How to program BMW FEM BDC key by VVDI2 V4.3.0

Xhorse VVDI2 key programmer V4.3.0 software released BMW FEM/BDC system key programming function.

VVDI2 V4.3.0 update (2017-08-16)
*** Require firmware V4.3.0
************************************************* *********************
===== VAG V4.3.0 =====
1. Bugfix===== BMW V4.3.0 =====
1. Add BMW FEM/BDC system key learning, erase key
2. Add BMW FEM/BDC system reset KM
3. Add FEM/BDC syste backup coding, restore coding
4. Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer for help!===== Porsche V4.3.0 =====
1. Bugfix===== PSA V4.3.0 =====
1. Bugfix===== Transponder Programmer V4.3.0 =====
1. Bugfix

===== J2534 V4.3.0 =====
1. Bugfix

===== Online Upate Tool V4.3.0 =====
1. Bugfix

===== Quick Start V4.3.0 =====
1. Bugfix

Free Download VVDI2 V4.3.0 software
https://mega.nz/#!W1pSRRTL!0n8OX4wshaB1s0O06SDhTR0KvO32nPHZWg4CQjBMdrA

FAQ:

Q: After activation the fem bdc it will work without tokens？
A:  Yes.

VVDI2 – BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if ‘get key info’ the type not support, it will show:customer should use “BMW E-sys software” program FEM/BDC system.then programming FEM/BDC system with VVDI2 BMW
4.when operation on ‘programming FEM/BDC system’interface,please don’t close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use “BMW E-sys software” coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

If your vvdi2 already bind to condor,then BMW FEM/BDC = 600 USD
without condor: BMW FEM/BDC = 800usdPls note:

1.Your vvdi2 must already has BMW OBD functions
2.After payment, pls give us serial number of VVDI2 and condor(if you have)

Instructions of FEM/BDC:
http://www.vvdishop.com/info/how-to-use-the-bmw-fem-bdc–18197.html

BMW FEM/BDC Authorization for VVDI2 (With Condor)

BMW FEM/BDC Authorization for VVDI2 (Without Condor)

VVDI 2 Updated to V4.3.1 (2017-08-18)
Free Download VVDI2 V4.3.1 Software
For 4.3.0 software users, just download 4.3.1 directly, no need update firmware again.

Require firmware V4.3.0
************************************************* *********************
===== VAG V4.3.1 =====
1. Copy 48 function: Support Passat B6/CC with 48 transponder
2. Bugfix

===== BMW V4.3.1 =====
1. Improvement for BMW FEM/BDC key learn
2. Bugfix

===== Porsche V4.3.0 =====
1. Bugfix

===== PSA V4.3.0 =====
1. Bugfix

===== Transponder Programmer V4.3.0 =====
1. Bugfix

===== J2534 V4.3.0 =====
1. Bugfix

===== Online Upate Tool V4.3.0 =====
1. Bugfix

www.vvdishop.com