ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارDolphin XP005 Cut VW HU66 When All Key lost
I’ve had the Xhorse Dolphin XP005 key cutting machine about 3 months and already paid for about 1/2 the machine. I’m just a mobile programmer. So far I love it. I like the size and portability of it. A real locksmith could pay for this machine in a month !
Today i tested the All Keys Lost function on Condor Dolphin using VVDI Key Tool Max. Easy and quick.
Key code is required when lost all keys.
Combine key tool max and dolphin xp-005
In Xhorse App, select All Keys Lost function->Volkswagen
Manually enter 4-digit key code to continue
Select HU66 8 bitting
Align M2 clamp, press OK
Insert key into dolphin xp-005 clamp, press Cutting Key and select Secondary cutting, press Continue
Cutting key in progress, you can check key cutting process on key tool max
Cut key HU66 completed
Test the new key
It works.
How to Change Battery for Xhorse Dolphin XP005?
Topic: how to replace the old battery with the new one of Xhorse Dolphin XP005 key cutting machine.
PS: usually, the battery life is long enough that the user doesn’t need to replace it.
Look at the new battery of Xhorse Dolphin XP005 cutting machine.
Prepare:
One screwdriver
Procedure:
- Lay the machine, face its base.
- Use a screwdriver to loosen its screws and feet.
You will see the black box, that’s battery which is connected to the machine with 3 wires.
- Unscrew all 8 screws on the two sides.
- Remove the 4 screws on both sides of the battery.
Unplug the 3 wires to the battery.
- The old battery is removed, ready to replace the new battery.
Please do from step 4 to step 1.
Xhorse Dolphin XP005 cutting machine tech support is supplied by www.vvdishop.com
http://www.vvdishop.com/service/replace-xhorse-dolphin-xp005-battery.html
How to Update Condor Dolphin XP005 via Upgrade Kit?
How-to: update Xhorse Dolphin XP005 key cutting machine software/firmware and install driver using Upgrade Kit.
Preparation:
Download Upgrade Kit and install setup
Update the Upgrade kit to the latest version
Connect Dolphin key machine with computer via USB cable
Turn on the Dolphin XP005 machine and connect it with the computer, it will show the BIOS on the screen of Dolphin as below,
Run the upgrade kit and choose ‘Find Device’, it will be show a small window , choose ‘Yes’ and will guide to install the driver
Choose the correct driver according to the machine as below, make sure you are shut down all protection before you install the driver, especially for windows 10 system
You need to download and install Windows driver for Xhorse Dolphin
After the driver has been installed, run the ‘Upgrade kit’ and choose ‘Find Device’ again, to see if you can see the device serial number and firmware version, do not chose ‘Upgrade’ until it you can see that , because if you can’t find device ,which means the driver is not been installed, and the machine will be blocked if you update it without driver
Press “Upgrade” and wait till the procedure completed
Update succeed.
Dolphin XP005 Adds Key Biting Scanning
Xhorse App V1.6.7 adds key bitting scanning from photo function.
Xhorse App V1.6.7 Update:
Support connect more than 1 device at the same time
Support scan key bitting from photo
Improvement for online copy
Improvement for auto connect
Improvement for search remote
Xhorse DOLPHIN XP005 key cutting machine now with key scanning functions. Will improve more in time.
