How to Transfer USB Files to Xhorse VVDI Key Tool Plus

Here we are going to show how to transfer file from USB drive to Xhorse VVDI Key Tool Plus. After transmission, we can read the file to make dealer key directly.

Step1. Copy from USB to KTP

Use the Xhorse VVDI MLB Tool USB cable to connect USB & device.

Settings >> Storage >> SMI USB drive >> Long press USB file >> More >> Copy to device

*You must find the correct Xhorse folder:

com.xhorse.assembly\share\BMW\CAS123\test

Click “Copy”.

Now we’ve successfully copy the file.

Step2. Read USB File

Let’s go back to have a check.

Immo data tool >> Opel >> IMMO – 1 >> 68HC05 >> Start >> Selected the copied file

We can see there are 2 keys to make dealer key. One is the copied file.

If the file was read with failed and Key Tool Plus says: “This file is not supported by current module!”

You may rename the file like this:

“CAS4+[5M48H]-BACKUP(WELD)-D-FLASH-20240928”.BIN

Now the file can be successfully read out.