Xhorse Key Tool Plus read MSV80 DME ISN

 Xhorse VVDI Key Tool Plus PAD inherited feature of VVDI BMW to read read engine basic information and ECU ISN via OBD. Supports reading ISN from ECU/DME MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851 MED17xx, MVD17xx MEVD17XX MV1722 MED172 MEV17N46 ME17N45 etc.

Here is the demo guide to read MSV80 ECU ISN using key tool plus and  BMW ISN DME cable (fast read no soldering)

Procedure:

Connect BMW DME cable with xhorse key tool plus and MSV80 DME

Select IMMO Programming->BMW->Select from system->ECU ISN->Begin

Select system type: MSV80->Read ECU information

Read ECU basic information VIN, HW, SW, Type etc
Then press Read ECU ISN

The procedure takes 6-10 minutes, switch ON ignition before continue
Enter programming session
Erasing flash

Programming ECU

Processing upload part 2
Checking signature

Read ECU ISN success.

www.vvdishop.com