VVDI Key Tool Plus Program Alfa Romeo Giulia Key via SW-007 Watch

 Using Xhorse VVDI Key Tool Plus to program SW-007 Smart Remote Watch for a vehicle can be used as VVDI Remotes. To easily control your vehicle such as lock/unlock doors or start the engine. Since the universal Keyless Go watch is compatible with over 30,000 models, next we’ll program it on 2017 Alfa Romeo Giulia for a try.

Operation

1. Generate Smart Remote Control

Put the Xhorse Smart Watch into VVDI Key Tool Plus coil.

Remote program >> AlfaRomeo >> GIULIA >> GIULIA KeylessGo ID4A >> Generate

Generate remote success.

2. Read PIN Code

Connect VVDI Key Tool Plus to OBD.

Immo programming >> AlfaRomeo >> By model >> Immo system >> GIULIA >> 2015- >> Keyless Go >> Start programming >> Read PIN code

Switch ignition on.

Pincode was successfully read out.

3. Program Smart Remote Watch

Go in”Smart key adding”.

Switch ignition off, and turn onsecurity warning light. Click”OK”.

Key Tool Plus will auto input the password.

The smart key sensing area is located in the middle armrest box. When prompted to press the remote after clicking “OK”, do not take out the sensing area, press remote in sensing area directly.

Keep pressing and releasing the Unlock button on watch within 30s…

Programmed successfully.

Go out to test with the car.

Wecan open the trunk, unlock car and start engine directly by the xhorse sw-007 smart watch.

Easy done.

Actually smart and convenient!

www.vvdishop.com