Program Porsche Cayenne 08 All Keys Lost with VVDI2

Here’s the demo guide on how to program new key for Porsche Cayenne when all keys lost.

Fold keys are divided into two frequency, 315M is the ordinary fold, and 433M smart key, both of them can use write start all key lost. Below is operation procedure in detail.

For Porsche Cayenne Key Programming:

1.Dismantle the KESSY Module

Under the steering wheel to find KESSY computer, dismantle the KESSY Module. As shown below, a black box.

Open the shell, in the computer board near the CPU to find 8 pin chip, model num is 93C86. Use programmer, VVDI Prog, Xprog etc to read the data.

2.Write start key

Use TM100 Transponder Key Programmer, VVDI or other wirte start device to load the data that read from 93C86 chip. The following I use VVDI make a demo:

1）Open the VVDI2 Key Programmer Software,then select “Immo data processing tool”,”Porsche”, Car Model”Cayenne”,type”93C86″

2）Then load in the data form 93C86 Chip,VVDI2 will display the key information include “ID” and “Key Number” and so on.Put a new key into the VVDI2 coil.Click to generate dealer key,the device will generate a new 93C86 file(save it),and it will remind you that”the dealer key generate successful”.

3)Load the new 93C86 file into Xhorse VVDI2 to check 3 key information in the data as shown below.

4) Use the VVD2 write the new 93C86 file back in 93C86 chip and weld it back on KESSY Computer，assemble KESSY on your car.

Done.

Reference:

How To Add New Key For Porsche Cayenne

For Porsche Cayenne made before 2004.06:

Read out immobilizer PIN,and then short circuit pin 3 to pin 7 of OBD port with 5053.

Then you can start program key

For Porsche Cayenne made from 2004.06 to 2006:

Read the immobilizer PIN by programmer,but it can not program key by common key programmer.(Only by VVDI Programmer or Original manufacturer device)

For Porsche Cayenne made from 2007 to 2010:

Some Porsche Cayenne made during this period can do key programed by VVDI device.

And for others,you need to remove the ECU,disassemble the storager chip,near CPU,typed 95160.

Read out the data file by programmer.

Open the data file.

The pin code locate at section 040 and 060,12th and 13th byte. Convert the hex system to decimalism,then you get the PIN.

Note:Before you program for next key,insert the key to ignition and turn it the “ON” position,but do not start the engine,and wait for 3 seconds,then you will sound the “beep” of unlocking.

Turn off the ignition,and then you can start programming next key.

How to Calculate Porsche Cayenne PIN Code

If you ever programmed keys for Porsche Cayenne,it needs PIN code for programming. But in some situation,you can not read out the PIN code by Key Programmer.And you must to remove the ECU,and read out the data file from a chip 95128,and then calculate data file to obtain the PIN.And here’s the guide on how to calculate PIN code for Porsche Cayenne and Tiguan 2009.

For Posche Cayenne and Tiguan made after 2009,you must remove the ECU to get the PIN code.

How to calculate PIN code:

1. Remove ECU form vehicle

2. Locate the chip 95128 near the CPU,and remove the 95128 chip from ECU PCB by soldering iron.

3. Read out the data file from 95128,and save it on the laptop.

4. Calculate the PIN code from data file.

AS below show,the 1A15 is the pin code. Convert it from hex adecimal to decimalism is 5402. 

http://blog.vvdishop.com/program-porsche-cayenne-2008-all-keys-lost-with-vvdi2/

VVDI2 VAG Program Passat 2014 All Keys Lost Guide

Here’s the guide to program smart key for VW Passat 2012 year when all keys are lost by using Xhorse VVDI2 VAG key programmer.

Step 1:

Read key tooth with Lishi HU66 2-in-1 pick/decoder and cut a spare key with Condor XC-Mini key cutting machine.

Step 2:

Connect the fuse next to the left door, 2nd on Line 1 and 1st on Line 3

Dashboard turns on at this time

Step 3:

Connect VVDI2 with vehicle

Select dash type: 2012 VDO NEC+ 24C64

Enter 03 BAS

Take a photo of /write down the long code

Step 4:

Remove instrument, find out 24C64 CPU chip, read EEPROM data with ecu programmer, i.e VVDI Prog, Yanhua CKM100 etc

Save eeprom dump.

Step 5:

Open VVDI2 VAG loader

Select Key Learn->4th generation immobilizer->Dash-NEC+24C64

Select All Keys Lost

Select Generate service pattern 24C64 EEPROM

Save eeprom (do not replace the original eeprom file)

Re-write eeprom generated in service pattern back to CPU chip and reinstall to vehicle

Step 6:

Remove the coil of the steering column, follow step 2 to turn on the dash.

Connect VVDI2, select dash type

Complete following steps to program key:

1.Dashboard turns black, complete all these steps to reset instrument

2.Read eeprom data and save

3.Read immo data and save

4.Generate dealer key

5.Reset instrument

6.Add a key

7. Perform other functions

Upload eeprom data and write eeprom

Read Immo data and save

Select Generate dealer key

Reset instrument

Add a key

Backup eeprom and immo data before key learning

Learn key. Upload immobilizer data to add a key

Remove the fuse.

Program Passat 2012 all keys lost success.

www.vvdishop.com

http://blog.vvdishop.com/program-passat-2012-all-keys-lost-with-vvdi2-vag/

Free Download Xhorse VVDI2 V4.7.5 software

Xhorse VVDI2 VAG BMW Porsche PSA key programmer software released to v4.7.5(2017-10-16).
===== Support software version ====
VVDI2 VAG V4.7.5
VVDI2 BMW V4.7.5
VVDI2 Porsche V4.7.5
VVDI2 PSA V4.7.5
Passthru J2534 V4.7.5
Online Update Tool V4.7.5
Quick Start V4.7.5

You can find the detail update information from Readme in newest software,

Mainly include:
1. Support copy 48 transponder(96 bit, All car with ID48 transponder), (Menu->Key Learn->Copy 48 transponder(96 bit, All car with ID48 transponder))
About copy 48 function on VVDI2:
(1). Authorize copy 48 function(96 bit) require buy license and a extra 48 emulator
(2). Every success calculate will cost 100 remote points or pay 10 USD
(3). Copy 48 function now support all the cars with ID48 transponder: VW, Audi, Skoda, Volvo, Honda, Buick, Cadillac, Fiat, GreatWall, Zhonghua etc
(4). Copy 48 function no need OBDII connect

2. Bugfix

===== BMW V4.7.5 =====
1. Bugfix

===== Porsche V4.7.5 =====
1. Bugfix

===== PSA V4.7.5 =====
1. Bugfix

===== Transponder Programmer V4.7.5 =====
1. Bugfix

===== J2534 V4.7.5 =====
1. Bugfix

===== Online Upate Tool V4.7.5 =====
1. Fix some update problem
2. Bugfix

===== Quick Start V4.7.5 =====
1. Bugfix
Notes:because xhorse still building new server and running with high cost on electrical power,the copy 48(96bits) is optional function, currently remote points only for Chinese users, after server all ok the online calculation speed should be 3-5 minutes, calculation time also can buy (10 USD per/time).

Free Download VVDI2 v4.7.5 software

https://mega.nz/#!H5pCSYzT!akF-tFND1xV-2B8IytLn9cQBSCg6-flZ252gqCHIwPw

www.vvdishop.com

Free VVDI2 EDC17 and MEV17 Authorization Activation

Good News!!! All user of VVDI2 VAG, for EDC17 and MEV17 for online CS calculation you can your serial to activate for free (without buying Condor key cutting machine).

With the authorization you can: OBD read MED17/EDC17 PIN / CS / MAC, calculate OBD data online, calculate EEPROM / FLASH for PIN/MAC/CS.

Please send your VVDI2 key programmer Serial Number to Xhorse engineer Samic’s skype: live:condor_keymachine or vvdishop.com customer service skype: VVDIfactory.com

If you are a member of Digital-Kaos forum, you can send SN to Samic directly to activate for free.

www.vvdishop.com

XHorse VVDI2 V4.6.0 Software Free Download

Original Xhorse VVDI2 key programmer software update to V4.6.0 (2017-09-27). The new upgrade adds new NEC+24C64 dashboard cars.

Software version: V4.6.0

Firmware version: V4.6.0

*** 2017-09-27
*** Require firmware V4.6.0

===== VAG V4.6.0 =====
1. Support the new NEC+24C64 dashboard after 2014.06, support Black/White, color TFT, 3D dashboard, include following cars:
VW T5 2014.06-2016
VW T6 2015.06-2017
VW Sharan 2014.06-
VW Passat 2014.06-2016
VW Caddy 2014.06-2017
VW Jetta 2014.06-2016
VW Scirocco 2014.06-
VW Tiguan 2014.06-
VW Touran 2014.06-
VW EOS 2014.06-
VW CC 2014.06-2016
VW Golf 2014.06-
VW Amarok 2014.06-
Skoda Yeti 2014.06-
Seat Alhambra 2014.06-
Audi A1 2014.06-
Audi Q3 2014.06-
Attention: Don’t support MQB platform
2. Bugfix for BCM2 dump tool
3. Bugfix===== BMW V4.6.0 =====
1. Improvement for BMW FEM/BDC key learn
2. Support auto backup ECU ISN data, files saved at: My Document->VVDI2->FEM_BDC
3. Bugfix===== Porsche V4.6.0 =====
1. Bugfix

===== PSA V4.6.0 =====
1. Bugfix

===== Transponder Programmer V4.6.0 =====
1. Bugfix for old wire remotes
2. Add english database, require change VVDI2 register area, contact dealer for help
3. Bugfix

===== J2534 V4.6.0 =====
1. Bugfix

===== Online Upate Tool V4.6.0 =====
1. Bugfix

===== Quick Start V4.6.0 =====
1. Bugfix

Free Download VVDI2 V4.6.0 Software
https://mega.nz/#!C4IHSAYS!46Ya5q7gdX2njle-7zcZuroIHSsPFenqCB_EqaeccKM