Failed to Program Ford F150 4C Key with VVDI Super Chip?

 Problem:

I’ve got the xhorse vvdi XT27a super chip transponder generated by key tool max but it won’t learn on the 2002 Ford F150.  I’ve learned keys before with no issue doing this but for some reason this won’t work.

Solution:

Not 4d 63, use 4c chip. H72 with 4C chip.
Need better transponder, ford’s antenna isn’t strong enough to read those chips.
Use genuine big glass 4c chip. Older Fords do not like taking generated 4c chip. Use a glass 4c chip and then clone that to a Xhorse super chip and should work fine. See it all the time.

User feedback:

I removed the clam shell, generated the chip to 4C, and put the chip right inside the coil antenna. Then I was able to learn the chip. I temporarily placed the chip in the antenna on its own while I get the proper 4C chip.

Xhorse VVDI Super Chip Generate GM 7937 Transponder

 If cannot generate GM 7937 transponder with xhorse vvdi mini key tool and super chip xt27. Here is the solution.

Go under id46 (PCF7936), then select 46-GM

It’s under 7936, it will say E or Extended. but it does work.

Rather than ID46 PCF7937 menu

Clone Ford Focus 2014 4D+ 83 Remote via VVDI Super Chip

How to clone 2014- Ford Focus remote key on an xhorse vvdi super chip.

Chip type: 4D+ 83

Device to clone: xhorse vvdi mini key tool

Chip to clone: vvdi super chip xt27

Result: success!

Steps:
1. put the original key into the mini key tool coil to recognize
2. put the original key into the mini key tool coil to calculate
3. query the calculated results from the server
4. transponder clone

Generate Honda Civic ID46 Key with VVDI Super Chip

 Question:

For a 2009 honda civic which id46 used for a xhorse vvdi super chip 7936/7937 with key tool max?

 

Solution:

Use ID46 PCF7936. Same as Honda Civic 2006-2011

Generate transponder, pcf7936, New 7936. Works perfectly, just used it for a 2010 Civic AKL job, both the flip and spare key work fine.

Xhorse Super Chip Benz W461 ID33 Key Not Working?

 Problem:

It is a  Mercedes G 300 Worker (W461) year 2012, chip ID33. Chip clone with vvdi super chip and mini key tool success, but starting no.

Its an OBD or read on bench job?

Solution:

It is an ID33 rolling and can’t be cloned. It will clone successfully but won’t start the vehicle more than once. It’s a rolling code transponder.

It works on Renault and other mid-range vehicles, but it doesn’t work on Mercedes because it’s a rolling code, it only turns on once and then it doesn’t function anymore.
You can’t generate those chips with the majority of the programs, only tango original,kr55 or avdi original. If you don’t have it you can’t get it done, and it’s an EEPROM job the mcu has to be desoldered.
Take out immo read with programming tool (best desolder MCU ) generate chip with and key tool ( even Gambit can do the chip by dump ) tango, zedbull , anything that makes old mercedes with id33.
The process is simple to ews keys for BMW.
Kr55 best one tool for whole job if you have it.

http://blog.vvdishop.com/possible-to-clone-ews3-ews4-key-with-xhorse-super-chip/

FYI:

Clone Renault Clio ID33 car will start. ID33 for clio is fixed code, not rolling code as Mercedes.