How to: correct odometer on VAG NEC+24C64 2014.06- dashboard using the Xhorse iScancar VAG MM-007 service tool.
Model example: VW Tiguan 20TSI 4motion DSG7 swap cluster
Record original mileage: 114, 625km
Select Special Function from main menu
Then KM calibration-> Dashboard
Select instrument type: NEC+24C64 (2014.06- VW/Skoda/Seat)
Press OK to continue
Xhorse VAG MM-007 reads old KM, check and confirm
Then input the new KM
The dashboard will turn black during the writing km procedure. It is normal.
Dash will be reset after writing new KM successfully.
Check the new mileage.
It corrects mileage successfully.
Here with this tool it works- Xhorse Iscancar VAG MM-007. Swap cluster (adjust the odometer) on VW Tiguan 2.0TSI 4motion DSG7 3D cluster 1104 successfully.
Change KM with VAG MM-007
Original Odometer: 14625km
Desired Odometer: 10000km
How-to:
Connect VAG MM-007 with vehicle and turn on the scanner
Go to Main menu-> Special Function- > KM Calibration- > Dashboard->choose cluster type NEC+24C64 (2014.06- VW Skoda Seat)- >Tiguan 2014
Xhorse VAG MM-007 will detect original mileage. It is very similar to the original KM
Choose login method 1
The instrument cluster turns black, it is normal. It will be reset when correct mileage is completed.
Enjoy.