Program Porsche Boxster 2016 key with VVDI2

How to add Keyless Go Porsche Boxster GTS 2016 smart key with VVDI Prog and VVDI2 key programmer.

Step 1: Read BCM data with VVDI Prog

Remove Porsche PCM module under the steering wheel

Open pcm and connect it with VVDI Prog programmer

Select Type: 4th Immobilizer, Porsche BCM-5M48H backup

Follow VVDI-Prog wiring diagram to make good connection using MC9S12 reflash adapter

Read and then save D FLASH bin file

Read and save P FLASH bin file

Select Chip: BCM 5M48H R/W/UNLOCK

Read and save D Flash unlock bin file

Step 2: Add Dealer Key with VVDI2 Porsche

Open VVDI2 software

Select Porsche

Prepare Dealer Key-EEPROM (5M48H)

Click on Load file and load D Flash unlock bin file

VVDI2 shows key ID and info.

Press OK to save new eeprom dump file as “D FLASH KEY READY”

Add dealer key success. Learn the new dealer key via OBDII or flash the new file into car.

Step 3: Write back data to car

Open VVDI Prog software

Open “D FLASH KEY READY” bin file

Press “Write” button

Operation success

Test the new smart key. Working!!!

http://www.vvdishop.com/service/program-porsche-boxster-2016-smart-key-with-vvdi-prog-and-vvdi2-6053.html

Xhorse VVDI Prog V4.6.7 new pinouts list

Xhorse VVDI PROG programmer latest software version V4.6.7 updated

————————————-
v4.6.7 (2018-01-27)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.7 version in Doc folder
* ESW3 change Read/Write mode
+ Add 25LC010, 25LC020, 25LC040, 25LC080, 25LC160, 25LC320, 25LC640, 25LC128, 25LC256, 25LC512 options in <1-EEPROM&FLASH>-><MICROCHIP>
+ Add TC97010(CLIP) option in <1-EEPROM&FLASH>-><TOSHIBA(CLIP)>
+ Add MB91F060, MB91F062, MB91F067, MB91F575, MB91F577, MB91F578C, MB91F579C, MB91F591B, MB91F592B, MB91F594B, MB91F596B, MB91F597B,
MB91F599B, MB91F59AC, MB91F59BC options in <2-MCU>-><FYJITSU-MB91F>
+ Add MC68HC05E6 option in <2-MCU>-><MOTOROLA-MC68HC(7)05>
+ Add W203(AM29F400BB) option in <3-ECU>-><BENZ>
+ Add ME7 option in <3-ECU>-><BOSCH>
+ Add IAW 4AC.A4 option in <3-ECU>-><MAGNETI-MARELLI>
+ Add EIS-W203-1J35D(ADAPTER), EIS-W203-1J74Y(ADAPTER), EIS-W203-2J74Y(ADAPTER), EIS-W203-3J74Y(ADAPTER), EIS-W203-4J74Y(ADAPTER),
EIZ-W209-HC12(ADAPTER), EIZ-W211-HC12(ADAPTER), EIZ-W209-ST12(ADAPTER), EIZ-W211-ST12(ADAPTER), EIZ-W215-ST12(ADAPTER), EIZ-W220-ST12(ADAPTER),
EIZ-W230-ST12(ADAPTER), EIZ-W164-ST12(ADAPTER), EIZ-W169-V1-ST12(ADAPTER), EIZ_VITO_ST12(ADAPTER), EIZ_SPRINGTER(ADAPTER), EIS-W639-0L02M(ADAPTER),
EIS-W639-1L02M(ADAPTER), EIS-W639-3K85K(ADAPTER), EIS-W639-1J35D(ADAPTER), EIS-W639-4J74Y(ADAPTER), HC05E6_REMOTE(0F82B) options in <4-IMMOBILIZER>-><BENZ>
+ Add EWS3—KLINE(0D46J)_READ, EWS3—KLINE(0D46J)_WRITE options in <4-IMMOBILIZER>-><BMW>
+ Add EPICA_BCM(–2009), SAIL_IMMOBOX(–2009) option in <4-IMMOBILIZER>-><CHEVROLET> (Support read PASSWORD)
+ Add IX35(2015)(MC9S12XD256) option in <4-IMMOBILIZER>-><HYUNDAI>
+ Add OPEL_IMMOBOX(–2009) option in <4-IMMOBILIZER>-><OPEL> (Support read PASSWORD)
+ Add JETTA_IMMOBOX(–2008) option in <4-IMMOBILIZER>-><VOLKSWAGEN> (Support read PASSWORD)
+ LINGZHI_M5(2016)(MC9S12HY64) option in <5-DASHBOARD>-><DONGFENG>
+ LAVIDA_DASHBOARD(D79F3422) option in <5-DASHBOARD>-><VOLKSWAGEN>
+ VERNA(D70F3421) option in <5-DASHBOARD>-><HYUNDAI>
+ TIGGO5(MB91F594BS) option in <5-DASHBOARD>-><CHERY>
+ PRIDE option in <7-AIRBAG>-><OTHERS>

Free Download VVDI Prog software 4.6.7

https://mega.nz/#!6pZDxYza!JtyvGWXT5dhU2hVsZ9kNEjPqZaIY6Q0SfNkQO6MM4KA
password:123456

Xhorse BENZ EZS/EIS adapters for VVDI Prog Full Set 10pcs 

VVDI Prog v4.6.7 new added pinouts:

Airbag IRAN CARS PRIDE

Benz W203 ECU AM29F400BB

Bosch ME7.9.7.1 ECU ST10F275

Bosch ME7 ECU ST10F275

Chery Tiggos Dashboard (2016-) MB91F594BS

RENESAS V850E2/DP4-H (uPD70F3535/36/37)

RENESAS V850E2/DN4-H (uPD70F3532)

DONGFENG LINGZHI-M5 Dashboard (2016) 0M34S (MC9S12HY64)

EPICA BCM (–2009)

Fujitsu MB91F57xx

Fujitsu MB91F59xx

Hyundai IX35 Immobilizer (2015) MC9S12XD256VAG 1M84E

Jetta BCM (–2009)

VAG Lavida Dashboard (D70F3422)

Marelli IAW 4AC.A4 ECU ST10F273

MC68HC05E6 (0F82B,0G72G)

Opel Sail BCM (–2009)

Hyundai Verna Dashboard (D70F3421)

Benz VITO W639 ST12 Adapter

Benz W169 ST12 Adapter

Benz W203 HC08 Adapter

Benz W209/W211 ZGW Adapter

W211 ST12 Adapter

W215/W220/W230 adapter

Benz W639 HC08 adapter

Sprinter ST12 adapter

http://blog.vvdishop.com/xhorse-vvdi-prog-update-to-v4-6-7/

How to Program BMW EWS4 key with VVDI Prog EWS4 adapter

Here’s little guide to make BMW X3 EWS4 transponder key with new VVDI PROG EWS4 adapter and VVDI2 key programmer.

Step 1: Read EWS4 Eeprom by VVDI Prog

Remove dash

Take out EWS4 immo box

Disassemble the EWS4 module

Put EWS4 module in the VVDI PROG EWS4 adapter and lock it

Connect VVDI PROG with EWS4 adapter, then connect vvdi programmer with computer with USB cable

Open VVDI Prog software

Select Type 4th Immo, BMW and chip EWS4 adapter

Check connection diagram

Click Read ID to identify the Micro and make sure that the connection is correct to avoid possible failures.

Chip initialization, make sure all chip type matches

It has to match any of them, if not, it is connected badly

Click Read to read eeprom data and save it

Step 2: Program EWS4 key by VVDI2 BMW

Open VVDI2 software

Select Transponder Programmer

Select Auto detect Transponder: PCF7935

Choose Immobilizer Data Tool function

Select region, vehicle make and immo type

Click Load EEPROM Dump

select an unused key position and press Make Dealer Key

Prepare dealer key success. Now the key can start engine.

Reinstall EWS4 module back to car.

Test the new key, remote works, car starts

Done.

www.vvdishop.com

http://blog.vvdishop.com/program-bmw-ews4-key-with-vvdi-prog-and-vvdi2/

Xhorse VVDI Prog 2018 new adapters 10pcs

Xhorse company released some new adapters for VVDI Prog programmer in January  2018.

1. Xhorse XDPG13CH AM29FxxxB for VVDI Prog 10pcs

2.Xhorse XDPG14CH MC68HC05X32(QFP64) Adapter for VVDI Prog 10pcs

3.XHORSE XDPG15CH MC68HC05BX(PLCC52) Adapters 10pcs

4.Xhorse VVDI Prog Mercedes Benz EZS/EIS adapters Full Set 10pcs

10pcs VVDI EIS/EZS Adapter listing:

for W164(ST12),

for W169(ST12),

for W203(HC08),

for W209/211(ZWG),

for W209/211(HC12),

for W211(ST12),

for W215/220/230,

for W639(HC08),

for SPRINTER(ST12),

for VITO W639(ST12).

http://www.vvdishop.com/producttags/vvdi-prog-adapter.html

Delphi MT60 MT80 with TRICORE Pinout to VVDI-Prog

Read EEprom + Flash very easy by can line Am29f400.

Here’s the pinout Delphi-MT60/MT80 with TRICORE shared by Xhorse VVDI Prog programmer user carcity from DK forum.

Delphi MT60/MT80
With Tricore IC
Connection by VVDI-Prog ECU cable :
(Note: unsolder PIN 122 from PCB )

www.vvdishop.com

http://blog.vvdishop.com/use-vvdi-prog-to-read-delphi-mt60-mt80-with-tricore/