Xhorse XEPG00EN or B5 Super Remote to Generate PSA ID4A Remote

 Question:

Xhorse XEPG00EN board does NOT WORK on Peugeot, and Citroen cars with 4A chip. Generation is ok, but not work.

Solution:

You cannot generate this option with Xhorse XEPG00EN PSA remote key.

You should use blue NXP remote.

Or use the ZEB510en B5 model vvdi super remote with XT27B chip to generate.

You can also mqb style smart remote it will work.

For example:

2019 Peugeot 2008 key XEPG00EN (XT27B super chip) remote is not working. ZEB510EN B5 super remote works perfectly.
Works absolutely fine.

Xhorse Multi Prog VW MQB Golf7 Chip Configuration Failed

Problem:

Has anyone successfully read mqb r7f701402 golf7 2020 cluster with Xhorse multi prog? I did everything as they said. But multiprog gives error “Chip configuration failed”.

Solution:

This instrument cluster is MQB49.

Detect original key with vvdi key tool and check it is MQB48 or MQB49 key.

If it is MQB49, multi prog will not read cluster and decode immo data.

Only 5A cluster for immo data decoding
5C only for KM. Cannot do immo data.
Mqb 49 is not decoded by any machine.

www.vvdishop.com

How to Remove Xhorse XM38 Supercar Style Smart Key

 This is a tutorial on how to disassemble Xhorse XM38 Supercar Style Universal Smart Key step by step.

Disassembly Procedure

1. Press the button to remove the Supercar key blank base.

2. Locate the pry spot and gently open along the groove.

3. Remove the ramaining parts in sequence.

4. Assemble XM38 Supercar Key back together.

www.vvdishop.com

How to Clone Jeep GPEC3 ECM with Xhorse Multi Prog?

User tested report: Xhorse Multi Prog cloned Jeep Compass 2021 GPEC3 ECM/ECU/PCM successfully and FC200 failed.

Select Jeep- Compass- FCA Continental GPEC3

Check boot mode wiring diagram

Connect multi prog programmer with ECM via ECU adapter. Pay attention to the boot pins.

We have backed up the original ECM eeprom and flash.

Upload original EEPROM and write to the donor ECM.

Write eeprom successfully. Then write flash to the donor ECM until completed.

GPEC3 cloning is done.

www.vvdishop.com

How to Get VVDI Key Tool Plus Free MB Tokens

How to Get Free MB Tokens for VVDI MB or Key Tool Plus?

Combining the key cutting machine serial number and the device serial number allows you to earn up to 2 free MB tokens per day!

NOTE:
*The tokens are not cumulative and are refreshed daily.
*Both types of devices (key cutting machine + VVDI KEY TOOL PLUS/VVDI MB TOOL) must be combined.
*The serial number of the device needs to be sent to your local dealer for uploading to the system for combining.
*Combining Panda Series Key Cutting Machines cannot get tokens.