Xhorse Key Tool Plus Adds BMW M4 2017 FEM key on bench

 Xhorse VVDI Key Tool Plus supports adding new keys for BMW M4 2017 FEM/BDC system on bench successfully.

Here is a quick demonstration:

1. FEM/BDC Programming

Immo programming >> Europe >> BMW >> Select from systems >> FEM/BDC IMMO system >> Key function >> Start programming >> Read key information >> Continue >> Continue >> Programming FEM/BDC system >> Process Wizard mode >> Begin

Reading coding…completed.

• Read & save EEPROM data

Open FEM/BDC module, read EEPROM dump via programmer. Press “OK” to view the 95128/95256 chip position.

Press “Yes” to continue.

Start to read original 95128/95256 EEPROM data.

Please confirm you have completed:

1. Disconnect FEM/BDC module power;
2. Disconnect the OBD connection between the VVDI Key Tool Plus and module;
3. Connect the adapter.

OK >> Read >> Continue

Read successfully.

• Write EEPROM data

Make sure the adapter is connected properly, press “OK” to start to write service mode EEPROM.

Write >> Continue

Please restore FEM/BDC system, provide +12v and connect OBD, press “Yes”.

Open FEM/BDC shell, write the original EEPROM data to 95128/95256 chip, press “Yes”.

Start to write back original 95128/95256 EEPROM data.

Please follow the prompts to operate.

Write >> Continue >> OK

Write successfully.

Do you want to verify the write coding? Yes

FEM/BDC programming success, you can make new dealer key from the main window!

2. Program New Key

Prepare dealer key with ignition switch >> Select a blank key position: Key 4 >> Have a working key, use this key switch ignition on then click this item

Insert working key to ignition switch.

Record the key information, press “OK”.

Insert the new key into ignition or keep the new key close to emergency start position of the vehicle.

Key learn success!

3. Test Key

Both the original key and new key can start the engine, and the remote are workable.

This is using Xhorse Key Tool Plus to program a BMW M4 2017 new key successfully.

https://www.vvdishop.com/

Xhorse Key Tool Plus Program Range Rover 2016 Key via OBD

 Xhorse VVDI Key Tool Plus Pad is able to add a new smart key for 2016 Range Rover via OBD without assembly successfully.

Plug VVDI Key Tool Plus connector into OBD port, press

Immo programming >> LandRover >> LandRover(2015-2018) >> OBD matching without disassembly >> Start programming >> Smart key recognition

Put the original working key into Key Tool Plus coil, press “OK”.

To check the key ID: 1C043035

Select “Smart key adding/all key lost”.

Note: key adding will not delete the programmed key

OK >> OK

Do not remove the original working key, press “OK”.

Select a key location with Key ID to write: Key position 0

Put the new key to be programmed into Xhorse Key Tool Plus coil, press “OK”.

Programming success.

Let’s test the keys, both of remotes are fine, and can start the engine.

Done!

Programming a new 2016 Range Rover key with VVDI Key Tool Plus is easy to be done in 2 minutes

https://www.vvdishop.com/

Xhorse Dolphin XP005 cut Volvo NE66 Key

 Just got a new device Xhorse VVDI Key Tool Plus recently, so today I wanna test it to control Dolphin XP005 Key Cutting Machine to cut a Volvo NE66 key.

Firstly you should get the bitting key code, it’s H05933, 3312-2134.

After connecting Key Tool Plus with Dolphin XP005, press

Cutting key >> All key lost >> Volvo >> Input key code, query >> NE66, 4-4 bitting

It shows the key bitting and requires to install M2-A clamp tip align position 2.

Fix the key blank on M2 clamp firmly, press “Cut”.

Dolphin XP005 machine starts cutting…

Wait cutting finished.

Then turn over to cut the other side.

Press “Cut” to wait…

Alright, completed!

Let’s try it in the door lock, it can work smoothly.

Done!

This is using VVDI Key Tool Plus to control Dolphin XP005 to cut NE66 when all key lost. It also supports to smart control other Xhorse machines like Condor XC-Mini Plus, XC-Mini and Panda.

https://www.vvdishop.com/

Xhorse Key Tool Plus Program Range Rover 2015 All Keys Lost

Here comes a new customer test report of xhorse vvdi key tool plus pad: 2015 Range rover sport 5-button smart key al keys lost done. Need KVM out.

Don’t need to do both parts of the programming (BCM & KVM), program key in KVM only.

The Xhorse KVM solder free adapter makes KVM reading job easier.

Some images are attached:

www.vvdishop.com

Clone Chevrolet Colorado 2009 ID48 Key with Xhorse Key Tool Plus

 How to use Xhorse VVDI Key Tool Plus to clone Chip 48 online for a Chevrolet Colorado Z71 2009? Here I’ll make a quick demo to show the steps.

Tools

A working key

A new blank key with Super Chip XT27A66

Xhorse VVDI Key Tool Plus

Procedure

Put the working key into Key Tool Plus coil, press

Transponder clone >> Read transponder

As you can see, it is a ID48 chip.

It’ll requires 100 points for ID48(96bit) online calculation.

Clone >> Start clone

Data collecting… put coil near ignition start and switch on off, then remove key out 8 times.

1 time successful in collect data,

2 time successful in collect data…

Repeat 8 times to finish.

Put original working key into Key Tool Plus coil to calculate.

Upload data success.

Wait Xhorse server for calculating…

Read original working key success.

The the working out, put Super Chip XT27 into coil.

Cloning successfully.

Now put the VVDI Super Chip into new key to have a try.

It can start the engine.

Done!

This is using Xhorse VVDI Key Tool Plus & XT27 Super Chip to clone ID48 for Chevy Colorado  Z71 2009 successfully.

https://www.vvdishop.com/