ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارXhorse Key Tool Program RANGE ROVER VELAR 2018 Smart Key?
Xhorse VVDI Key Tool Plus tablet adds Range Rover Velar 2018 Smart Key via OBD in 2 minutes.
What is required?
The original key
A new blank JLR key that allow ID to be changed, i.e Lonsdor JLR key
VVDI key tool plus
Select IMMO Programming- Land rover – Landrover 2015-2018 – OBD matching without disassembly – Smart key adding/ all key lost
Put an original key that can start the car into this coil
key adding will not delete the programmed key
all key lost will delete at the programmed original keys
Put an original key that can start the car into xhorse key tool plus key coil
Select Key position 0 to write start key
Put the key to be programmed into the coil.
Writing key
Make dealer key success
Program complete.
Test new key
VVDI Key Tool Plus Generate Super Chip on 2015 Nissan Rogue
This post is showing how to use Xhorse VVDI Key Tool Plus Pad to clone and generate a VVDI Super Chip key for 2015 Nissan Rogue.
Tools required:
Original key
New blank key
Xhorse Condor XC-009 key cutting machine
Procedure
- Clone Key
Put the original key into VVDI Key Tool Plus coil, press
Transponder clone >> Read transponder
Confirm the transponder is 46 type.
Transponder clone >> Start clone >> Transponder clone
Just follow the notes:
Do not remove the original key.
Reading data successfully.
Take out the original key, put a VVDI Super Chip into Key Tool Plus coil.
Copy successfully.
Press “Complete”.
- Cut Key
Install the programmed Super Chip into the blank key.
Here we go to Condor XC-009 machine.
Place original key on guide clamp while blank key on cut clamp.
Check the spacing and tip alignment.
Then start to cut.
- Program Key
- Insert original key into ignition to start the vehicle.
- Once running and all dash lights are off. Remove the original key and use new key to start the vehicle.
If vehicle starts normally, which means the key was successfully programmed.
Done!
Program Porsche Cayenne 2011 All Keys Lost by Xhorse Key Tool Plus
Use Xhorse VVDI Key Tool Plus + Solder Free Adapters can program 2011 Porsche Cayenne all keys lost quickly without soldering.
Since customer has lost all keys, I’ll use the BCM adapter XDNP17 to connect with VVDI Key Tool Plus for data reading.
After 5M48H D-Flash backup successfully in Prog.
Let’s get start to program a key.
Immo programming >> Europe >> Porsche >> New Porsche key – generate dealer key >> start programming >> Generate key >> EEPROM(5M48H) >> OK >> Load EEPROM file, open
Put a key to be programmed into VVDI Key Tool Plus coil slot.
Select a blank key position: Key 4
Start making key, please wait…
OK >> Save here >> OK
Generate key successfully. Just refresh the newly saved file to the car.
You can also learn the new key to the car via OBD!
If you want to add new key, please use the newly saved file to generate.
Amazing quick to be done!
Xhorse Solder Free Adapters Set has saved me much time on routine work. Should be an must have tool for each locksmith.
Program 2021 Ford Bronco AKL with Xhorse Key Tool Plus
Xhorse VVDI Key Tool Plus Pad is able to program 2021 Ford Bronco Sport all keys lost via OBD successfully. Following I’m gonna try to add these 2 keys for this vehicle.
Backup P-Flash & D-Flash
Connect VVDI Key Tool Plus with OBD, press
Immo programming >> North America >> Ford >> China market >> Select by model >> Escape >> Smart key system >> 2020- >> Start programming
Follow the instructions:
Open and close driver door once and turn off ignition switch.
OK >> Backup P-Flash
VVDI Key Tool Plus displays a Warning:
Black screen may appear during the execution of this function, which is normal.
Press “Yes” to continue.
It may take about 20 minutes to save P-Flash.
As I have already did, so I just show you the steps and go back.
Press “Backup D-Flash” to save the file as before.
This is just in case everything gets messed up in the system, then you can have your backup.
Program New Keys
Press “Lost all key” after completing all backups.
Yes >> Select P-Flash >> Open
All keys will be cleared, Press “Yes” to continue.
Note: at least 2 keys are needed to complete the key programming!
Key clearing succeeded!
Current number of keys: 0
For smart key: place the new key to be programmed into car emergency sensing area and continue.
For flip key: insert the key to be programmed and turn on ignition switch.
Press “OK”.
You’ll hear the locks coming on and off.
Current number of key: 1
Program successfully! Press “Yes” to program next key.
Just repeat same operations as first key.
Current number of keys: 2
Program successfully. Press “No” to complete.
Finally, let’s have a test.
Both keys are workable, done!
Using VVDI Key Tool Plus to program 2021 Ford Bronco Sport when all keys lost successfully.
How to Unlock BMW Remote with Xhorse Key Tool Plus by EEPROM?
Xhorse vvdi key tool plus has the option to unlock BMW remote key by eeprom no open remote nor soldering. Take a CAS2 remote key example here.
Read CAS3 eeprom and save
Go to Immo Programming – BMW – Select from system – CAS2 system – Unlock Key – Start programming – Use EEPROM to unlock key
Upload eeprom file you saved
Put locked key into xhorse key tool plus induction coil
Unlock CAS2 remote success.
