How to Add MLB Key by VVDI MLB Tool and VVDI2

 We have shown how to add an MLB key with VVDI MLB Tool and VVDI Key Tool Plus (check instructions). Here we will show how to use the MLB-Tool with VVDI2 to add key Audi MLB.

Procedure:

Follow the diagram to solder wires to vvdi mlb tool.

Download and install MLB tool software.

Connect MLB Tool with computer.
Put the key on the identification area.

Run VVDI MLB Tool software.

Identify key
Key is locked and initialized.

Select Collect Key Data
Select the method for collect key data as needed.

No OEM key here means using the original key.
Use the OEM key here means using VVDI dedicated MLB key. Use VVDI MLB does not deduct points.

Data calculation completed.

Press OK for verification.
Data verification is successful.

The data can be used to make dealer key.
Select Make dealer key.

Then we learn key with VVDI2 programmer.
Turn on the ignition switch
Connect VVDI2 with vehicle and PC
Place the original key in the induction area.

Run VVDI2 software and select correspoding vehicle software, i.e Audi
Select Key Learn->MLB Immobilizer System

Read vehicle information and press Key Learning
Both keys need to be learned.

Upload IMMO data read by Xhorse VVDI MLB Tool

Start key learning.
Learn 1st key success.

Place new key in the induction area
Learn 2nd key successfully.

All keys are successfully learned now.

Test the key function.
Smart function working as expected
One touch start ok, remote control, and keyless all working

https://www.vvdishop.com/service/how-to-use-vvdi-mlb-tool-with-vvdi2-to-add-mlb-key.html