Will Xhorse VVDI MLB Tool Unlock VW Audi MLB Key?

 Question:

Is it possible to reuse an Audi MLB key fob. Xhorse vvdi key tool plus has these options. Can we read key with VVDI MLB Tool and reset the key fob to a new state? What option… Recover the key / Upgrade OEM keys? Any idea?

Solution:

VVDI MLB keys can be reused.

OEM can be virgin as well. If it used then can’t be unlocked.

If order an OEM key, by vin, from the dealer…but don’t program it to the car…you can unlock it and use it on another car.

If it is a used OEM key. You won’t be able to reuse.

How to Modify VVDI MLB Tool Firmware for MQB48 Adapter

 Xhorse VVDI MLB Tool updated MQB48 NEC35XX immo data collection function recently. Follow the steps below to update your VVDI MLB Tool firmware to use MQB48 adapter.

The MQB48 adapter comes with solder wires and an enhanced version replacement chip.

Remove 4 screws on the back of the MLB tool and open the shell.

Remove 2 screws on the main board and check out the other side.

This is the front of the main board.

Replace this chip using the enhanced replacement chip in the package.

After replacing the chip, reinstall the VVDI MLB Tool.

Then you can use the MQB48 adapter to collect immo data.

NOTE: Both the device and the adapter need to be connected to a power supply !!!

How to Get MLB CS PIN with VVDI MLB Tool

By using with Xhorse VVDI MLB Tool, we can get the synchro, CS & Pin from the original key for backup. After successful MLB data collection and calculation, this data is available after the dealer key was generated. Detailed steps are as follows:

Step1. Identifiaction Key

Please place the key in the device identification area for identification.

Step2. Collect Key Data

Open the original car key, connect the original car key PCB as shown in the diagram, and click the collect key data button after connection. It will take about 3-4 minutes. The server takes approximately 10s to calculate. After the calculation is completed, please save the calculation results.

Step3. Make Dealer Key

Load the calculation data saved in the step2 and generate dealer keys. Then use VVDI2 or KEY TOOL PLUS for key learning.

Run VVDI2 software and select correspoding vehicle software, i.e Audi
Select Key Learn->MLB Immobilizer System.

Upload data read by MLB tool. Then you will get CS and PIN.

VVDI MLB Tool KYDZ Key Not Found or Locked?

Problem:

I cannot program the generated file in the new (KYDZ MLB) key. The Xhorse VVDI MLB Tool adapter recognizes the key, but at the time of programming it shows that it is not found or blocked. When I simply check the key, that see it.

Solution:

You can’t generate dealer key on kydz key with vvdi tool. If you want to use vvdi MLB tool only OEM virgin key or vvdi special key. Kydz works only with kydz MLB tool.

Xhorse MLB specialized key is not yet released. So use original key.

www.vvdishop.com

Xhorse VVDI MLB Tool Read Porsche MLB Key Immo Data

How-to: read Porsche MLB Key Immo Data by Xhorse VVDI MLB Tool Key programmer.

Place the key in the device identification area and click OK for identification.

Read key ID and info. The key is locked.

Remove key shell and take out PCB.

Check wiring diagram. Need to remove capacitors.

Then solder wires to the key board.

Place the key in the VVDI MLB Tool identification area and click OK for identification again.

Select Collect key data.

Choose Collect original keys- points deduction. The calculation will deduct 200 points.

Online calculate immo data completed.

Save data.

Now you can make dealer key and learn MLB key.

www.vvdishop.com