Xhorse VVDI Key Tool Plus Read BMW N63 ISN Code

 Will Xhorse vvdi key tool plus read BMW CAS4+ (engine N63) ISN code? via OBD or Bench?

Yes, it will read N63 ISN on bench.

Don’t enter from Programmer->BMW menu.

Go to Prog->ECU->BMW

Drop down and select F engine MEVD1728 (N63/S63)

You need Bosch ECU adapter XDNP30 to read ISN.

Key tool plus will show to wiring diagram to connect ECU adapter and ECU

Then follow the prompts to read ISN code.

www.vvdishop.com

How to Get VW NEC35xx CS PIN with VVDI Key Tool Plus No Soldering

 How to get the CS and PIN code of Volkswagen Skoda white meter petrol car without lifting the pin or cutting the track? Following we’re gonna to do it with Xhorse VVDI Key Tool Plus. In this way, we can read the meter data for mileage adjustment. If it’s not working, we can also read and write this data directly for any online programming or coding.

Connection

Immo programming >> VW >> Select by type >> 4th immo system – Volkswagen/Skoda/Seat >> Instrument with NEC35xx >> Star programming >> Instrument NEC35xx lock >> OK

*Make sure the Network connection is normal.

Programmer reads files >> Adapter method

Here we can see the connection diagram.

It requires the XDNP87GLSolder Free Adapter.

With it, you don’t need to lift any pins from MCU or cutting wires on adapter. You won’t take risk to damage it.

Connect the solder-free adapter to MQB48 dashboard.

After done, connect to VVDI Key Tool Plus& a 12V power.

Get CS & PIN Code

Read >> Continue

Reading success.

Save the data file.

Obtaining immo data >> OK >> Load the saved data

Reading immo data successfully.

Click “OK” to save.

Generate dealer key – Load immo data >> Load immo data file

As we can see, the CS & PIN codes have already been available.

In this way, you don’t need to pay for the third party for password.

www.vvdishop.com

How to Add BMW 2019 BDC Key with VVDI Key Tool Plus via OBD

 How-to: add a spare key to BMW Serie 2 gran tourer year 2019 F46 smart key with xhorse vvdi key tool plus via OBD.

Select IMMO programming->BMW->Auto detect vehicle

Detect type as FEM/DC

Read key information
Need unlock, the software is 080, it is safe to be done via OBD

Select Unlock FEM/BDC system
Support Unlock BDC via OBD directly
Read and save coding

Unlock requires 13+ power supply, the unlock procedure takes about 10 minutes
Unlock BDC via OBD success

Read key information again
BDC is unlocked

Select Prepare dealer key with the ignition switch
Select an unused key position to write key
Here we add a spare key using vvdi key tool plus. Select Hava a working key and turn on the ignition switch

Record FEM/BDC information and ISN

Insert the new key into ignition or keep the new key close to emergency start position of the vehicle.

Learn key success

Test the new key.

www.vvdishop.com

Xhorse Program Audi A3 2014 MQB AKL by Solder Free Adapter

 Xhorse vvdi key tool plus read Audi A3 2014 MQB instrument cluster immo data and program all keys lost successfully using the MQB solder free adapter.

That board cannot be done by obd. I cannot enter service Mode because all keys lost. I need the key learn in the car for enter service Mode. Or i can send data of 01 engine and 17 instrument cluster for calc immo data and sync data but isn’t more expensive. If i read the cluster with vvdi key tool plus (as in the photos) with the file vvdi send immo data, only pay for the sync file. Program key the work it’s done.

These MQB adapters in my opinion are fast, safe. Works fine.

Processor MCU: D70F3537

Using XDNP85 solder free adapter.

Images attached:

www.vvdishop.com

If need the whole procedure, check guide here

Xhorse VVDI Key Tool Plus Read MQB D70F3537 No Soldering

VVDI Key Tool Plus Program 2020 Volvo XC90 Smart Key

This is a 2020 Volvo XC90 with all keys lost, so we’re about to program a new key for this car with Xhorse VVDI Key Tool Plus. Since I’ve already took out the module to get data, following I’ll just program the key directly.

Put the new key into car coil slot, it’s right here beside the armrest.

Plug VVDI Key Tool Plus into OBD port.

Immo programming >> Volvo >> XC90 >> 2015- >> Smart key system >> Start programming >> Read the number of keys

Knob start button: turn Start knob to the right once then release Pushbutton.

Start button: press the start button once and then release it.

The current number of keys: 3

Press “Add smart keys”.

Risk warning:

1. This process need disassemble and read CEM module data, please operate with caution;
2. Some modules(MPC5748G) need external 100ohm resistor, non-professionals do not operate;
3. If the programming process is abnormal, please use original factory special inspection for operation.

Click “Yes”.

Whether the CEM data has been read?

Click “OK” to load CEM file.

Knob start button: turn Start knob to the right once then release the Push button.

Start button: press the start button once and then release it.

Place a key to be programmed into the vvdi key tool plus sensing area, take other keys out of the car.

The currently key is matched successfully.

www.vvdishop.com