhorse Key Tool PlusPad, it is quick and easy to operate in 4 minutes.

https://www.vvdishop.com/

Xhorse Key Tool Plus read MSV80 DME ISN

 Xhorse VVDI Key Tool Plus PAD inherited feature of VVDI BMW to read read engine basic information and ECU ISN via OBD. Supports reading ISN from ECU/DME MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851 MED17xx, MVD17xx MEVD17XX MV1722 MED172 MEV17N46 ME17N45 etc.

Here is the demo guide to read MSV80 ECU ISN using key tool plus and  BMW ISN DME cable (fast read no soldering)

Procedure:

Connect BMW DME cable with xhorse key tool plus and MSV80 DME

Select IMMO Programming->BMW->Select from system->ECU ISN->Begin

Select system type: MSV80->Read ECU information

Read ECU basic information VIN, HW, SW, Type etc
Then press Read ECU ISN

The procedure takes 6-10 minutes, switch ON ignition before continue
Enter programming session
Erasing flash

Programming ECU

Processing upload part 2
Checking signature

Read ECU ISN success.

www.vvdishop.com

VVDI Key Tool Plus Pad Program 2012 Jetta All Keys Lost

 Xhorse VVDI Key Tool Plus Pad has the function of vag obd helper which can calculate data online.  Xhorse Pad can calculate data for 4th immo system key adding, all keys lost, 5th immo system key adding, MQB immo system key adding.  This procedure collect vehicle data , then upload to the server to calculate. Enable network connection first.

2012 VW Jetta AKL Using Key Tool Plus Pad Online Calculation Data:

Connect key tool plus pad with vehicle

Select IMMO Programming->VW->Get IMMO Data Online->Begin->MQB/5th/4th IMMO AKL online calculation

Online calculation function can get immo data through the vehicle information to perform key learning.

Reading data in progress

Identify vehicle data, brand, IMMO type, VIN, key number, key ID for online etc

Press OK to uploading data

Connect to server to calculate

Save IMMO data
Press OK to Generate dealer key

Press YES to confirm make VW normal dealer key

Place an unlocked 48 chip into the coil, then click OK to continue

Key make and locked
Remove key/chip from the xhorse pad

Press OK to perform key learning
Input the number of keys you desire to learn

Insert the dealer key into ignition switch in turn, and keep switch on for 2s, the time for change key should less than 5 seconds

All keys successfully learned.
Got back to Get IMMO Data Online
Select by type->Remote System->09 central control system (CAN-BCM)-Begin->Program remote

Learn remote control. You need prepare all key that you want to learn remote control.
Input number of keys need to learn
Take off key. press UNLOCK button 15 seconds for each remote

VVDI Key Tool Plus Program 2012 Jetta remote completed
Test remote control.

www.vvdishop.com

VVDI Key Tool Plus Adds a Key for Range Rover Sport 2008

 How to use Xhorse VVDI Key Tool Plus Pad to add a remote key for Range Rover Sport 2008? This is an operation guide step by step.

Procedure

Prepare 2 keys: an original key and a new key, this is the new blank key to be programmed.

Connect VVDI Key Tool Plus with OBD2 port of vehicle, let’s start

Agree to enter >> Immo programming >> Europe >> Land Rover >> Range Rover >> Ranger Rover (sport) >> 2005-2009

Flip – key type 1 >> Begin >> Program key >> OK

Insert the original key into ignition, keep ignition switch off, press “OK”.

Change to insert the new key, keep ignition switch off, press “OK”.

The inserted key programmed successfully, press “Cancel” to finish.

All keys programmed successfully! Press “OK”.

Operation complete!

Let me test the new key, it can normally start the engine and the remote function is also well.

Key programming has done!

This is my first time to program a new key for Range Rover Sport 2008 using with VVDI Key Tool PlusPad tablet. It is actually fast and easy to be done in 2 minutes, without too many steps in processing. Add key to this model is possible, but cannot do all keys lost.

https://www.vvdishop.com/

VVDI Key Tool Plus BMW CAS3++ All Keys Lost Procedure

 It is recommended to program BMW CAS3++ (ISTAP) CAS4+ all keys lost on bench because it is safer than via OBD.  Xhorse VVDI Key Tool Plus pad has the capacity program CAS3++ AKL via OBD and customer have tested it successfully.  Check step-by-step guide below.  Make sure you have enough power supply.

Vvdi key tool plus bmw cas 3 ++ istap all keys lost all the process:

Connect key tool plus pad with vehicle via OBD socket using main test cable

Select IMMO Programming->Europe->BMW->Automatically diagnose models

Key Tool plus pad will detect system type: CAS3++ (ISTAP)

Select Generate keys via OBD->Read Key information

Here all keys are lost, insert a blank key into ignition switch and connect the vehicle and device well
Click “NO” for All keys lost

Reads key info. 2003 315MHz
The dealer key should be taken away from ignition switch
If key is keyless, move it out of car
If there’s no key in ignition, continue anyway

Reading key info (2 keys have been programmed to this car) and save

Select Prepare dealer key with programmer

select an unused key position

CAS key data is encrypted. support make dealer key for it.
All keys lost require ECU ISN code
If you have ISN code, enter ISN code and continue
Here we don’t have ISN code, press No

and continue

Lost all working key, press Yes

The dealer key should be taken away from ignition switch

Read EEPROM file first for this type, then run File Make Key for this type

Select eeprom bin file saved on the key tool plus
Select an unused key position

CAS3+ encrypt detected. Need working key or DME/DDE dump or ISN
Here we use try start method to start engine, no need working key or engine dump file
Press Yes to continue

If already made new key (already saved new EEPROM dump), press YES, else No
Select No to continue
The vvdi key tool plus pad will ask the current key is smart key or not, it is not smart key, press NO

Save new EEPROM dump file
Flash the new CAS EEPOM dump into car, then use the new dealer key start engine.
If CAS belong to ISTAP4 version, don’t write new dump back to CAS.
If the car can switch ignition on EVEN it can’t start engine, don’t write new dump back to CAS.
Enter try start procedure click Yes, write eeprom dump click NO

Use the current key to start the engine, if start success press YES, else NO.
If can not start engine, take out the key and insert to programmer before press NO.

If engine not running, take out the key and insert to the pad, repeat this procedure until engine runs.

You will have 64 attempts.

After repeat this for over 10 times, the engine runs.

Program a new key success.

www.vvdishop.com

http://blog.vvdishop.com/vvdi-key-tool-plus-program-bmw-cas3-istap-all-keys-lost/